5-axis desktop cnc milling machine
Condition = 99% (has never been used for mass production)
Spesifications:
1. Materials for milling include: Foam, polyurethane modelling board and tooling board, acrylics, engineering plastics, machinable wax, carbon fibre, DuPont™ Corian ® solid surface and an entire range of hardwood
2. Dimensions of the main unit: 990x780x890mm(1130) /38.9 x 30.7 x 35in (44.4in)
3. Working volume: 600 x 600 x 400 mm / 23.6in x 23.6in x 15.7in
4. Mechanical resolution: XYZ axis: 0.036mm/36 microns /0.0014in; BC-axis: 2 arcmin/ 0.034 degrees
5. Electronic resolution: XYZ axis: 4.5microns; BC-axis: 0.25 arcmin /0.0041degrees
6. Mechanical repeatability: XYZ axis: 0.05mm / 0.00196in; BC-axis: 1arcmin
7. Max travel speed XYZ: (X,Y) 15000mm/min / 590in/min; (Z) 3000-6000mm/min / 120-240in/min
8. Max travel speed BC: 20rpm(C) 20rpm(B)
9. Spindle motor: Brushless DC Motor 500W
10. Spindle speed: 15,000rpm
11. Rotary axis travel angle: Infinite - subject to cable length, advised B: ±360°, C: ±360°
12. Attachable end mills: Metric diameter 1-7mm, Metric length 40-150mm, Imperial diameter range of 3/46, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, Imperial length 1.5-9 inches max. (Make sure to use matching size of ER11 collet for diameter of a tool shank.)
13. Interface: USB
14. Control command sets: NC Code
15. Power requirements: 1200W, 240-100V, 50/60hz, 13A, (supplied with IEC powercable for different countries).
16. Power consumption: 1200W
17. Operating noise: During operation: 70dB (A), during standby: 45 dB
18. External dimensions: 109cms x 88cms x 113cms / 43in x 35in x 44in
19. Weight: 48kg, (93kg crated) / 105 lbs (205 lbs crated)
20. Controller: Mach3/ Mach4
21. Software CAM: Supports most CAD/CAM software (providing there is post-processor available)
22. Included items Standard Model: IEC Power plug, USB cable, 15,000rpm 500W Brushless Spindle, ER11 4mm collet, ER11 6mm collet, 4mm uncoated carbide 2 flute ball end mill, ER11 Wrench, Extruder part 1 Hot-End, part 2 Cold-end, PTFE tube part 3
23. Included items Dental Model: 5XM600D: IEC Power plug, USB cable, 15,000rpm 500W Brushless Spindle, ER11 4mm collet, ER11 6mm collet, 2off 2mm Single Flute End Mill, ER11 Wrench, Fixture Tray for 19 aligners with all hardware, Half-enclosure (perspex) with safety switch, Software 5Xtrim + Mach Controller
24. Computer: Model preinstalled with the 32- or 64-bit edition of Windows 10, 8.1, or 7 or an upgraded computer that was preinstalled with Windows 7 or later. (Computer is not included with the machine purchase. Please ensure to have a dedicated laptop to run 5AXISMAKER.)
25. USB cable: Use the included USB cable.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase