45,000 €
Make an offer| Power in tons | 65 T |
| Table length | 820 mm |
| Table width | 580 mm |
| Nbr of strokes/min | 73 |
| ------------------- | |
| worked hours | 5 hours |
| hours under power | 5 hours |
| state | rebuilt |
| At local norms | yes |
| status | visible but unplugged |
| Datasheet | Pressix T65 CNR4 |
| Last availability date | 03/02/2026 |
This listing features a PRESSIX mechanical eccentric press, model T65 CNR4 CE, with a force capacity of 65 tons. Manufactured in 2026, this machine is designed for precision metal forming and pressing operations. The press has a robust working table measuring 820 mm in length and 580 mm in width, suitable for various tooling setups. The slider dimensions are 470 x 340 mm, and the maximum height under the ram is 320 mm, allowing accommodation of diverse workpieces.
The machine operates at 400 V and 50 Hz, with a nominal power of 650 kN and an energy rating of 3,440 kJ. It offers an adjustable stroke range from 10 to 120 mm and a slider adjustment capacity of 100 mm. The press cycle cadence reaches up to 73 cycles per minute, with a rapid stop time of 0.154 seconds at the top dead center (P.M.S.). It also features hydraulic systems for overload protection and ram release to enhance operational safety and efficiency.
Control options include two-hand controls and pedal controls, providing flexibility in operation. The press is equipped with a hydraulic system to protect both the die and the machine from overload conditions. Safety features include front and side transparent protective guards with metal frames and safety keys, ensuring operator protection during use.
Visible components from the images show a clean, well-maintained machine with an orange crank and ram assembly, a metal working table with grooves and slots for tooling, and side panels that can be opened for maintenance access. The control panel, located on the right side, includes buttons and indicator lights, along with an emergency stop button and a green start button. Pneumatic components such as two large air tanks and pressure gauges are mounted at the rear, and the electrical panel is installed on the left side of the machine base.
The machine weighs approximately 5,000 kg and comes with a user and maintenance manual as well as a CE certificate of conformity. During its 2026 reconditioning, several key components were replaced with new parts, including motor and flywheel bearings, clutch components, hydraulic seals, air pressure gauges, safety guards, and the electrical panel was updated with remote assistance capabilities.
Overall, this PRESSIX T65 CNR4 CE eccentric press offers a combination of high pressing force, comprehensive safety features, and modern control systems suitable for demanding industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
It is available for sale in Italy and can be seen in operation in person or through videos.
Mechanical Press with Eccentric PRESSIX 65 Tons Force
The machine has been completely overhauled and comes with a warranty.
Mechanical components warranty: 6 (six) months.
12 (twelve) month warranty on electrical panel
Features:
PRESSIX 65 Ton Force Press
Model T65 CNR4 CE
Year of manufacture 2002
Year of reconditioning 2026
Nominal power kN 650
Energy kJ 3,440
Adjustable stroke mm 10 120
Slider adjustment mm 100
Cadence 73 cycles min
Stop at P.M.S.
Stop time 0.154 seconds
Air pressure min. max. BAR 4 5.5
Voltage V 400 50Hz
Machine weight Kg. 5,000
Information for using the punches:
Dimensions Table 820 x 580 x 68 mm
Slider dimensions 470 x 340 mm
Punch diameter 45 mm
Maximum height under ram (P.M.I. adjustment all the way up) 320 mm
Minimum distance between table and ram 280 mm
Maximum stroke for extracting parts 40 mm
Maximum weight of upper part of punch Kg. 136
The machine is equipped with:
Two-hand controls
Pedal controls
Hydraulic system to protect the die and press from overload
Hydraulic system for ram release
User and maintenance manual
CE certificate of conformity
During reconditioning in 2026, the following were replaced with NEW COMPONENTS:
Motor bearings;
Flywheel bearings;
Bearings for rotating joints;
Guide shaft bearings;
Clutch disc blades;
Clutch pins and caps;
Clutch gaskets;
Hydraulic overload gasket;
Hydraulic overload pipe;
Balancing cylinder seals;
Air pressure gauges;
Front and side safety guards with safety keys;
Refurbished work surface on CNC machine;
Pedal assembly;
Remote-assisted electrical panel.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Consultant / Intermediary |
| Active since | 2018 |
| Offers online | 3 |
| Last activity | April 7, 2026 |
It is available for sale in Italy and can be seen in operation in person or through videos.
Mechanical Press with Eccentric PRESSIX 65 Tons Force
The machine has been completely overhauled and comes with a warranty.
Mechanical components warranty: 6 (six) months.
12 (twelve) month warranty on electrical panel
Features:
PRESSIX 65 Ton Force Press
Model T65 CNR4 CE
Year of manufacture 2002
Year of reconditioning 2026
Nominal power kN 650
Energy kJ 3,440
Adjustable stroke mm 10 120
Slider adjustment mm 100
Cadence 73 cycles min
Stop at P.M.S.
