Sorry, this offer is no longer available on Exapro

Polar Mohr 137 XT Paper guillotine

Here is a selection of similar machines

POLAR 137 XT cutter from 2008, 137 cm cut (installed in 05/2009)
Programmable premium model for all cutting jobs
Formats with a diagonal greater than 115 cm can be turned on the front table Automatic, hydraulic Automatic programming (largely automated workflow) 15” TDT color touch screen with integrated buttons
Unlimited memory location
Graphical display of the program sequence
Specific parameters of the programmable command with each cutting dimension (pressure, pre-pressure time, speed of the square) adjustment of the longit./cross. margin, correction of the poses, compensation of distortions, etc… Ethernet interface to connect under network ( P-Net) blade change from the front OptiKnife,
with blade elevator advance of the square: 20-30 cm/sec.
Blade speed: 45 cycles/min.
Blowing table, large blowing side clearance tables (70X100)
20-channel light barrier Rear protective housing with slot
Two-channel hydraulic system
Entry height (without pressure plate): 165 mm
Insertion depth: 145 cm
Front table depth: 73 cm
Table height: 90cm
Adjustable pressure from 150 to 5500 daN
Size: 288x282x171cm
Weight: 4.150 kg – 6.6 kVA
Equipped with: LEFT TRANSOMAT TR-130EL-4 from 2006
POLAR RA-4 jogger from 2000 with blowing table (90x115cm)
Lift LW-1000-4 from 1998

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Opening in cm 115
Max. paper width 115 cm
Air table Yes
Side table left Yes
Side table right Yes
-------------------
Length x width x height 2880.0 × 2820.0 × 1710.0
Weight 4150 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2020
Offers online 17
Last activity March 28, 2024

Description

POLAR 137 XT cutter from 2008, 137 cm cut (installed in 05/2009)
Programmable premium model for all cutting jobs
Formats with a diagonal greater than 115 cm can be turned on the front table Automatic, hydraulic Automatic programming (largely automated workflow) 15” TDT color touch screen with integrated buttons
Unlimited memory location
Graphical display of the program sequence
Specific parameters of the programmable command with each cutting dimension (pressure, pre-pressure time, speed of the square) adjustment of the longit./cross. margin, correction of the poses, compensation of distortions, etc… Ethernet interface to connect under network ( P-Net) blade change from the front OptiKnife,
with blade elevator advance of the square: 20-30 cm/sec.
Blade speed: 45 cycles/min.
Blowing table, large blowing side clearance tables (70X100)
20-channel light barrier Rear protective housing with slot
Two-channel hydraulic system
Entry height (without pressure plate): 165 mm
Insertion depth: 145 cm
Front table depth: 73 cm
Table height: 90cm
Adjustable pressure from 150 to 5500 daN
Size: 288x282x171cm
Weight: 4.150 kg – 6.6 kVA
Equipped with: LEFT TRANSOMAT TR-130EL-4 from 2006
POLAR RA-4 jogger from 2000 with blowing table (90x115cm)
Lift LW-1000-4 from 1998

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Opening in cm 115
Max. paper width 115 cm
Air table Yes
Side table left Yes
Side table right Yes
-------------------
Length x width x height 2880.0 × 2820.0 × 1710.0
Weight 4150 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 17
Last activity March 28, 2024