Max. Cutting length 2.100 mm
Milling travel / milling width cross max. 300 mm
Module in steel / cast iron, max. 16 / 18
Table clamping size 510 x 2.400 resp. 275 x 2.120 mm
Mounting height under cutter, depending on cutter Ø 150 - 430 mm
Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm
Cutter width max. without/with counter bearing support 50 / 140 mm
Cutter mandrel Ø max. 50 mm
Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 °
Milling spindle speeds steplessly adjustable 40 - 120 rpm
Milling slide swivelling right / left for Helix Cuts 30 °
Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min
Quick return of WP-table 10.000 mm/min
Milling spindle drive 5,5 kW
Total electrical load 10 kW - 400 V - 50 Hz
Weight 5.000 kg

Accessories / Special Features:
* SIEMENS-CNC-Control model M 810 for the Indexing axis ( X ) so there is no need for any change gears anymore, indexing steps from 0,001 – 2.100 mm adjustable, also different index - steps programmable on the same workpiece.
* Manual adjustment of all hydraulic federates and quickfeeds, also 2-cut device available for roughing and finishing process, all slidetravels are limited by switches
* 2-parts hydraulic workpiece clamping device in total 2.000 length x 160 mm width,
* Heavy duty milling head with electronic drive for steplessly adjustable milling speeds.
* Separate standing switch and cabinet, separate hydraulic unit, separate coolant device with swarfconveyor and swarfconveyor built-in the table
* Central lubrication, etc.
The CNC-Control can be easily retrofitted with a new SIEMENS 840 D if required.

This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head) and sawblades.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max wheel Ø 125 mm
Module + 18
Module - 16
CNC Yes
Type of CNC SIEMENS M 840 D
Max. spindle speed 120 rpm
Motor power 5.5 kW
-------------------
Weight 5000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Description

Max. Cutting length 2.100 mm
Milling travel / milling width cross max. 300 mm
Module in steel / cast iron, max. 16 / 18
Table clamping size 510 x 2.400 resp. 275 x 2.120 mm
Mounting height under cutter, depending on cutter Ø 150 - 430 mm
Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm
Cutter width max. without/with counter bearing support 50 / 140 mm
Cutter mandrel Ø max. 50 mm
Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 °
Milling spindle speeds steplessly adjustable 40 - 120 rpm
Milling slide swivelling right / left for Helix Cuts 30 °
Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min
Quick return of WP-table 10.000 mm/min
Milling spindle drive 5,5 kW
Total electrical load 10 kW - 400 V - 50 Hz
Weight 5.000 kg

Accessories / Special Features:
* SIEMENS-CNC-Control model M 810 for the Indexing axis ( X ) so there is no need for any change gears anymore, indexing steps from 0,001 – 2.100 mm adjustable, also different index - steps programmable on the same workpiece.
* Manual adjustment of all hydraulic federates and quickfeeds, also 2-cut device available for roughing and finishing process, all slidetravels are limited by switches
* 2-parts hydraulic workpiece clamping device in total 2.000 length x 160 mm width,
* Heavy duty milling head with electronic drive for steplessly adjustable milling speeds.
* Separate standing switch and cabinet, separate hydraulic unit, separate coolant device with swarfconveyor and swarfconveyor built-in the table
* Central lubrication, etc.
The CNC-Control can be easily retrofitted with a new SIEMENS 840 D if required.

This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head) and sawblades.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max wheel Ø 125 mm
Module + 18
Module - 16
CNC Yes
Type of CNC SIEMENS M 840 D
Max. spindle speed 120 rpm
Motor power 5.5 kW
-------------------
Weight 5000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Here is a selection of similar machines

Donau - Knapp UZFM V 300 H - CNC Gear milling machine