The PRIMA POWER PLATINO 1530HS laser was built by Prima Industrie S.p.A. in 2006 in Italy. The machine is used for cutting sheets of 20 mm thick black steel, 12 mm thick stainless steel and 8 mm thick aluminum. The laser is equipped with a Primach 20L CNC control and has a power of 4 kW. In addition to the X, Y, Z axes, the machine has an independent F axis with the possibility of programming the focus position and the distance of the nozzle. The X / Y / Z / F axes have maximum feeds of 3050 mm, 1525 mm, 150 mm and 25 mm, respectively. The machine is equipped with: Prima Power Convergent Lasers Division CP4000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitrogen mounted on the beam. The device weighs 10 tons. A new turbine has been installed in the machine.

Characteristics of the PRIMA POWER PLATINO 1530 HS laser
- laser power: 4 kW
- maximum cutting thickness (black steel): 20 mm
- maximum cutting thickness (stainless steel): 12 mm
- maximum cutting thickness (aluminum): 8 mm
- independent F axis with programmable focus position and nozzle distance
- maximum feeds in the X / Y / Z / F axes: 3050/1525/150 / 25mm
- maximum feed speed in the X and Y axes: 100 m / min.
- maximum simultaneous feed speed in both X and Y axes: 140 m / min.
- capacitive sensor of a constant distance between the cutting head and the sheet surface
- linear axis resolution: 0.001 mm
- positioning accuracy (Pa): 0.03 mm
- repeatability: 0.03 mm
- maximum power consumption: 55 kW
- voltage: 400 V / 50 Hz
- minimum air pressure: 7 bar
- maximum air consumption: 70 m3 / h
- average air consumption: 52 m3 / h
- dimensions of the machine (with an automatic pallet exchanger and housing) (length x width x height): 10600 x 3540 x 2500 mm
- laser weight PLATINO 1530HS: 10 t

Equipment of the PRIMA POWER PLATINO 1530HS laser
- CNC control: Primach 20L
- resonator: Prima Power Convergent Lasers Division CP4000
- CAM software
- laser source: CP4000
- network card for CNC
- CNC console
- chiller
- data transmission: RJ45 and USB
- material position recognition system on the table
- plasma monitoring and reboot system
- support table with a fixed pallet, comb type
- automatic table exchanger type PA
- high pressure cutting kit and gas switch
- Teleservice module with installation and configuration
- lubricating device for fast burn-through
- air dryer and filters
- cutting head with anti-collision mechanism
- cylinder regulators made of chrome-plated brass with a stainless steel diaphragm (3 pcs.)
- cylinder reducers for oxygen and nitrogen (2 pcs.)

Technical specification of the Prima Power Convergent Lasers Division CP4000 resonator
- installed power: 4000 W
- power range: 200-3000 W
- wavelength: 10.6 micrometers
- pulse frequency: 0-2 kHz
- pulse width:> 250 microseconds
- wavelength: 10.6 micrometers

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Metal length 3050 mm
Power 4000 W
Metal width 1525 mm
Option to cut tubes no
Max thickness 20 mm
CNC yes
CNC type Primach 20L
Travel X 3050 mm
Travel Y 1525 mm
Travel Z 150 mm
-------------------
Length x width x height 10600.0 × 3540.0 × 2500.0
Weight 10000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Description

The PRIMA POWER PLATINO 1530HS laser was built by Prima Industrie S.p.A. in 2006 in Italy. The machine is used for cutting sheets of 20 mm thick black steel, 12 mm thick stainless steel and 8 mm thick aluminum. The laser is equipped with a Primach 20L CNC control and has a power of 4 kW. In addition to the X, Y, Z axes, the machine has an independent F axis with the possibility of programming the focus position and the distance of the nozzle. The X / Y / Z / F axes have maximum feeds of 3050 mm, 1525 mm, 150 mm and 25 mm, respectively. The machine is equipped with: Prima Power Convergent Lasers Division CP4000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitrogen mounted on the beam. The device weighs 10 tons. A new turbine has been installed in the machine.

Characteristics of the PRIMA POWER PLATINO 1530 HS laser
- laser power: 4 kW
- maximum cutting thickness (black steel): 20 mm
- maximum cutting thickness (stainless steel): 12 mm
- maximum cutting thickness (aluminum): 8 mm
- independent F axis with programmable focus position and nozzle distance
- maximum feeds in the X / Y / Z / F axes: 3050/1525/150 / 25mm
- maximum feed speed in the X and Y axes: 100 m / min.
- maximum simultaneous feed speed in both X and Y axes: 140 m / min.
- capacitive sensor of a constant distance between the cutting head and the sheet surface
- linear axis resolution: 0.001 mm
- positioning accuracy (Pa): 0.03 mm
- repeatability: 0.03 mm
- maximum power consumption: 55 kW
- voltage: 400 V / 50 Hz
- minimum air pressure: 7 bar
- maximum air consumption: 70 m3 / h
- average air consumption: 52 m3 / h
- dimensions of the machine (with an automatic pallet exchanger and housing) (length x width x height): 10600 x 3540 x 2500 mm
- laser weight PLATINO 1530HS: 10 t

Equipment of the PRIMA POWER PLATINO 1530HS laser
- CNC control: Primach 20L
- resonator: Prima Power Convergent Lasers Division CP4000
- CAM software
- laser source: CP4000
- network card for CNC
- CNC console
- chiller
- data transmission: RJ45 and USB
- material position recognition system on the table
- plasma monitoring and reboot system
- support table with a fixed pallet, comb type
- automatic table exchanger type PA
- high pressure cutting kit and gas switch
- Teleservice module with installation and configuration
- lubricating device for fast burn-through
- air dryer and filters
- cutting head with anti-collision mechanism
- cylinder regulators made of chrome-plated brass with a stainless steel diaphragm (3 pcs.)
- cylinder reducers for oxygen and nitrogen (2 pcs.)

Technical specification of the Prima Power Convergent Lasers Division CP4000 resonator
- installed power: 4000 W
- power range: 200-3000 W
- wavelength: 10.6 micrometers
- pulse frequency: 0-2 kHz
- pulse width:> 250 microseconds
- wavelength: 10.6 micrometers

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Metal length 3050 mm
Power 4000 W
Metal width 1525 mm
Option to cut tubes no
Max thickness 20 mm
CNC yes
CNC type Primach 20L
Travel X 3050 mm
Travel Y 1525 mm
Travel Z 150 mm
-------------------
Length x width x height 10600.0 × 3540.0 × 2500.0
Weight 10000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Here is a selection of similar machines

Prima Power Platino 1530HS laser cutting machine