Vacuum blender OLSA brand 150 liters
Useful capacity 150 liters max. / 40 liters min. (Total volume 285 liters)
Mixing carried out using 3 types of agitators:
A. Anchor stirrer equipped with scrapers (10 to 60 rpm).
B. Counter-rotating agitator with horizontal blades, coaxial with the preceding one (20 to 160 rpm).
C. Bottom-mounted fast stirrer = foam concentrate (500 to 2500 rpm)
It is possible to replace the foam concentrate blade to have a minimum mixing of 20L
Fixed 316L stainless steel tank with double jacket.
Electric heating system (155°C max).
Cooling system.
The minimum cooling temperature is limited by the temperature of the mains water
Temperature sensor
The heating system adapts to the temperature of the material measured by the temperature sensor at the bottom of the tank
2 outlets at the bottom of the tank controlled by a pneumatic valve (diameter 30 mm), one of which is connected to the recirculation system
Recirculation system with lobe pump (diameter 25mm).
1 manual sampling valve (diameter 10mm).
The recirculation system goes from the bottom of the tank to the top. Two tanks can be connected in the middle of the circuit
Be careful, the mixture must be at least viscous to be able to use the recirculation system (the lobe pump is the limiting factor)
Venturi pump -0.7 bar
CIP (Cleaning In Place) with water (2 bars) integrated including 2 washing balls under the cover and 1 washing pump.
The evacuation of the cleaning water is carried out by a way behind the machine which can be connected directly to a recovery tank
In addition, the CIP cleans the entire mixer and is equipped with a system that allows the incorporation of detergent in addition to water.
This system is a real plus because it allows you not to be in contact with the products during cleaning and to save time because it is managed by a (configurable) program.
316L stainless steel lid fitted with a geared motor raising/lowering system (bi-manual control)
1 Porthole with wiper and light
1 diaphragm valve with fragrance bowl
2 clamp mounts
1 vacuum gauge with clamp
1 vent with silencer and pneumatic valve fixed by clamp
1 vapor condenser on the lid with cooled double jacket
1 bottle of product added by gravity of 30L by manual valve (can be connected to another tank)
1 vacuum trap.
1 suction valve
Stainless steel frame
316L stainless steel cabinet comprising for the electrical part: PLC S7-300 – Vue PC software – Touch screen – Keyboard – Variable speed drives
The software is very easy to use and allows you to follow / save the data curves of the different sensors present on the mixer
Elements necessary to operate the mixer: Cooling water max 3 bars and 2000L/h. Compressed air 6 bars – Total power 28 KW – Voltage 400V+N – Control voltage 24 Volts
Dimensions: 2300 mm x 1500 mm x 2500mm-3200mm (tank closed-open)
Weight 1800 Kg
Blender previously used for mascara

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Volume capacity 150 L
Max T° 155 °
Working pressure 3 bar
Mixing speed 2500 rpm
Motor Power 28 kW
S/ steel type 316L
-------------------
Length x width x height 2300.0 × 1500.0 × 3200.0
Weight 1800 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible
Client type Reseller
Active since 2008
Offers online 58
Last activity March 25, 2024

Description

Vacuum blender OLSA brand 150 liters
Useful capacity 150 liters max. / 40 liters min. (Total volume 285 liters)
Mixing carried out using 3 types of agitators:
A. Anchor stirrer equipped with scrapers (10 to 60 rpm).
B. Counter-rotating agitator with horizontal blades, coaxial with the preceding one (20 to 160 rpm).
C. Bottom-mounted fast stirrer = foam concentrate (500 to 2500 rpm)
It is possible to replace the foam concentrate blade to have a minimum mixing of 20L
Fixed 316L stainless steel tank with double jacket.
Electric heating system (155°C max).
Cooling system.
The minimum cooling temperature is limited by the temperature of the mains water
Temperature sensor
The heating system adapts to the temperature of the material measured by the temperature sensor at the bottom of the tank
2 outlets at the bottom of the tank controlled by a pneumatic valve (diameter 30 mm), one of which is connected to the recirculation system
Recirculation system with lobe pump (diameter 25mm).
1 manual sampling valve (diameter 10mm).
The recirculation system goes from the bottom of the tank to the top. Two tanks can be connected in the middle of the circuit
Be careful, the mixture must be at least viscous to be able to use the recirculation system (the lobe pump is the limiting factor)
Venturi pump -0.7 bar
CIP (Cleaning In Place) with water (2 bars) integrated including 2 washing balls under the cover and 1 washing pump.
The evacuation of the cleaning water is carried out by a way behind the machine which can be connected directly to a recovery tank
In addition, the CIP cleans the entire mixer and is equipped with a system that allows the incorporation of detergent in addition to water.
This system is a real plus because it allows you not to be in contact with the products during cleaning and to save time because it is managed by a (configurable) program.
316L stainless steel lid fitted with a geared motor raising/lowering system (bi-manual control)
1 Porthole with wiper and light
1 diaphragm valve with fragrance bowl
2 clamp mounts
1 vacuum gauge with clamp
1 vent with silencer and pneumatic valve fixed by clamp
1 vapor condenser on the lid with cooled double jacket
1 bottle of product added by gravity of 30L by manual valve (can be connected to another tank)
1 vacuum trap.
1 suction valve
Stainless steel frame
316L stainless steel cabinet comprising for the electrical part: PLC S7-300 – Vue PC software – Touch screen – Keyboard – Variable speed drives
The software is very easy to use and allows you to follow / save the data curves of the different sensors present on the mixer
Elements necessary to operate the mixer: Cooling water max 3 bars and 2000L/h. Compressed air 6 bars – Total power 28 KW – Voltage 400V+N – Control voltage 24 Volts
Dimensions: 2300 mm x 1500 mm x 2500mm-3200mm (tank closed-open)
Weight 1800 Kg
Blender previously used for mascara

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Volume capacity 150 L
Max T° 155 °
Working pressure 3 bar
Mixing speed 2500 rpm
Motor Power 28 kW
S/ steel type 316L
-------------------
Length x width x height 2300.0 × 1500.0 × 3200.0
Weight 1800 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2008
Offers online 58
Last activity March 25, 2024

Here is a selection of similar machines

OLSA 150 litres Liquid mixer