Stop time 0.154 seconds
Air pressure min. max. BAR 4 5.5
Voltage V 400 50Hz
Machine weight Kg. 5,000
Information for using the punches:
Dimensions Table 820 x 580 x 68 mm
Slider dimensions 470 x 340 mm
Punch diameter 45 mm
Maximum height under ram (P.M.I. adjustment all the way up) 320 mm
Minimum distance between table and ram 280 mm
Maximum stroke for extracting parts 40 mm
Maximum weight of upper part of punch Kg. 136
The machine is equipped with:
Two-hand controls
Pedal controls
Hydraulic system to protect the die and press from overload
Hydraulic system for ram release
User and maintenance manual
CE certificate of conformity
During reconditioning in 2026, the following were replaced with NEW COMPONENTS:
Motor bearings;
Flywheel bearings;
Bearings for rotating joints;
Guide shaft bearings;
Clutch disc blades;
Clutch pins and caps;
Clutch gaskets;
Hydraulic overload gasket;
Hydraulic overload pipe;
Balancing cylinder seals;
Air pressure gauges;
Front and side safety guards with safety keys;
Refurbished work surface on CNC machine;
Pedal assembly;
Remote-assisted electrical panel.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 65 T |
| Table length | 820 mm |
| Table width | 580 mm |
| Nbr of strokes/min | 73 |
| ------------------- | |
| worked hours | 5 hours |
| hours under power | 5 hours |
| state | rebuilt |
| At local norms | yes |
| status | visible but unplugged |
| Datasheet | Pressix T65 CNR4 |
| Last availability date | 03/02/2026 |
This listing features a PRESSIX mechanical eccentric press, model T65 CNR4 CE, with a force capacity of 65 tons. Manufactured in 2026, this machine is designed for precision metal forming and pressing operations. The press has a robust working table measuring 820 mm in length and 580 mm in width, suitable for various tooling setups. The slider dimensions are 470 x 340 mm, and the maximum height under the ram is 320 mm, allowing accommodation of diverse workpieces.
The machine operates at 400 V and 50 Hz, with a nominal power of 650 kN and an energy rating of 3,440 kJ. It offers an adjustable stroke range from 10 to 120 mm and a slider adjustment capacity of 100 mm. The press cycle cadence reaches up to 73 cycles per minute, with a rapid stop time of 0.154 seconds at the top dead center (P.M.S.). It also features hydraulic systems for overload protection and ram release to enhance operational safety and efficiency.
Control options include two-hand controls and pedal controls, providing flexibility in operation. The press is equipped with a hydraulic system to protect both the die and the machine from overload conditions. Safety features include front and side transparent protective guards with metal frames and safety keys, ensuring operator protection during use.
Visible components from the images show a clean, well-maintained machine with an orange crank and ram assembly, a metal working table with grooves and slots for tooling, and side panels that can be opened for maintenance access. The control panel, located on the right side, includes buttons and indicator lights, along with an emergency stop button and a green start button. Pneumatic components such as two large air tanks and pressure gauges are mounted at the rear, and the electrical panel is installed on the left side of the machine base.
The machine weighs approximately 5,000 kg and comes with a user and maintenance manual as well as a CE certificate of conformity. During its 2026 reconditioning, several key components were replaced with new parts, including motor and flywheel bearings, clutch components, hydraulic seals, air pressure gauges, safety guards, and the electrical panel was updated with remote assistance capabilities.
Overall, this PRESSIX T65 CNR4 CE eccentric press offers a combination of high pressing force, comprehensive safety features, and modern control systems suitable for demanding industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2018 |
| Offers online | 3 |
| Last activity | April 7, 2026 |
Ексцентрична преса PRESSIX T65 CNR4 CE
Výstředníkový lis PRESSIX T65 CNR4 CE
PRESSIX T65 CNR4 CE Excentrisk presse
PRESSIX T65 CNR4 CE Exzenterpresse
Εκκεντρικό πιεστήριο PRESSIX T65 CNR4 CE
PRESSIX T65 CNR4 CE Eccentric press
Prensa excéntrica PRESSIX T65 CNR4 CE
Presse excentrique PRESSIX T65 CNR4 CE
Ekscentrična preša PRESSIX T65 CNR4 CE
PRESSIX T65 CNR4 CE Excentrikus prés
Pressa eccentrica PRESSIX T65 CNR4 CE
Ekscentrinis presas PRESSIX T65 CNR4 CE
PRESSIX T65 CNR4 CE Excentrische pers
Prasa mimośrodowa PRESSIX T65 CNR4 CE
Imprensa excêntrica PRESSIX T65 CNR4 CE
Presă excentrică PRESSIX T65 CNR4 CE
PRESSIX T65 CNR4 CE Эксцентриковый пресс
Ekscentrična presa PRESSIX T65 CNR4 CE
PRESSIX T65 CNR4 CE Excentrisk press
Eksantrik pres PRESSIX T65 CNR4 CE
EN
- Languages
English (GB)