CNC - traveling column milling machine
Make PARPAS
Type SHARK One
Control HEIDENHAIN iTNC 530 HSCI
Year of construction 2016

traverse
Longitudinal movement (X-axis) 3,500 mm
Transverse movement (Y axis) 1,050 mm
Vertical movement (Z-axis) 1,200 mm

worktable
Clamping area 4,000 x 1,000 mm
Threaded holes with a tight fit

feed
X, Y and Z axes, stepless 2 - 30,000 mm / min.
Rapid traverses in X / Y / Z 30 m / min
Max. Feed force of the axes 10,000 N

2-axis milling head
2-axis milling head TUB-E92 with drive via Torque motors for simultaneous 5-axis machining
Power at 100% ED 29 kW
Speed range, stepless 0-18,000 rpm
Max. Torque 92 Nm
Rotational speed Axis A / C 60 min-1
Tool holder HSK 63A - DIN 69893

Automatic tool changer ATC
Tool places 30 places
Tool diameter max. 90 mm
Tool length max. 320 mm
Tool weight max. 8 kg
Change positions vertically

Guides, drive and measuring systems
• All axis drives with digital drives make HEIDENHAIN
• Direct measuring systems for X-, Y- and Z-axis Fabr. HEIDENHAIN
• X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
• Precision ballscrews with preloaded nuts in the X, Y and Z axes
Coolant system with chip conveyor
• Coolant outlet, switchable from coolant to air, on the front side of the milling head via manually swiveling nozzles
• Internal coolant supply, switchable from coolant to air, through the spindle center.
Tank volume approx. 1,000 l
• Normal coolant supply 25 l / min 5 bar
• High pressure pump for internal cooling 20 l / min 50 bar
• Coolant tank incl. Cartridge filter and paper belt filter system
• Hinge belt chip conveyor, discharge height approx. 750 mm

Dimension, weight
Base area machine approx. 8.3 x 6.7 m
Total height about 3,60 m
Machine weight approx. 28,000 kg


Electrical connection values
Power consumption 120 A
Operating voltage 400 V
Operating frequency 50 Hz

Equipment / Accessories
• Machine bed, column and vertical saddle as welded steel construction, annealed with low tension
• Milling slider as welded steel construction
• Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors
• Oil cooling unit for cooling the milling head
• CNC thermal compensation
• Spindle drive 29 kW
• Spindle speed max. 18.000 min-1
• Axle drives by means of precision ball screws and digital servo motors
• Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles
• Milling head Measurement “Kinematics Opt”
• Laser tool presetter BLUM - NT version mounted on machine table
• CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
• Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
• swivelling control panel for machine operation in front of the machine
• Automatic tool changer with 30 magazine places, change position vertical
• Coolant system with external shower rim and IKZ through the spindle
• 1 chip conveyor in the working area, ejection right
• Pretensioned linear guides in all axes
• Precision ball screws in Y- and Z-axis
• X-axis drive via gear rack and master/slave drive
• Hydraulic weight compensation in the vertical axis
• Bellows cover of the X-axis
• Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed
• Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table.
Safety fencing for the back machine area with two secured access doors.


• enclosure climate
• Hydraulic system
• Work area lighting
• Extraction unit make REVEN
• Black and white paint
• Ca - operating hours: control 28,300 h, machine 27,300 h, program run 11,400 h

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X axis 3500 mm
Y axis 1083 mm
Z axis 1074 mm
Table length 4000 mm
Table width 1000 mm
Spindle taper HSK 63A
Max. spindle speed 18000 rpm
Spindle motor power 29 kW
Overhauled no
-------------------
Length x width x height 8300.0 × 6700.0 × 3600.0
Weight 28000 kg
Worked hours
Hours under power
State excellent
At local norms yes
Status visible
Client type Reseller
Active since 2018
Offers online 9
Last activity March 20, 2024

Description

CNC - traveling column milling machine
Make PARPAS
Type SHARK One
Control HEIDENHAIN iTNC 530 HSCI
Year of construction 2016

traverse
Longitudinal movement (X-axis) 3,500 mm
Transverse movement (Y axis) 1,050 mm
Vertical movement (Z-axis) 1,200 mm

worktable
Clamping area 4,000 x 1,000 mm
Threaded holes with a tight fit

feed
X, Y and Z axes, stepless 2 - 30,000 mm / min.
Rapid traverses in X / Y / Z 30 m / min
Max. Feed force of the axes 10,000 N

2-axis milling head
2-axis milling head TUB-E92 with drive via Torque motors for simultaneous 5-axis machining
Power at 100% ED 29 kW
Speed range, stepless 0-18,000 rpm
Max. Torque 92 Nm
Rotational speed Axis A / C 60 min-1
Tool holder HSK 63A - DIN 69893

Automatic tool changer ATC
Tool places 30 places
Tool diameter max. 90 mm
Tool length max. 320 mm
Tool weight max. 8 kg
Change positions vertically

Guides, drive and measuring systems
• All axis drives with digital drives make HEIDENHAIN
• Direct measuring systems for X-, Y- and Z-axis Fabr. HEIDENHAIN
• X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
• Precision ballscrews with preloaded nuts in the X, Y and Z axes
Coolant system with chip conveyor
• Coolant outlet, switchable from coolant to air, on the front side of the milling head via manually swiveling nozzles
• Internal coolant supply, switchable from coolant to air, through the spindle center.
Tank volume approx. 1,000 l
• Normal coolant supply 25 l / min 5 bar
• High pressure pump for internal cooling 20 l / min 50 bar
• Coolant tank incl. Cartridge filter and paper belt filter system
• Hinge belt chip conveyor, discharge height approx. 750 mm

Dimension, weight
Base area machine approx. 8.3 x 6.7 m
Total height about 3,60 m
Machine weight approx. 28,000 kg


Electrical connection values
Power consumption 120 A
Operating voltage 400 V
Operating frequency 50 Hz

Equipment / Accessories
• Machine bed, column and vertical saddle as welded steel construction, annealed with low tension
• Milling slider as welded steel construction
• Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors
• Oil cooling unit for cooling the milling head
• CNC thermal compensation
• Spindle drive 29 kW
• Spindle speed max. 18.000 min-1
• Axle drives by means of precision ball screws and digital servo motors
• Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles
• Milling head Measurement “Kinematics Opt”
• Laser tool presetter BLUM - NT version mounted on machine table
• CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
• Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
• swivelling control panel for machine operation in front of the machine
• Automatic tool changer with 30 magazine places, change position vertical
• Coolant system with external shower rim and IKZ through the spindle
• 1 chip conveyor in the working area, ejection right
• Pretensioned linear guides in all axes
• Precision ball screws in Y- and Z-axis
• X-axis drive via gear rack and master/slave drive
• Hydraulic weight compensation in the vertical axis
• Bellows cover of the X-axis
• Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed
• Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table.
Safety fencing for the back machine area with two secured access doors.


• enclosure climate
• Hydraulic system
• Work area lighting
• Extraction unit make REVEN
• Black and white paint
• Ca - operating hours: control 28,300 h, machine 27,300 h, program run 11,400 h

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X axis 3500 mm
Y axis 1083 mm
Z axis 1074 mm
Table length 4000 mm
Table width 1000 mm
Spindle taper HSK 63A
Max. spindle speed 18000 rpm
Spindle motor power 29 kW
Overhauled no
-------------------
Length x width x height 8300.0 × 6700.0 × 3600.0
Weight 28000 kg
Worked hours
Hours under power
State excellent
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2018
Offers online 9
Last activity March 20, 2024

Here is a selection of similar machines

Used Parpas SHARK One universal milling machine