|Operating t°||123 °C|
|Nbr of baskets|
|Length x width x height||- × - × -|
|Hours under power|
|At local norms||---------|
Machine can be seen in working condition
machine is in very good condition
Working pressure 1,7 bar
Working temperature 123 ° C
Chamber dimension : 1100 mm X 1700 mm X 3000 mm
Real Full-Time Use: 2 years
Dimensions of Autoclave: 3755 mm ( + 50 mm) (width) x 3430 mm ( +- 50 mm) (length) x 3300 mm
( +- 50 mm) (height)
(In the installation area, 1 meter clearence should be left for maintenance on the autoclave.)
Dimensions of Loading Entrance: 1070 mm (width) x 1725 mm (height)
Gross Volume of Loading Area: 8662 litre
Trolley Quantity: 3 pieces
Quantity of Tray in the One Trolley: 12 pieces
Total Quantity of Tray: 36 pieces
Material Quality of Tray: 316 L quality stainless steel
Tray Dimensions: 950 mm x 950 mm 90 mm (height) x 16 mm ( Wall thickness)
Design Standard: ASME section VIII div 1 standard & pressure protection class standar 97/23/EC
Type of Certificate: CE
Working Pressure: 2,2 kg/ cm³
Design Pressure: 3 kg/cm²
Working Temperature: 105 - 124°C
Hydraulic Test Pressure: 4,5 kg/cm²
Material Characteristics of Internal Loading Area: 316 L stainless steel 8 mm Wall thickness, =<0,8 Ra, mat surface burnishing
Insulating Material: Stone wool
Insulating Thickness: 175 mm
Insulating Coating Material: 304 quality stainless steel 1,2 mm Wall thickness
Coating Flange Material: Riveted
Door Insulating Material: Stone Wool
Door Insulating Thickness: 200 mm
Door Insulating Coating Material: 304 quality stainless steel, 16 mm Wall thickness
Characteristics of Door and Door Track Fastenings: The door with pneumatic cylinder and horizontal centring, fittings 316 L stainless steel, the other pieces standard steel =< 0,8 Ra, mat surface burnishing.
Type of Leaktightness: Double mechanics stuffing with cooling
Heat Exchangers: Type of finned pipe 316 L quality stainless steel.
Characteristic of Autoclave Structure: Conforming to GMP Standards.
Mountability: The advantage of mounting flat surface without any groove.
Control Type: Backing control for manuel and PLC connection. As manuel and automatic , trouble shooting for PLC.
Responsible of PLC Validation: Manufacture firm as Pharmalab.
General Characteristics of Control System: Real-time control with Siemens brand PLC, 10 pieces prescription memory, getting soft&hard copy from PLC program, colorful touch screen.
Power Demands: Pure and dry saturated vapor on 3 bar G pressure and 1650 kg/hour flow. Diameter of steam supply line is 3”
380 V, 50 Hz, Three-phase + nötr + earthing 4 x 2,5 mm copper cable, 3 kg/cm² pressure, ~200 lt/dk dry air, connection diameter ½”
Process Air Requirement: 6 kg/cm² pressure, ~450 lt/dk dry air connection diameter 3” Drain connection diameter 3” nippel sleeved.
Operating Pressure: 1,7 bar; working temperature: 123°C, boiler dimensions: 1100 mm x 1700 mm x 3000 mm
Door lamps, emergency stop button, compression meter with special alloy.
Full equipped security, PID control.
Autoclave’s all equipments are original.
There are all hard&soft copy technical documents concerning to autoclave.
Please note that this description may have been translated automatically. Contact us for further information.