Sorry, this offer is no longer available on Exapro

Priess & Horstmann BAT - III - CNC drilling machine

Here is a selection of similar machines

Drilling and hinges inserting machine
Make: Priess & Horstmann
Type: BAT - III - CNC
Year: 1995

for drilling and inserting of hinges, as well as drillings for drawer adapters, buttons, handles and centering marks for special fittings on covers, sliders and other fronts.

Working width: 190 - 1000 mm
Working depth: 100 - 600 mm
Workpiece thickness : 16 - 25 mm
Working height: 1000 mm

Technical data:

Working width: 190 - 1000 mm
Working depth: 100 - 600 mm
Workpiece thickness: 16 - 25 mm
Working height: 1000 mm

Servo - positioning system:
Desired and actual value display for the X and Y axis by CNC.

Cycle time:
per drilling and inserting cycle: approx. 5 sec.
per additional drilling cycle: approx. 2 sec.

CNC - monitor controll

Machine is equipped with:
1 serial interface (RS 232), for installation of a PC for programming and for saving datas, max. transmission length without converter 20m.

1 fixed support table left, 1 on a workpiece length adustable support table right. Adjustment by a servo positioning system (X3-axis)

1 automatic infeed system for the workpieces.

1 Servo positioning system (X1 axis) for the support.

1 Drilling unit for additional drillings, drilling from below, with counter-pressure cylinder.

1 Gear box with 9 single controllable spindles (spindle torque 600 rpm), aligning in Y direction down.

1 Support table, liftable, moving with the drilling unit of the 2 positions mentioned above.

1 Inserting unit for buffers. Supply of the buffers by an oscillating conveyors attached to the basic machine.

1 Grooving unit (1,6 KW, approx. 7500 rpm) with tooth belt transmission, tool holder Ø 30 mm.

1 Drilling unit for additional drillings, driiling from top, with counter-pressure cylinder and single spindle drilling unit (n=6000 rpm), arranged exactly over a spindle of the gear box from below.

1 Milling unit for recessed handle, with Perske HF motor, 2,2 KW / 300 Hz, workpiece infeed with tool chuck Ø 12 mm

1 additional processing support, consisting of:
- 1 Servo-positioning system for the X axis (X2 axis).
- 1 Compound slide with precision guidance for adjustment of the additional units in machine depth with servo positioning system (Y2 axis).
- 1 Drilling unit for additional drillings, end position scanning with contacless limit switch (initiatos) drilling from below, with counter-pressure cylinder.
- 1 Gear box with 9 single controllable spindles (torque 6000 rpm). Aligned in Y direction.
- 1 Support table, liftable with the drilling unit moving from below.
- 1 Additional inserting unit for buffer. Infeed of the buffer by an oscillating conveyor.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Nbr of heads 3
Engine power 1.6 kW
CNC Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2013
Offers online 33
Last activity March 28, 2024

Description

Drilling and hinges inserting machine
Make: Priess & Horstmann
Type: BAT - III - CNC
Year: 1995

for drilling and inserting of hinges, as well as drillings for drawer adapters, buttons, handles and centering marks for special fittings on covers, sliders and other fronts.

Working width: 190 - 1000 mm
Working depth: 100 - 600 mm
Workpiece thickness : 16 - 25 mm
Working height: 1000 mm

Technical data:

Working width: 190 - 1000 mm
Working depth: 100 - 600 mm
Workpiece thickness: 16 - 25 mm
Working height: 1000 mm

Servo - positioning system:
Desired and actual value display for the X and Y axis by CNC.

Cycle time:
per drilling and inserting cycle: approx. 5 sec.
per additional drilling cycle: approx. 2 sec.

CNC - monitor controll

Machine is equipped with:
1 serial interface (RS 232), for installation of a PC for programming and for saving datas, max. transmission length without converter 20m.

1 fixed support table left, 1 on a workpiece length adustable support table right. Adjustment by a servo positioning system (X3-axis)

1 automatic infeed system for the workpieces.

1 Servo positioning system (X1 axis) for the support.

1 Drilling unit for additional drillings, drilling from below, with counter-pressure cylinder.

1 Gear box with 9 single controllable spindles (spindle torque 600 rpm), aligning in Y direction down.

1 Support table, liftable, moving with the drilling unit of the 2 positions mentioned above.

1 Inserting unit for buffers. Supply of the buffers by an oscillating conveyors attached to the basic machine.

1 Grooving unit (1,6 KW, approx. 7500 rpm) with tooth belt transmission, tool holder Ø 30 mm.

1 Drilling unit for additional drillings, driiling from top, with counter-pressure cylinder and single spindle drilling unit (n=6000 rpm), arranged exactly over a spindle of the gear box from below.

1 Milling unit for recessed handle, with Perske HF motor, 2,2 KW / 300 Hz, workpiece infeed with tool chuck Ø 12 mm

1 additional processing support, consisting of:
- 1 Servo-positioning system for the X axis (X2 axis).
- 1 Compound slide with precision guidance for adjustment of the additional units in machine depth with servo positioning system (Y2 axis).
- 1 Drilling unit for additional drillings, end position scanning with contacless limit switch (initiatos) drilling from below, with counter-pressure cylinder.
- 1 Gear box with 9 single controllable spindles (torque 6000 rpm). Aligned in Y direction.
- 1 Support table, liftable with the drilling unit moving from below.
- 1 Additional inserting unit for buffer. Infeed of the buffer by an oscillating conveyor.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Nbr of heads 3
Engine power 1.6 kW
CNC Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2013
Offers online 33
Last activity March 28, 2024