Ponar Żywiec UT-090 H Injection moulding machine Verified seller Good value

The PONAR ŻYWIEC UT-090 H plastic injection molding machine, built in Poland in 2001, processes thermoplastics by injection molding. Inside the extremely reliable machine, there are 615 x 615 mm plates on which injection molds with a minimum height of 225 mm are mounted. After supplying plastic with appropriate plasticity to the injection mold, it is closed with a force of 90 tons by a hydraulic closing unit protected by fixed and movable shields.

The UT 090 H horizontal injection molding machine is numerically controlled by the operator's panel located on the body with the MOOG-BUHL CNC controller installed, allowing for complete automation of the injection process and parameter control. Along with the injection molding machine, a wide range of equipment is offered, consisting of e.g. pneumatic material feeder, six anti-vibration pads and two hydraulic filters. The total weight of the machine is 5050 kg.

Characteristics of the PONAR ŻYWIEC UT-090 H injection molding machine

- mold clamping force: 90 t (900 kN)
- minimum injection mold height: 225 mm
- maximum injection mold opening stroke: 500 mm
- size of plates for fixing the mold (L x W): 615 x 615 mm
- maximum distance between plates for fixing the form: 725 mm
- distance between columns: 420 x 420 mm
- screw diameter: 30 mm
- worm pitch: 150 mm
- screw rotational speed range: 10-380 rpm
- maximum screw torque: 410 Nm
- injection volume: 106 cm3
- maximum injection capacity: 78 cm3/s
- maximum injection pressure: 217.7 MPa
- hydraulic ejector force: 33 kN
- hydraulic ejector stroke: 125 mm
- injection nozzle stroke: 250 mm
- pressure force of the injection nozzle: 57 kN
- number of heating zones: 3 + nozzle
- heating power: 6.1 kW
- engine power: 18.5 kW
- hydraulic system pressure: 17.5 MPa
- power supply: 3x 380 V 50 Hz
- dimensions (length x width x height): 4500 x 1400 x 2000 mm
- weight of the UT-090 H machine: 5050 kg

PONAR ŻYWIEC UT-090 H injection molding machine equipment

- CNC control: MOOG-BUHL
- pneumatic material feeder
- anti-vibration pads (6 pcs.)
- hydraulic filters (2 pcs.)
- core valves (2 pcs.)
- copies of programs on floppy disks (2 pcs.)
- nest
- nozzle
- clutch insert
- DTR - technical and operational documentation