| Manufacturer | POREBA |
|---|---|
| Model | TOK-80 |
| Year | 2026 |
| Location | Poland
|
| Category | Lathes - CNC lathes |
| Turning length | 3000 mm |
| Turning Ø | 800 mm |
| Ø above the bed | 800 mm |
| Ø above transversing slide | 670 mm |
| Length between centers | 3000 mm |
| Type of CNC | Siemens Sinumerik 840D sL |
| Z-axis | 3000 mm |
| Max workpiece weight | 4500 kg |
| Spindle taper | A11 |
| Spindle bore | 95 mm |
| Number of turrets | 1 |
| Number of tools on turret | 12 |
| Number of rotating tools | 1 |
| Turning speed | 700 rpm |
| Tailstock | yes |
| Bar feeder | no |
| Length x width x height | 3000.0 × 2450.0 × 2950.0 |
| Weight | 22000 kg |
| worked hours | |
| hours under power | |
| state | like new |
| At local norms | --------- |
| status | packed |
| Last availability date | 14/09/2026 |
| Product id | P2606091304 |
| Language |
CNC струг POREBA TOK-80
CNC soustruh POREBA TOK-80
POREBA TOK-80 CNC-drejebænk
POREBA TOK-80 CNC-Drehmaschine
Τόρνος CNC POREBA TOK-80
POREBA TOK-80 CNC lathe
Torno CNC POREBA TOK-80
Tour CNC POREBA TOK-80
CNC tokarski stroj POREBA TOK-80
POREBA TOK-80 CNC esztergagép
Tornio CNC POREBA TOK-80
POREBA TOK-80 CNC tekinimo staklės
POREBA TOK-80 CNC-draaibank
Tokarka numeryczna ze skośnym łożem TOK-80 x3M CNC POREBA
Torno CNC POREBA TOK-80
Strung CNC POREBA TOK-80
POREBA TOK-80 Токарный станок с ЧПУ
CNC strug POREBA TOK-80
POREBA TOK-80 CNC-svarv
CNC torna POREBA TOK-80
|
The CNC lathe TOK-80 with an inclined bed is a machine designed for precise and efficient metal machining, suitable for both rough and finishing turning. This model is characterized by a large turning diameter – 800 mm over the bed and 670 mm over the carriage, allowing for machining of larger parts.
The machine dates from 1991, but underwent a comprehensive general overhaul in 2026, which covered both mechanics and electronics. During modernization, the machine tool geometry was restored, all bearings and ball screws were replaced, and the turret head along with the air system was refurbished.
The lathe is equipped with a modern Siemens Sinumerik 840D sl control system, which is completely new and under warranty. Additionally, new Siemens drives and a new electrical installation were installed, as well as a new control cabinet with Siemens and Eaton components. The hydraulic and lubrication systems have been modernized, and the chip conveyor has been refurbished, enhancing comfort and safety during operation.
The inclined bed provides high structural rigidity and effective chip removal during machining. The machine has been adapted to meet the current European Union safety requirements.
The TOK-80 is ready to start and work in production, offering solid parameters and modern control solutions that increase machining efficiency and precision.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TOK-80 CNC – CNC Lathe with Slant Bed After General Overhaul
The TOK-80 CNC lathe with a slant bed is designed for efficient rough and finish machining. The machine has undergone a comprehensive mechanical and electrical overhaul and is equipped with modern Siemens Sinumerik 840D sl control.
Key advantages:
• General overhaul performed with restoration of machine geometry
• All bearings and ball screws replaced
• Regenerated turret head + air
• New Siemens drives and new electrical installation
• New control cabinet based on Siemens and Eaton components
• Modernized hydraulic and lubrication systems
• Overhauled chip conveyor
• Slant bed providing high rigidity and effective chip removal
• Adaptation to current EU safety requirements
The machine has passed functional tests and is ready for start-up and production work.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2015 |
| Offers online | 7 |
| Last activity | Sept. 10, 2026 |
TOK-80 CNC – CNC Lathe with Slant Bed After General Overhaul
The TOK-80 CNC lathe with a slant bed is designed for efficient rough and finish machining. The machine has undergone a comprehensive mechanical and electrical overhaul and is equipped with modern Siemens Sinumerik 840D sl control.
