| Manufacturer | Nordson |
|---|---|
| Model | Asymtek MH912L |
| Year | 2011 |
| Location | Netherlands
|
The Nordson Asymtek MH912L is an industrial PCB loader designed for flexible and efficient handling of printed circuit boards. Part of the MH-900 series, this model can be configured for inline or same-side loading operations and supports both single and dual lane conveyors, making it adaptable to various production line setups. It is compatible with Spectrum S-900N and Spectrum II S2-900 series dispensers for integrated loader control, or it can operate independently with other SMEMA equipment.
This loader accommodates a wide range of parts, from very thin frames or strips to large, heavy boats or pallets. Its capacity is flexible, supporting multiple magazines to reduce loading frequency. The system's PLC control allows for future expandability to meet evolving process requirements.
Key specifications include magazine width ranging from 15 mm to 172 mm, magazine length from 50.8 mm to 317.5 mm, and magazine height from 101.6 mm to 279.4 mm. It can hold 1 to 99 parts per magazine, with part dimensions from 15 mm to 160 mm in width, 50.8 mm to 317.5 mm in length, and thickness between 100 µm to 18 mm. Clearance requirements include 3 mm edge clearance and 25 mm overboard and underboard clearances at specified distances from the part edges.
The maximum magazine weight is 6.8 kg, with a maximum carrier weight of 0.9 kg and an elevator payload capacity of 40 kg. The machine dimensions are 625 mm wide by 1250 mm deep, weighing approximately 230 kg.
Electrical requirements are 110-240 VAC at 50/60 Hz with 1.0A nominal and 1.5A peak current at 120 VAC. It requires an air supply of 552 kPa (80 psi) at 1 SCFM.
The MH912L features a tall, rectangular white exterior with a control panel equipped with a screen and buttons, including a large red emergency stop button for safety. A vertical window panel is located on the right side of the upper section, providing visibility into the machine's interior. On top, a stack light indicator with red, yellow, and green lights signals operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
As part of the MH-900 series the MH-912L can be configured for inline or Same-side Loading operation, and supports both single or dual lane conveyors.
Loader controls can be intergrated with the Spectrum S-900N and Spectrum II S2-900 Series dispensers or operate independentely with other SMEMA equipment.
The loader easily manages a wide range of parts, from extremely thin frames or strips to large heavy boats or pallets.
Capacity is flexible; the system can handle multiple magazines for reduced loading frequency. PLC control enables future expandability when the process needs change.
Magazine width Min: 15 mm (0.59 in.)
Max: 172 mm (6.8 in.
Magazine Length Min: 50.8 mm (2.0 in.)
Max: 317.5 mm (12.5 in.)
Magazine Height Min: 101.6 mm (4.0 in.)
Max: 279.4 mm (11.0 in.)
parts per magazine 1 to 99
Part length Min: 50.8 mm (2.0 in.)
Max: 317.5 mm (12.5 in.)
Part Width Min: 15 mm (0.59 in.)
Max: 160 mm (6.3 in.)
Part thickness Min: 100 µm (0.004 in.)
Max: 18 mm (0.71 in.)
Min frame pitch within magazine 2.54 mm (0.10 in.)
Overboard clearance 25 mm @ 3 mm (0.98 @ 0.12 in.) from edge of part
Underboard clearance 25 mm @ 6.5 mm (0.98 @ 0.26 in.) from edge of part
Edge clearance required 3 mm (0.12 in.)
Max. magazine weight: 6.8 kg (15 lb)
Max. carrier weight: 0.9 kg (2 lb)
Max. elevator payload: 40 kg (88 lb)
Facility requirements
Dimensions (Width x Depth) 625 mm wide x 1250 mm deep (24.6 x 49.2 in.)
Voltage 110-240 VAC, 50/60 Hz
Amperage 1.0A nominal, 1.5A peak @ 120 VAC
Air supply 552 kPa (80 psi), 1 SCFM @ 80 psi
Weight 230 kg (507 lbs)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 16 |
| Last activity | July 10, 2026 |
As part of the MH-900 series the MH-912L can be configured for inline or Same-side Loading operation, and supports both single or dual lane conveyors.
Loader controls can be intergrated with the Spectrum S-900N and Spectrum II S2-900 Series dispensers or operate independentely with other SMEMA equipment.
The loader easily manages a wide range of parts, from extremely thin frames or strips to large heavy boats or pallets.
Capacity is flexible; the system can handle multiple magazines for reduced loading frequency. PLC control enables future expandability when the process needs change.
Magazine width Min: 15 mm (0.59 in.)
Max: 172 mm (6.8 in.
