| Manufacturer | Nutek |
|---|---|
| Model | NTM410XXL-1000-1 |
| Year | 2013 |
| Location | United Kingdom
|
| Category | Handling - Conveyors |
| Passage length | 850 mm |
| Passage width | 535 mm |
| Length x width x height | 1000.0 × 860.0 × 910.0 |
| Weight | 80 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 21/05/2026 |
| Product id | P230810037 |
| Language |
Nutek NTM410XXL-1000-1
Dopravník Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1 Förderband
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1 Conveyor
Transportadora Nutek NTM410XXL-1000-1
Convoyeur Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nastro trasportatore Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Taśmociąg Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1 Ленточный конвейер
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Konveyör Nutek NTM410XXL-1000-1
|
The Nutek NTM410XXL-1000-1 Inspection Conveyor is designed for precise transfer and inspection of printed circuit boards (PCBs) within a production line. Manufactured in 2013, this conveyor features a robust aluminum frame with vertical legs and a horizontal support bar, ensuring structural stability. It measures 1000 mm in length, 860 mm in width, and 910 mm in height, with a weight of approximately 80 kg.
The conveyor operates with a transfer height of 900 mm (±25 mm) and accommodates PCB sizes ranging from 50 to 535 mm in width and 80 to 850 mm in length. It supports product thicknesses between 0.60 and 1.60 mm, with component heights up to 30 mm both above and below the PCB. The machine runs on a voltage supply of 220V at 50/60 Hz.
Functionally, the conveyor serves to transfer PCBs from an upstream machine to a downstream machine. It can operate in two distinct modes: Linking mode, where it transfers PCBs through communication signals between machines, and Inspection mode, which adds a visual inspection feature. In Inspection mode, the PCB is held at a check sensor position on the conveyor for inspection, after which a RELEASE push button allows resumption of PCB transfer. Only one PCB is permitted on the conveyor during each transfer cycle.
The conveyor features a variable width design and includes a control panel equipped with power, start, stop, check buttons, and a reset switch for operational control. An emergency stop button with a red top and yellow base is located on the right side of the control panel to ensure safety. A black power cable is coiled and hanging from the conveyor frame for power connection.
This inspection conveyor is suitable for integration into electronic manufacturing lines requiring precise PCB handling and inspection capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Nutek Inspection Conveyor, XXL size
Type: NTM410XXL-1000-1
Year of Manufacture: 2013
Direction: Left to Right
Transfer height: 900mm (+/-25mm)
PCB size: 50 – 535mm (W)/ 80 – 850mm (L)
Product thickness: 0.60 – 1.60mm
Component Height: Top: 30mm max/ Below: 30mm max
Voltage: 220V, 50/60Hz
Pressure: – Bar
Air consumption: – l/minute
Dimension (in mm): 1000 (W) x 860 (D) x 910 (H)
Weight: 80Kg
Function:
This machine function to transfer PCB from Upstream machine to Downstream machine. It can function in two different modes:
Linking mode:
In this mode the machine function to transfer PCB from Upstream to Downstream machine through communication signal.
Inspection Mode:
In this mode, it functions similarly to a Linking conveyor with an additional check feature for visual inspection of PCB. The PCB will be held at the check sensor position of the conveyor for inspection. A RELEASE push button is catered on the machine to resume its PCB transfer after inspection.
Only one PCB is allowed on the machine during each cycle of transfer.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 8 |
| Last activity | May 28, 2026 |
Nutek Inspection Conveyor, XXL size
Type: NTM410XXL-1000-1
Year of Manufacture: 2013
Direction: Left to Right
Transfer height: 900mm (+/-25mm)
PCB size: 50 – 535mm (W)/ 80 – 850mm (L)
Product thickness: 0.60 – 1.60mm
Component Height: Top: 30mm max/ Below: 30mm max
Voltage: 220V, 50/60Hz
Pressure: – Bar
Air consumption: – l/minute
Dimension (in mm): 1000 (W) x 860 (D) x 910 (H)
Weight: 80Kg
Function:
This machine function to transfer PCB from Upstream machine to Downstream machine. It can function in two different modes:
Linking mode:
In this mode the machine function to transfer PCB from Upstream to Downstream machine through communication signal.
Inspection Mode:
In this mode, it functions similarly to a Linking conveyor with an additional check feature for visual inspection of PCB. The PCB will be held at the check sensor position of the conveyor for inspection. A RELEASE push button is catered on the machine to resume its PCB transfer after inspection.
Only one PCB is allowed on the machine during each cycle of transfer.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Handling - Conveyors |
| Passage length | 850 mm |
| Passage width | 535 mm |
| Length x width x height | 1000.0 × 860.0 × 910.0 |
| Weight | 80 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 21/05/2026 |
| Product id | P230810037 |
| Language |
Nutek NTM410XXL-1000-1
Dopravník Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1 Förderband
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1 Conveyor
Transportadora Nutek NTM410XXL-1000-1
Convoyeur Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nastro trasportatore Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Taśmociąg Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1 Ленточный конвейер
Nutek NTM410XXL-1000-1
Nutek NTM410XXL-1000-1
Konveyör Nutek NTM410XXL-1000-1
|
The Nutek NTM410XXL-1000-1 Inspection Conveyor is designed for precise transfer and inspection of printed circuit boards (PCBs) within a production line. Manufactured in 2013, this conveyor features a robust aluminum frame with vertical legs and a horizontal support bar, ensuring structural stability. It measures 1000 mm in length, 860 mm in width, and 910 mm in height, with a weight of approximately 80 kg.
The conveyor operates with a transfer height of 900 mm (±25 mm) and accommodates PCB sizes ranging from 50 to 535 mm in width and 80 to 850 mm in length. It supports product thicknesses between 0.60 and 1.60 mm, with component heights up to 30 mm both above and below the PCB. The machine runs on a voltage supply of 220V at 50/60 Hz.
Functionally, the conveyor serves to transfer PCBs from an upstream machine to a downstream machine. It can operate in two distinct modes: Linking mode, where it transfers PCBs through communication signals between machines, and Inspection mode, which adds a visual inspection feature. In Inspection mode, the PCB is held at a check sensor position on the conveyor for inspection, after which a RELEASE push button allows resumption of PCB transfer. Only one PCB is permitted on the conveyor during each transfer cycle.
The conveyor features a variable width design and includes a control panel equipped with power, start, stop, check buttons, and a reset switch for operational control. An emergency stop button with a red top and yellow base is located on the right side of the control panel to ensure safety. A black power cable is coiled and hanging from the conveyor frame for power connection.
This inspection conveyor is suitable for integration into electronic manufacturing lines requiring precise PCB handling and inspection capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 8 |
| Last activity | May 28, 2026 |
EN
- Languages
English (GB)