Key advantages:
• General overhaul performed with restoration of machine geometry
• All bearings and ball screws replaced
• Regenerated turret head + air
• New Siemens drives and new electrical installation
• New control cabinet based on Siemens and Eaton components
• Modernized hydraulic and lubrication systems
• Overhauled chip conveyor
• Slant bed providing high rigidity and effective chip removal
• Adaptation to current EU safety requirements
The machine has passed functional tests and is ready for start-up and production work.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Lathes - CNC lathes |
| Turning length | 3000 mm |
| Turning Ø | 800 mm |
| Ø above the bed | 800 mm |
| Ø above transversing slide | 670 mm |
| Length between centers | 3000 mm |
| Type of CNC | Siemens Sinumerik 840D sL |
| Z-axis | 3000 mm |
| Max workpiece weight | 4500 kg |
| Spindle taper | A11 |
| Spindle bore | 95 mm |
| Number of turrets | 1 |
| Number of tools on turret | 12 |
| Number of rotating tools | 1 |
| Turning speed | 700 rpm |
| Tailstock | yes |
| Bar feeder | no |
| Length x width x height | 3000.0 × 2450.0 × 2950.0 |
| Weight | 22000 kg |
| worked hours | |
| hours under power | |
| state | like new |
| At local norms | --------- |
| status | packed |
| Last availability date | 14/09/2026 |
| Product id | P2606091304 |
| Language |
CNC струг POREBA TOK-80
CNC soustruh POREBA TOK-80
POREBA TOK-80 CNC-drejebænk
POREBA TOK-80 CNC-Drehmaschine
Τόρνος CNC POREBA TOK-80
POREBA TOK-80 CNC lathe
Torno CNC POREBA TOK-80
Tour CNC POREBA TOK-80
CNC tokarski stroj POREBA TOK-80
POREBA TOK-80 CNC esztergagép
Tornio CNC POREBA TOK-80
POREBA TOK-80 CNC tekinimo staklės
POREBA TOK-80 CNC-draaibank
Tokarka numeryczna ze skośnym łożem TOK-80 x3M CNC POREBA
Torno CNC POREBA TOK-80
Strung CNC POREBA TOK-80
POREBA TOK-80 Токарный станок с ЧПУ
CNC strug POREBA TOK-80
POREBA TOK-80 CNC-svarv
CNC torna POREBA TOK-80
|
The CNC lathe TOK-80 with an inclined bed is a machine designed for precise and efficient metal machining, suitable for both rough and finishing turning. This model is characterized by a large turning diameter – 800 mm over the bed and 670 mm over the carriage, allowing for machining of larger parts.
The machine dates from 1991, but underwent a comprehensive general overhaul in 2026, which covered both mechanics and electronics. During modernization, the machine tool geometry was restored, all bearings and ball screws were replaced, and the turret head along with the air system was refurbished.
The lathe is equipped with a modern Siemens Sinumerik 840D sl control system, which is completely new and under warranty. Additionally, new Siemens drives and a new electrical installation were installed, as well as a new control cabinet with Siemens and Eaton components. The hydraulic and lubrication systems have been modernized, and the chip conveyor has been refurbished, enhancing comfort and safety during operation.
The inclined bed provides high structural rigidity and effective chip removal during machining. The machine has been adapted to meet the current European Union safety requirements.
The TOK-80 is ready to start and work in production, offering solid parameters and modern control solutions that increase machining efficiency and precision.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2015 |
| Offers online | 7 |
| Last activity | Sept. 10, 2026 |
EN
- Languages
English (GB)