Magazine Length Min: 50.8 mm (2.0 in.)
Max: 317.5 mm (12.5 in.)
Magazine Height Min: 101.6 mm (4.0 in.)
Max: 279.4 mm (11.0 in.)
parts per magazine 1 to 99
Part length Min: 50.8 mm (2.0 in.)
Max: 317.5 mm (12.5 in.)
Part Width Min: 15 mm (0.59 in.)
Max: 160 mm (6.3 in.)
Part thickness Min: 100 µm (0.004 in.)
Max: 18 mm (0.71 in.)
Min frame pitch within magazine 2.54 mm (0.10 in.)
Overboard clearance 25 mm @ 3 mm (0.98 @ 0.12 in.) from edge of part
Underboard clearance 25 mm @ 6.5 mm (0.98 @ 0.26 in.) from edge of part
Edge clearance required 3 mm (0.12 in.)
Max. magazine weight: 6.8 kg (15 lb)
Max. carrier weight: 0.9 kg (2 lb)
Max. elevator payload: 40 kg (88 lb)
Facility requirements
Dimensions (Width x Depth) 625 mm wide x 1250 mm deep (24.6 x 49.2 in.)
Voltage 110-240 VAC, 50/60 Hz
Amperage 1.0A nominal, 1.5A peak @ 120 VAC
Air supply 552 kPa (80 psi), 1 SCFM @ 80 psi
Weight 230 kg (507 lbs)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
The Nordson Asymtek MH912L is an industrial PCB loader designed for flexible and efficient handling of printed circuit boards. Part of the MH-900 series, this model can be configured for inline or same-side loading operations and supports both single and dual lane conveyors, making it adaptable to various production line setups. It is compatible with Spectrum S-900N and Spectrum II S2-900 series dispensers for integrated loader control, or it can operate independently with other SMEMA equipment.
This loader accommodates a wide range of parts, from very thin frames or strips to large, heavy boats or pallets. Its capacity is flexible, supporting multiple magazines to reduce loading frequency. The system's PLC control allows for future expandability to meet evolving process requirements.
Key specifications include magazine width ranging from 15 mm to 172 mm, magazine length from 50.8 mm to 317.5 mm, and magazine height from 101.6 mm to 279.4 mm. It can hold 1 to 99 parts per magazine, with part dimensions from 15 mm to 160 mm in width, 50.8 mm to 317.5 mm in length, and thickness between 100 µm to 18 mm. Clearance requirements include 3 mm edge clearance and 25 mm overboard and underboard clearances at specified distances from the part edges.
The maximum magazine weight is 6.8 kg, with a maximum carrier weight of 0.9 kg and an elevator payload capacity of 40 kg. The machine dimensions are 625 mm wide by 1250 mm deep, weighing approximately 230 kg.
Electrical requirements are 110-240 VAC at 50/60 Hz with 1.0A nominal and 1.5A peak current at 120 VAC. It requires an air supply of 552 kPa (80 psi) at 1 SCFM.
The MH912L features a tall, rectangular white exterior with a control panel equipped with a screen and buttons, including a large red emergency stop button for safety. A vertical window panel is located on the right side of the upper section, providing visibility into the machine's interior. On top, a stack light indicator with red, yellow, and green lights signals operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 16 |
| Last activity | July 10, 2026 |
Машина за вземане и поставяне Nordson Asymtek MH912L
Odsazovací stroj Nordson Asymtek MH912L
Nordson Asymtek MH912L Pick-and-place maskine
Nordson Asymtek MH912L Bestückungsautomat
Μηχάνημα επιλογής και τοποθέτησης Nordson Asymtek MH912L
Nordson Asymtek MH912L Pick-and-place machine
Máquina de inserción Nordson Asymtek MH912L
Machine de placement Nordson Asymtek MH912L
Pick-and-place stroj Nordson Asymtek MH912L
Nordson Asymtek MH912L Pick-and-place gép
Assemblatrice SMT Nordson Asymtek MH912L
Išrinkimo ir padavimo mašina Nordson Asymtek MH912L
Nordson Asymtek MH912L Pick-and-place-machine
Maszyna do montażu powierzchniowego Nordson Asymtek MH912L
Máquina de pegar e colocar Nordson Asymtek MH912L
Mașină de ridicare și plasare Nordson Asymtek MH912L
Nordson Asymtek MH912L Захватывающая установка
Mašina za biranje i postavljanje Nordson Asymtek MH912L
Nordson Asymtek MH912L Pick-and-place-maskin
Al ve Yerleştir Makinası Nordson Asymtek MH912L
EN
- Languages
English (GB)