Manufacturer Pioneer
Model PIONEER М1+330
Year 2014
Location Russia RU
Category Paper and board machines - Winders / rewinders / unwinders / slitters
Product id P70202005

Price on request

Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2017
Offers online 4
Last activity May 28, 2019


Worked hours
Hours under power
State like new
At local norms ---------


Fully servo driven rewinder cutting machine with the functions of automatic control and accounts intended for the control, cutting and culling of large rolls of printed self-adhesive labels on small rolls.
Basic equipment
• Touch rewind control display
• Large touch control screen quality control system
• servo main drive and winding devices
• web guiding device on a side edge of the E + L -2scht.
• Tables for gluing fabric c pnevmozazhimami
• Clamping shaft NIP
• Automatic control of web tension
• Electronic Meter / labels
• The device scissor slitting
• Shaft unwinding pnevmorazzhimnoy bushing diameter 3 "(76 mm);
• winding shaft bushing pnevmorazzhimnoy diameter of 3 "(76 mm) with its own servo and removably on another shaft diameter
• print image of the automatic control system
• winding shaft divert waste over the table gluing

roll diameter unwind, max .:
rewind roll diameter, max (in one winding shaft)
rewind roll diameter, max (with two winding shaft)
the maximum width of the material:
cutting width, m:
lateral register during slitting
electrical connection:
compressed air, min:
speed manual Max.
Dimensions (LxWxH) approx:
weight, about

700 mm
 700 mm
 400 mm
330 mm
 15 mm
+/- 8 mm
380V, 3 phase, 50 Hz,
6 bar
     300 m / min
260h100h140 cm
1800 kg

automatic 100% inspection system Nikka Alis M1 +

Alis M1 + uses video technology to replace devices such as strobe, various counters, sensors (missing labels, tags, gluing, etc.). Alis M1 + performs all these functions and thus stops the rewinding of web positioning defect on the bonding table.
The touch screen displays a defect point. Winding divert waste is carried out on a special shaft, located above the table gluing. The system is designed to work with paper, transparent film-term and reflective materials, etc.
The system consists of a small camera unit and a touch screen for video control and management functions. Simple graphical management interface, similar to the smartphone control allows the operator to view live video images of the moving web. Special light source allows to see the natural color of the product, including reflective and holographic materials. The whole setup is automated, and most management tasks included the press of a "button".
Real Picture Picture sealed fabric that simulates a conventional Videocon-Troll with stroboscope. The operator can see the print defects and abnormalities.
Score Correct Score label paper or transparent film labels. Slow down and stop the rewind at the specified number of labels (or the length of the roll).
The labels in each stream are considered separately.
Missing label and others. Video detection missing labels, Splice, places of Nesna-fin, with the number of streams (channels) to 20. etiketkok also works for non-regular shape, clear labels and labels with a small area of ​​sealing.
Basic quality control pechati.Obnaruzhivaet missing colors, a significant change in color, large spots and stripes on the print. The operator can adjust the sensitivity Flow rate quality control.
The test functions are automated and do not require constant operator attention, leaving him time for other work

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Contact the seller