Price on request
View price| CNC type | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 16/06/2026 |
The HONESS V250-3000 is a profile punching machine specifically designed for tubes and profiles, manufactured in 2002. It features a self-centering product clamp that grips the tube from the outside, ensuring secure and accurate positioning during the punching process. The machine is equipped with interchangeable clamping jaws, allowing it to accommodate various tube and profile types. The clamp position is adjustable for precise alignment to suit different workpieces.
This machine can handle workpieces with a maximum width of 100 mm and a maximum height of 80 mm for single-sided punching. For through holes, it supports a maximum product height of 60 mm. The maximum travel distance of the product clamps is 3,100 mm, and the minimum distance from the tube end to the first punchable hole is 30 mm.
The punching station consists of a single vertical punching cylinder capable of delivering a maximum punching force of 250 kN at a working pressure of 220 bar. It has a maximum vertical stroke of 80 mm. The machine's performance includes a clamp carriage travel speed of approximately 40 meters per minute, with positioning repeatability of ±0.1 mm. The maximum strokes per minute depend on the cylinder stroke setting and hole pitch.
The working range of the punching machine exceeds 3.10 meters, supported by a 3.00-meter-long support table.
The machine is a large industrial unit with a blue and white body, featuring protective panels and integrated control units, including a control panel with keyboard and monitor. It includes a long metal beam or track attached for material handling. The overall condition appears used but intact, with no visible major damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.Workpiece clamping:
Self-centering product clamp, gripping the tube from the outside
Interchangeable clamping jaws for different tube/profile types
Adjustable clamp position for accurate alignment
Workpiece dimensions:
Max product width (single-sided punching): 100 mm
Max product height (single-sided punching): 80 mm
Max product height for through holes: 60 mm
Max travel of product clamps: 3,100 mm
Minimum distance from tube end to first punchable hole: 30 mm
Punching capacity:
Max punching diameter (as delivered, through holes): Ø40 mm
Punching station: Single vertical punching cylinder
Max punching force: 250 kN at 220 bar working pressure
Max vertical stroke of punching cylinder: 80 mm
Performance:
Max strokes per minute: Dependent on cylinder stroke setting and hole pitch
Clamp carriage travel speed: approx. 40 m/min
Positioning repeatability: ±0.1 mm
Machine size and range:
Punching machine working range: > 3.10 m
Support table length: 3.00 m
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2035 |
| Last activity | June 17, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.Workpiece clamping:
Self-centering product clamp, gripping the tube from the outside
Interchangeable clamping jaws for different tube/profile types
Adjustable clamp position for accurate alignment
Workpiece dimensions:
Max product width (single-sided punching): 100 mm
Max product height (single-sided punching): 80 mm
Max product height for through holes: 60 mm
Max travel of product clamps: 3,100 mm
Minimum distance from tube end to first punchable hole: 30 mm
Punching capacity:
Max punching diameter (as delivered, through holes): Ø40 mm
Punching station: Single vertical punching cylinder
Max punching force: 250 kN at 220 bar working pressure
Max vertical stroke of punching cylinder: 80 mm
Performance:
Max strokes per minute: Dependent on cylinder stroke setting and hole pitch
Clamp carriage travel speed: approx. 40 m/min
Positioning repeatability: ±0.1 mm
Machine size and range:
Punching machine working range: > 3.10 m
Support table length: 3.00 m
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| CNC type | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 16/06/2026 |
The HONESS V250-3000 is a profile punching machine specifically designed for tubes and profiles, manufactured in 2002. It features a self-centering product clamp that grips the tube from the outside, ensuring secure and accurate positioning during the punching process. The machine is equipped with interchangeable clamping jaws, allowing it to accommodate various tube and profile types. The clamp position is adjustable for precise alignment to suit different workpieces.
This machine can handle workpieces with a maximum width of 100 mm and a maximum height of 80 mm for single-sided punching. For through holes, it supports a maximum product height of 60 mm. The maximum travel distance of the product clamps is 3,100 mm, and the minimum distance from the tube end to the first punchable hole is 30 mm.
The punching station consists of a single vertical punching cylinder capable of delivering a maximum punching force of 250 kN at a working pressure of 220 bar. It has a maximum vertical stroke of 80 mm. The machine's performance includes a clamp carriage travel speed of approximately 40 meters per minute, with positioning repeatability of ±0.1 mm. The maximum strokes per minute depend on the cylinder stroke setting and hole pitch.
The working range of the punching machine exceeds 3.10 meters, supported by a 3.00-meter-long support table.
The machine is a large industrial unit with a blue and white body, featuring protective panels and integrated control units, including a control panel with keyboard and monitor. It includes a long metal beam or track attached for material handling. The overall condition appears used but intact, with no visible major damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2035 |
| Last activity | June 17, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC машина за щанцоване Other HONESS V250-3000
Děrovací stroj CNC Other HONESS V250-3000
Other HONESS V250-3000 CNC stansemaskine
Other HONESS V250-3000 CNC Stanzmaschine
CNC μηχάνημα διάτρησης Other HONESS V250-3000
Other HONESS V250-3000 CNC punching machine
Punzonadora CNC Other HONESS V250-3000
Poinçonneuse à cnc Other HONESS V250-3000
CNC stroj za bušenje Other HONESS V250-3000
Other HONESS V250-3000 CNC lyukasztógép
Punzonatrice CNC Other HONESS V250-3000
CNC perforavimo mašina Other HONESS V250-3000
Other HONESS V250-3000 CNC-ponsmachine
Wykrawarka CNC Other HONESS V250-3000
Máquina de perfuração CNC Other HONESS V250-3000
Mașină de perforat CNC Other HONESS V250-3000
Other HONESS V250-3000 Перфоратор с ЧПУ
CNC mašina za probijanje Other HONESS V250-3000
Other HONESS V250-3000 CNC stansmaskin
CNC punch makinesi Other HONESS V250-3000
EN
- Languages
English (GB)