This OKUMA LB 200 M Lathe was manufactured in 2000. It has 3 axes with X = 180mm, Z = 335 mm, C = 360° and Indexing 0.001°. The center spacing is 300 mm, maximum workable diameter is 530 mm and maximum length is 300 mm. It comes with a chip conveyor, GANTRY OGL with loading/unloading manipulator and palletizer.

CNC: OKUMA OSP U 100 L
Spindle speed range: 50 - 6000 rpm
X-Axis Movement: 180 mm
Z-Axis Movement: 335 mm
Workpiece diameter: 530 mm
Number of tool slots: 12
Chip conveyor: Yes
Chip Conveyor
GANTRY OGL with loading/unloading manipulator and palletizer

Center spacing 300 mm
X-axis = 180 mm // z-axis = 335 mm // rapid feeds x/z 25/30 m/min
C-axis = 360° // indexing 0. 001°
Maximum workable diameter 530 mm
Maximum workable length 300 mm
Max bar passage 53 mm diameter
Spindle speed 50-6,000 rpm
Turret p/tools 12 motorized positions
Chip conveyor
Igf

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Turning length 300 mm
Turning Ø 530 mm
Ø above the bed 530 mm
Ø above transversing slide 420 mm
Length between centers 300 mm
Type of CNC OKUMA OSP U 100 L
X-axis 180 mm
Z-axis 335 mm
Max workpiece weight  kg
Spindle taper
Spindle bore 53 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 12
Turning speed 6000 rpm
Spindle motor power 11 kW
Tailstock no
Bar feeder no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Okuma LB 200 M
Client type Reseller
Active since 2019
Offers online 947
Last activity March 28, 2024

Description

This OKUMA LB 200 M Lathe was manufactured in 2000. It has 3 axes with X = 180mm, Z = 335 mm, C = 360° and Indexing 0.001°. The center spacing is 300 mm, maximum workable diameter is 530 mm and maximum length is 300 mm. It comes with a chip conveyor, GANTRY OGL with loading/unloading manipulator and palletizer.

CNC: OKUMA OSP U 100 L
Spindle speed range: 50 - 6000 rpm
X-Axis Movement: 180 mm
Z-Axis Movement: 335 mm
Workpiece diameter: 530 mm
Number of tool slots: 12
Chip conveyor: Yes
Chip Conveyor
GANTRY OGL with loading/unloading manipulator and palletizer

Center spacing 300 mm
X-axis = 180 mm // z-axis = 335 mm // rapid feeds x/z 25/30 m/min
C-axis = 360° // indexing 0. 001°
Maximum workable diameter 530 mm
Maximum workable length 300 mm
Max bar passage 53 mm diameter
Spindle speed 50-6,000 rpm
Turret p/tools 12 motorized positions
Chip conveyor
Igf

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Turning length 300 mm
Turning Ø 530 mm
Ø above the bed 530 mm
Ø above transversing slide 420 mm
Length between centers 300 mm
Type of CNC OKUMA OSP U 100 L
X-axis 180 mm
Z-axis 335 mm
Max workpiece weight  kg
Spindle taper
Spindle bore 53 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 12
Turning speed 6000 rpm
Spindle motor power 11 kW
Tailstock no
Bar feeder no
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 947
Last activity March 28, 2024

Here is a selection of similar machines

Okuma LB 200 M cnc lathe