Specifications

Turning length 1000 mm
Turning Ø 340 mm
Ø above the bed 530 mm
Length between centers 1020 mm
Type of CNC OKUMA OSP 7000 L
X-axis 260 mm
Z-axis 1020 mm
Spindle taper
Number of tools on turret 12
Turning speed 3500 rpm
Spindle motor power 15 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 3485.0 × 1895.0 × 2030.0
Weight 5900 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Okuma LB 15-II

Description

This 3-axis Okuma LB 15-II M horizontal turning machine was manufactured in 1995. It features an OSP 7000 L control, a 12-station tool holder, hydraulic tailstock, and a chip removal system. The machine supports a maximum turning diameter of Ø 340 mm and a distance between centers of 1020 mm. It's equipped with a spindle speed up to 3500 rpm and a rapid feed rate on the Z axis of 20,000 mm/min. For more information about this horizontal turning machine, please reach out to us.

Machine width: 1895
Machine depth: 3485
Machine height: 2030
Machine weight: 5900
CNC: OKUMA OSP 7000 L
Spindle speed range: 45 - 3500 rpm
Spindle motor power: 15/11 kW - 20/15 hp (20 min/cont.)
Number of axis: 3
X-Axis Movement: 260 mm
X-Axis Working Feed: 0.001 - 1,000,000 mm/rev
X-Axis Rapid Traverse: 15,000 mm/min
Z-Axis Movement: 1020 mm
Z-Axis Working Feed: 0.001 - 1,000,000 mm/rev
Z-Axis Rapid Traverse: 20,000 mm/min
C-Axis Movement: 360° (0.001° unit)
C-Axis Working Feed: 200 min⁻¹
Workpiece drm: 530 mm
Workpiece X: 1000 mm
Self-centering: 250 mm SMW AUTOBLOK
Tool Presetting
12-station Tool Holder
Hydraulic Tailstock
Chip Removal System
Lighting System
ll necessary documentation: Operating and Maintenance Manual, Programming Manual, Electrical Schematics Manual

C-axis rapid feed rate: 200 min⁻¹
Simultaneous tri-axial control (x, z, and c axes)
Linear interpolation and circular interpolation
Speed control: direct sb control with 4 digits
Manual intervention mechanism: adjustable from 50 to 200%
Various drilling and cutting cycles with repeat function
Tailstock spindle diameter: 90 mm
Conical hole of tailstock spindle: cm5
Tailstock spindle travel: 120 mm
Power supply voltage: 400 v - 50 hz
Machine has always been maintained by the manufacturer and is in excellent working condition
Machine still under power

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 1028
Last activity Dec. 5, 2024

Description

This 3-axis Okuma LB 15-II M horizontal turning machine was manufactured in 1995. It features an OSP 7000 L control, a 12-station tool holder, hydraulic tailstock, and a chip removal system. The machine supports a maximum turning diameter of Ø 340 mm and a distance between centers of 1020 mm. It's equipped with a spindle speed up to 3500 rpm and a rapid feed rate on the Z axis of 20,000 mm/min. For more information about this horizontal turning machine, please reach out to us.

Machine width: 1895
Machine depth: 3485
Machine height: 2030
Machine weight: 5900
CNC: OKUMA OSP 7000 L
Spindle speed range: 45 - 3500 rpm
Spindle motor power: 15/11 kW - 20/15 hp (20 min/cont.)
Number of axis: 3
X-Axis Movement: 260 mm
X-Axis Working Feed: 0.001 - 1,000,000 mm/rev
X-Axis Rapid Traverse: 15,000 mm/min
Z-Axis Movement: 1020 mm
Z-Axis Working Feed: 0.001 - 1,000,000 mm/rev
Z-Axis Rapid Traverse: 20,000 mm/min
C-Axis Movement: 360° (0.001° unit)
C-Axis Working Feed: 200 min⁻¹
Workpiece drm: 530 mm
Workpiece X: 1000 mm
Self-centering: 250 mm SMW AUTOBLOK
Tool Presetting
12-station Tool Holder
Hydraulic Tailstock
Chip Removal System
Lighting System
ll necessary documentation: Operating and Maintenance Manual, Programming Manual, Electrical Schematics Manual

C-axis rapid feed rate: 200 min⁻¹
Simultaneous tri-axial control (x, z, and c axes)
Linear interpolation and circular interpolation
Speed control: direct sb control with 4 digits
Manual intervention mechanism: adjustable from 50 to 200%
Various drilling and cutting cycles with repeat function
Tailstock spindle diameter: 90 mm
Conical hole of tailstock spindle: cm5
Tailstock spindle travel: 120 mm
Power supply voltage: 400 v - 50 hz
Machine has always been maintained by the manufacturer and is in excellent working condition
Machine still under power

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Turning length 1000 mm
Turning Ø 340 mm
Ø above the bed 530 mm
Length between centers 1020 mm
Type of CNC OKUMA OSP 7000 L
X-axis 260 mm
Z-axis 1020 mm
Spindle taper
Number of tools on turret 12
Turning speed 3500 rpm
Spindle motor power 15 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 3485.0 × 1895.0 × 2030.0
Weight 5900 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 1028
Last activity Dec. 5, 2024

Here is a selection of similar machines

Okuma LB 15-II M cnc lathe