Vertical lathe EMAG VSC 500 C-axis driven tools
Control: Siemens 840D

Workspace
max. chuck diameter 500 mm
Swing diameter 520 mm
X-axis travel 1000 mm
Z-axis travel 400 mm

main spindle
max. speed 3400 rpm
Spindle bearing 160 mm
Main drive
Maximum power 71 KW
full power from 900 rpm
maximum torque 750 Nm
Holding torque for continuous operation 480 Nm

feed drive
Rapid traverse X-axis 45 m/min
Rapid traverse Z axis 30 m/min
Feed force in X + Z 11 KN
Disc turret

12 DIN 69880 mounts, 12 of which are powered
Shaft diameter 50 mm

Electrical equipment
400 / 24 / 230 volts - 50 Hz

Connected load 55 KW

Dimensions + weight
L x W x H 3.95 x 1.57 x 3.2 m
Weight 13500 kg

EQUIPMENT and ACCESSORIES
12-fold live tool revolver 12x50 SW440, max. speed 6000 rpm, max torque
60 Nm
direct position measuring systems in X + Z
C axis interpolation with X and Z axis, speed 0-100 rpm,
Positioning accuracy 0.01 degrees

Open automation standard D=440 mm with workpiece diameter 500mm, height 200 mm
Chip conveyor hinged belt with brush discharge to the rear, discharge height 1250 mm
Coolant system standard 80 liters at 8 bar / content 450 liters
Suction mechanical filter air volume 1000 cbm/hr
Chuck diameter 500 mm
Tools according to DIN 69880
Prepared for workpiece measurement
Tools used approx. 55 pieces of fixed + driven tools

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Plate diameter 554 mm
CNC type Fanuc
Rotation speed 1800 rpm
Motor power 11 kW
Overhauled no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2008
Offers online 20
Last activity March 28, 2024

Description

Vertical lathe EMAG VSC 500 C-axis driven tools
Control: Siemens 840D

Workspace
max. chuck diameter 500 mm
Swing diameter 520 mm
X-axis travel 1000 mm
Z-axis travel 400 mm

main spindle
max. speed 3400 rpm
Spindle bearing 160 mm
Main drive
Maximum power 71 KW
full power from 900 rpm
maximum torque 750 Nm
Holding torque for continuous operation 480 Nm

feed drive
Rapid traverse X-axis 45 m/min
Rapid traverse Z axis 30 m/min
Feed force in X + Z 11 KN
Disc turret

12 DIN 69880 mounts, 12 of which are powered
Shaft diameter 50 mm

Electrical equipment
400 / 24 / 230 volts - 50 Hz

Connected load 55 KW

Dimensions + weight
L x W x H 3.95 x 1.57 x 3.2 m
Weight 13500 kg

EQUIPMENT and ACCESSORIES
12-fold live tool revolver 12x50 SW440, max. speed 6000 rpm, max torque
60 Nm
direct position measuring systems in X + Z
C axis interpolation with X and Z axis, speed 0-100 rpm,
Positioning accuracy 0.01 degrees

Open automation standard D=440 mm with workpiece diameter 500mm, height 200 mm
Chip conveyor hinged belt with brush discharge to the rear, discharge height 1250 mm
Coolant system standard 80 liters at 8 bar / content 450 liters
Suction mechanical filter air volume 1000 cbm/hr
Chuck diameter 500 mm
Tools according to DIN 69880
Prepared for workpiece measurement
Tools used approx. 55 pieces of fixed + driven tools

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Plate diameter 554 mm
CNC type Fanuc
Rotation speed 1800 rpm
Motor power 11 kW
Overhauled no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2008
Offers online 20
Last activity March 28, 2024

Here is a selection of similar machines

EMAG VSC 500 vertical turret lathe with cnc