Price on request
Make an offer| Capacity | T |
| Ram stroke | mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 3200.0 × 2100.0 × 5850.0 |
| Weight | 4000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Pensotti 4 tons |
| Last availability date | 02/04/2026 |
This Pensotti forging hammer is designed for industrial forging applications with a capacity of 4 tons. It delivers a blow energy of 12,000 mkg, providing effective power for heavy forging tasks. The machine has a total weight of approximately 4,000 kg for the hammer alone plus shaft (excluding the mold), with the club and shaft combined with mass and mold weighing around 5,250 kg.
The forging hammer's overall dimensions are 3,200 mm in length, 2,100 mm in width, and 5,850 mm in height. The support base measures 3,200 x 1,800 mm. The machine includes a piston rod with a diameter of 190 mm and a total rod length of 2,900 mm. It requires a free space of 2,600 mm above the cylinder for operation.
Maximum mold dimensions supported are 720 x 900 mm, with the maximum weight of the upper mold being 1,250 kg. The minimum total height of the two molds is 450 mm, and the mold holder's plan dimensions are 770 x 900 mm.
The hammer's ram, sow block, two head parts, one set of columns, and piston rod are available as spares. The machine is currently dismantled and stored in good condition.
Additional technical details include normal intake air consumption of 20 m³/min, an intake air compressor flow rate of 1,500 m²/h, and a tank capacity of 36 m³.
Visual inspection shows the machine body with signs of wear and dirt accumulation, consistent with industrial use. A piston or ram component is visible in the center of the hammer, along with an overhead pipe and mechanical arm attached to the machine. The machine components are placed on wooden pallets and show some surface rust and dirt, indicative of storage conditions.
This Pensotti forging hammer is suitable for heavy-duty forging operations and comes with major components and spare parts to support maintenance and repairs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 4 tons,
Blow energy : 12000 mkg,
Weight of the mallest alone plus shaft (excl. mould) : 4000 kg,
Weight of the club with shaft plus mass, mold : 5250 kg,
Effective power of maximum blow : 12000 Kgmt.
Total weight : 1130 GI,
Overall dimensions:
in front of : 3200 mm,
next to : 2100 mm,
in height : 5850 mm,
Mazza :
Weight : 3300 Kg,
Dimensions at the base right : 850 x 800 mm,
Race : 1300 mm,
Maximum mold dimensions : 720 x 900 mm,
Maximum weight of the upper mold : 1250 Kg,
Minimum total height of the two molds : 450 mm,
Plan dimensions of the hxi mold holder : 770 x 900 mm,
Rod diameter : 190 mm,
Total length of the rod : 2900 mm,
Free space required above the cylinder : 2600 mm,
Dimensions of the support base : 3200 x 1800 mm,
Weight : 800 Q II,
Normal intake air consumption : 20 m3/min
Flow rate of the intake air compressor : 1500 m2/h,
Tank Capacity : 36 m3.
All major components are available, plus spares such as
- sow block
- ram
- 2 head parts
- 1 set of columns
- 1 piston rod
Drawing available
Item Condition: Good condition, dismantled and stored
Capacity Tons: 4
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 21, 2026 |
Forging Equipment
Capacity : 4 tons,
Blow energy : 12000 mkg,
Weight of the mallest alone plus shaft (excl. mould) : 4000 kg,
Weight of the club with shaft plus mass, mold : 5250 kg,
Effective power of maximum blow : 12000 Kgmt.
Total weight : 1130 GI,
Overall dimensions:
in front of : 3200 mm,
next to : 2100 mm,
in height : 5850 mm,
Mazza :
Weight : 3300 Kg,
Dimensions at the base right : 850 x 800 mm,
Race : 1300 mm,
Maximum mold dimensions : 720 x 900 mm,
Maximum weight of the upper mold : 1250 Kg,
Minimum total height of the two molds : 450 mm,
Plan dimensions of the hxi mold holder : 770 x 900 mm,
Rod diameter : 190 mm,
Total length of the rod : 2900 mm,
Free space required above the cylinder : 2600 mm,
Dimensions of the support base : 3200 x 1800 mm,
Weight : 800 Q II,
Normal intake air consumption : 20 m3/min
Flow rate of the intake air compressor : 1500 m2/h,
Tank Capacity : 36 m3.
All major components are available, plus spares such as
- sow block
- ram
- 2 head parts
- 1 set of columns
- 1 piston rod
Drawing available
Item Condition: Good condition, dismantled and stored
Capacity Tons: 4
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | T |
| Ram stroke | mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 3200.0 × 2100.0 × 5850.0 |
| Weight | 4000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Pensotti 4 tons |
| Last availability date | 02/04/2026 |
This Pensotti forging hammer is designed for industrial forging applications with a capacity of 4 tons. It delivers a blow energy of 12,000 mkg, providing effective power for heavy forging tasks. The machine has a total weight of approximately 4,000 kg for the hammer alone plus shaft (excluding the mold), with the club and shaft combined with mass and mold weighing around 5,250 kg.
The forging hammer's overall dimensions are 3,200 mm in length, 2,100 mm in width, and 5,850 mm in height. The support base measures 3,200 x 1,800 mm. The machine includes a piston rod with a diameter of 190 mm and a total rod length of 2,900 mm. It requires a free space of 2,600 mm above the cylinder for operation.
Maximum mold dimensions supported are 720 x 900 mm, with the maximum weight of the upper mold being 1,250 kg. The minimum total height of the two molds is 450 mm, and the mold holder's plan dimensions are 770 x 900 mm.
The hammer's ram, sow block, two head parts, one set of columns, and piston rod are available as spares. The machine is currently dismantled and stored in good condition.
Additional technical details include normal intake air consumption of 20 m³/min, an intake air compressor flow rate of 1,500 m²/h, and a tank capacity of 36 m³.
Visual inspection shows the machine body with signs of wear and dirt accumulation, consistent with industrial use. A piston or ram component is visible in the center of the hammer, along with an overhead pipe and mechanical arm attached to the machine. The machine components are placed on wooden pallets and show some surface rust and dirt, indicative of storage conditions.
This Pensotti forging hammer is suitable for heavy-duty forging operations and comes with major components and spare parts to support maintenance and repairs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 21, 2026 |
Ковашки чук Pensotti 4 tons
Kovací buchar Pensotti 4 tons
Pensotti 4 tons Smedehammer
Pensotti 4 tons Schmiedehammer
Σφυρί σφυρηλάτησης Pensotti 4 tons
Pensotti 4 tons Forging hammer
Martillo pilón Pensotti 4 tons
Marteau-pilon Pensotti 4 tons
Kovački čekić Pensotti 4 tons
Pensotti 4 tons Kovácskalapács
Maglio Pensotti 4 tons
Pensotti 4 tons Kalimo kūjis
Pensotti 4 tons Smeedhamer
Młot kuźniczy Pensotti 4 tons
Martelo de forja Pensotti 4 tons
Ciocan de forjare Pensotti 4 tons
Pensotti 4 tons Кузнечный молот
Kovački čekić Pensotti 4 tons
Pensotti 4 tons Smideshammare
Dövme şahmerdanı Pensotti 4 tons
EN
- Languages
English (GB)