Sorry, this offer is no longer available on Exapro

Paul C11_MKL Used cross-cut optimizing saw

Here is a selection of similar machines

Automatic crosscut for cutting preset fixed lengths and eliminating defects marked by chalk lines
Flow: right to left
Maximum infeed length: 5000mm
Thickness of wood: 12 - 90 mm
Width of the wood: 30 - 180 mm
Max wood section: 180x45 mm / 130x75 mm / 90x90 mm
Min. Wood section: 12x30 mm
Min. Cutting length: 230 mm
Max feed speed: 200 m / min
Cutting motor: 5.5 kW
Diameter of the blade: 500 mm.
Equipment:
Marking station
humidity measurement
measuring station
Crosscut saw
Control panel
Sorting station with 2 pneumatic ejectors
3 stackers lengths 350 mm - 1100 mm
1 stacker lengths 480 mm - 2100 mm
camera surveillance above the stackers
MAXI 6 CNC control powered by LINUX

total length line with safety fences: 33m
2144 m³ of treated wood
707906 cuts

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Cutting height 90 mm
Cutting length 5000 mm
Cutting width 180 mm
Blade diameter 500 mm
Engine power 5.5 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Paul C11_MKL
Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024

Description

Automatic crosscut for cutting preset fixed lengths and eliminating defects marked by chalk lines
Flow: right to left
Maximum infeed length: 5000mm
Thickness of wood: 12 - 90 mm
Width of the wood: 30 - 180 mm
Max wood section: 180x45 mm / 130x75 mm / 90x90 mm
Min. Wood section: 12x30 mm
Min. Cutting length: 230 mm
Max feed speed: 200 m / min
Cutting motor: 5.5 kW
Diameter of the blade: 500 mm.
Equipment:
Marking station
humidity measurement
measuring station
Crosscut saw
Control panel
Sorting station with 2 pneumatic ejectors
3 stackers lengths 350 mm - 1100 mm
1 stacker lengths 480 mm - 2100 mm
camera surveillance above the stackers
MAXI 6 CNC control powered by LINUX

total length line with safety fences: 33m
2144 m³ of treated wood
707906 cuts

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Cutting height 90 mm
Cutting length 5000 mm
Cutting width 180 mm
Blade diameter 500 mm
Engine power 5.5 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024