Plieno Spektras Gj 3 Lane Vegetable and fruit cutting, washing and blanching machine

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type User – small or medium company
Active since 2016
Offers online 1
Last activity Feb. 15, 2020


Output ( or cut/h ) 600 kg/h
Length x width x height 4227.0 × 1403.0 × 1438.0
Worked hours
Hours under power
State good
At local norms ---------


Machine for cutting and cropped or long or vegetables like carrots zucchini.
Capacity 500/700 Kg / hour based on vegetables and operators.
Çi full description below:

This machine is fed manualy or by means of transport feedinging belt. The operators have to take the carrots/vegetables from the feeding belt and place them with the top against a guide plate on the outside belt with flights.
1. An adjustable from 10 – 30 mm, guide plate positions automaticaly all the carrots/vegetables exact in front of the topping knife. So each vegetable is cutted by the topping knife at the same length.
2. After topping a 2nd knife section cuts the topped vegetable into pieces.
3. The length of the pieces is around 50 mm.
4. The machine has a central electrical panel with all functions. Start/stop, emergency stop and speed regulation of the belts.
5. The feeding belt can stopp independly from the cutting belts.
6. In case of only topping the operator can lift up mechanically the pieces cutting section. The machine now only cuts of the neck of the vegetable.
7. At the end of the middle belt the waste vegetables can be collected in a box.
8. The necks fall down sidewards of the machine also in small.
9. Machine is complete stainless steel, execpt belt, knifes, electro motors and bearings.

Machine complete in accordance with the safety rules CE mark., incl user maintenance and spareparts book in english version.

Technical details.
Length belt : 4.000 mm total length
Intake part: : 700 mm
Positioning part : 3.500 mm
Cutting section : 1.000 mm
Width feeding belt : 500 mm
Width positioning belt : 300 mm
Belt specification : synthetic belt, PVC, Food Grade, blue, flights
Flight : Flights with openings for cut, step ca. 50 mm
Material frame: Stainless Steel AISI 304, glass blasted.
Electromotors, electr components, bearings etc. of first quality and local available.
Drive : Electrical motor
Cutting knifes : axes with knifes driven elec. motor, with adjustable neck length. The cutting shaft for pieces can lift up manuel.
Control Box :The control box is taking all nececarry electrical and electronical components.

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines


Contact the seller