Showing 1 - 20 out of 497
Year: 2008
Y stroke | 4390 mm |
---|---|
Tool changer positions |
Z stroke | 1100 mm |
---|
Year:
Working width | 250 mm |
---|---|
Nbr of shafts | 6 |
Working height | 150 mm |
---|---|
Shafts diameter | 40 mm |
Year:
Accu-Systems OCS Optimizing Crosscut Saw equipped with; - 16' infeed, 12" width capacity x 2" thickness, - 10HP main saw arbor motor, Tilt bed design, - 15" colour touchscreen, - dual loop servo controlled pusher with clamp, - servo saw stroke, - "value based optimisation", - accuracy +/- 1/64". - Reads length of material, - reads defects via crayon marking, …Year:
General Specifications: - 125 HP, 230/460/60/3 hard durometer rubber covered contact drum - Hold-down rollers before & after the sanding head with hold-down shoe after - 7.5 HP, 230/460/60/3 conveyor belt feed drive motor, (Safetronics FP5 VFD drive) - Constant passline machine with 18" infeed & 12" outfeed - Smooth top type feed conveyor belt - .75 HP, 230/460/60/3 power …Year: 1990
Sawmills and Sawlines Board edging line Ahlstrom 300 m/min: - production year 1990, last system update 2018 october by Heinola - chain cross conveyor - centering conveyor before scanner - scanner with Siemens control system - conveyor before edger - Ahlstrom Edger SS10 - output conveyor Board edging line Ahlstrom SS10 guarantees a high, continuous yield. Scanning starts after centering …Year: 1995
Specifications Specifications 275 ton Aida Double Crank Gap Press. Model NC2-250(2). 11.81" stroke. 3.15" power ram adjustment. 20.86" Shut Height over the bolster. 20-35 SPM. 82.68" x 27.56" Ram. 106.30" x 36.22" Bed. Equipped With Air clutch and brake Air counterbalances. Hydraulic overloads. Palm buttons. Transfer system. Cushions.Year: 2024
Collecting capacity | 5000 m³/h |
---|
Installed power | 4.10142 kW |
---|
Year: 2024
Collecting capacity | 3500 m³/h |
---|
Installed power | 2.98285 kW |
---|
Year: 2003
Try sorting with 6 pockets Speed: 15 layers per minute OptiGrader Edger - a value optimizing system for board edgers infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms cassettes outfeed conveyorYear:
Conveying Machinery Planer feed table, tested. At speeds up to 80 m/min. Capacity: 80 m/minYear:
Other Woodworking Machinery 1. Side conveyor approx. 1 m with 6 belts. 2. Side conveyor approx. 2 m with 6 belts + 4 stop axels. 3. End mill table with 1 aggregate, 6 dog chains and fair ending. 4. Belt conveyor approx. 12 m. 5. Chain kick-off left, with fair ending. 6. Side conveyor approx. 1,5 m with 6 belts …Year: 1987
Carriage length | 3200 mm |
---|---|
Blade tilting in ° | 90 ° |
Blade speed | 6000 rpm |
---|---|
Engine power | 5.5 kW |
Year: 1986
Type | vertical |
---|---|
Table width | 300 mm |
Table length | 3200 mm |
---|---|
Engine power | 5 kW |
Year: 2015
Collecting capacity | 19800 m³/h |
---|
Fan engine | 4 kW |
---|
Year: 2009
X stroke | 3880 mm |
---|---|
Z stroke | 250 mm |
Table length | 3700 mm |
Y stroke | 2350 mm |
---|---|
CNC | yes |
Table width | 2200 mm |
Year:
Spectrum and Signal Analyzer with a bandwidth capable of 1 GHz and Built-in 5G measurement software. Please see the data sheet for more information.