| Manufacturer | Nordson DIMA |
|---|---|
| Model | HP 095 |
| Year | 2007 |
| Location | Netherlands
|
The Nordson DIMA HP 095 is a modular pick-and-place machine designed for electronics manufacturing, offering flexibility for both stand-alone and in-line configurations. Manufactured in 2007, this model serves as a scalable solution that can adapt to evolving production requirements. It shares key features with the HP-100 and HP-110 models, including consistent minimum and maximum printed circuit board sizes and overall machine dimensions.
This machine delivers a placement accuracy of 50 µm at 3 sigma, ensuring precise component positioning. It comes standard with a component camera capable of recognizing components from size 0402 up to 42 x 42 mm, addressing co-planarity of fine pitch components and supporting the use of BGAs. The feeder design accommodates components up to 12 mm in height, with the option of a tray platform enabling processing of components up to 16 mm tall.
Equipped with a single feeder bank offering 44 positions for fully intelligent feeders, the HP 095 monitors component availability and stores component details such as name and package. Feeders can be inserted or removed at any position during production without interrupting the process, allowing for efficient reel changes or setup of new feeders on the fly. The 8 and 12 mm feeders occupy only one feeder position each.
The machine operates at speeds up to 3,000 components per hour according to the IPC standard IPC9850 and can be upgraded to increase feeder positions to 132, support smaller components like 0201 and 01005, and boost speed to 4,600 components per hour. When paired with Nordson DIMA's CAD converter software and offline feeder programming station, it enables zero changeover time.
From the images, the machine appears to be in good physical condition with no visible damage. It features multiple feeder slots in the lower front section, a control panel with an emergency stop button on the left side, a monitor attached on the right side, and a signal tower light mounted on top, enhancing operational safety and monitoring.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
HP-095 (stand-alone and in-line) modular pick & place machine. According to the company, the machine can be the basic start for every electronics manufacturer that can grow with new requirements in the future. The modular pick & place machine uses the same software and a fully intelligent feeder concept as the HP-100 and HP-110. The new machine models have many similarities with the HP-100 and HP-110 such as the minimum and maximum printed circuit board size and across all machine dimensions. The placement accuracy of 50 µ at 3 sigma is also guaranteed.
The HP-090 and HP-095 have a component camera as standard to be able to recognize components ranging from 0402 up to and including components with a size of 42 x 42 mm. Co-planarity of fine pitch components and the use of BGAs are also addressed with this camera.
The design of the feeders allows components up to 12 mm high and by using a tray platform, components up to 16 mm can also be processed in this machine. Both new models have a single feeder bank standard with 44 positions for the company's fully intelligent feeders. These feeders not only monitor the amount of components still available on a reel, but also contain information such as the component name and package. The feeders can be inserted or removed from the machine at any position at any time during production without disrupting the production process. This takes advantage of the possibility to change an empty reel, or to set up a new set of feeders during production without stopping the current production. The 8 and 12 mm feeders only take up 1 feeder position.
The speed of the HP-090 and HP-095 is up to 3,000 cph according to the IPC standard IPC9850. Both models can be upgraded in the field in several steps. Available upgrades increase the number of feeder positions to 132 feeders, use of 0201 and 01005 components and increase speed to 4,600 cph. When combined with the company’s CAD converter software and offline feeder programming station, zero changeover time can be guaranteed.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 15 |
| Last activity | July 16, 2026 |
HP-095 (stand-alone and in-line) modular pick & place machine. According to the company, the machine can be the basic start for every electronics manufacturer that can grow with new requirements in the future. The modular pick & place machine uses the same software and a fully intelligent feeder concept as the HP-100 and HP-110. The new machine models have many similarities with the HP-100 and HP-110 such as the minimum and maximum printed circuit board size and across all machine dimensions. The placement accuracy of 50 µ at 3 sigma is also guaranteed.
The HP-090 and HP-095 have a component camera as standard to be able to recognize components ranging from 0402 up to and including components with a size of 42 x 42 mm. Co-planarity of fine pitch components and the use of BGAs are also addressed with this camera.
The design of the feeders allows components up to 12 mm high and by using a tray platform, components up to 16 mm can also be processed in this machine. Both new models have a single feeder bank standard with 44 positions for the company's fully intelligent feeders. These feeders not only monitor the amount of components still available on a reel, but also contain information such as the component name and package. The feeders can be inserted or removed from the machine at any position at any time during production without disrupting the production process. This takes advantage of the possibility to change an empty reel, or to set up a new set of feeders during production without stopping the current production. The 8 and 12 mm feeders only take up 1 feeder position.
The speed of the HP-090 and HP-095 is up to 3,000 cph according to the IPC standard IPC9850. Both models can be upgraded in the field in several steps. Available upgrades increase the number of feeder positions to 132 feeders, use of 0201 and 01005 components and increase speed to 4,600 cph. When combined with the company’s CAD converter software and offline feeder programming station, zero changeover time can be guaranteed.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
The Nordson DIMA HP 095 is a modular pick-and-place machine designed for electronics manufacturing, offering flexibility for both stand-alone and in-line configurations. Manufactured in 2007, this model serves as a scalable solution that can adapt to evolving production requirements. It shares key features with the HP-100 and HP-110 models, including consistent minimum and maximum printed circuit board sizes and overall machine dimensions.
This machine delivers a placement accuracy of 50 µm at 3 sigma, ensuring precise component positioning. It comes standard with a component camera capable of recognizing components from size 0402 up to 42 x 42 mm, addressing co-planarity of fine pitch components and supporting the use of BGAs. The feeder design accommodates components up to 12 mm in height, with the option of a tray platform enabling processing of components up to 16 mm tall.
Equipped with a single feeder bank offering 44 positions for fully intelligent feeders, the HP 095 monitors component availability and stores component details such as name and package. Feeders can be inserted or removed at any position during production without interrupting the process, allowing for efficient reel changes or setup of new feeders on the fly. The 8 and 12 mm feeders occupy only one feeder position each.
The machine operates at speeds up to 3,000 components per hour according to the IPC standard IPC9850 and can be upgraded to increase feeder positions to 132, support smaller components like 0201 and 01005, and boost speed to 4,600 components per hour. When paired with Nordson DIMA's CAD converter software and offline feeder programming station, it enables zero changeover time.
From the images, the machine appears to be in good physical condition with no visible damage. It features multiple feeder slots in the lower front section, a control panel with an emergency stop button on the left side, a monitor attached on the right side, and a signal tower light mounted on top, enhancing operational safety and monitoring.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 15 |
| Last activity | July 16, 2026 |
Машина за вземане и поставяне Nordson DIMA HP 095
Odsazovací stroj Nordson DIMA HP 095
Nordson DIMA HP 095 Pick-and-place maskine
Nordson DIMA HP 095 Bestückungsautomat
Μηχάνημα επιλογής και τοποθέτησης Nordson DIMA HP 095
Nordson DIMA HP 095 Pick-and-place machine
Máquina de inserción Nordson DIMA HP 095
Machine de placement Nordson DIMA HP 095
Pick-and-place stroj Nordson DIMA HP 095
Nordson DIMA HP 095 Pick-and-place gép
Assemblatrice SMT Nordson DIMA HP 095
Išrinkimo ir padavimo mašina Nordson DIMA HP 095
Nordson DIMA HP 095 Pick-and-place-machine
Maszyna do montażu powierzchniowego Nordson DIMA HP 095
Máquina de pegar e colocar Nordson DIMA HP 095
Mașină de ridicare și plasare Nordson DIMA HP 095
Nordson DIMA HP 095 Захватывающая установка
Mašina za biranje i postavljanje Nordson DIMA HP 095
Nordson DIMA HP 095 Pick-and-place-maskin
Al ve Yerleştir Makinası Nordson DIMA HP 095
EN
- Languages
English (GB)