Showing 1 - 20 out of 771
Year: 2018
Complete HDPE washlineYear: 2016
Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll …Year: ~ 2022
A110 Twin-screw side feeder (ZS-B) The ZS-B allows fillers and additives or chopped glass fibres to be fed in from the side in powder and/or pellet form. The co-rotating screw shafts are largely self-wiping and pro-mote active conveying. The feeder can be attached to the twin-screw extruder in conjunc- tion with a connection housing at any point in the processing …Year: 2007
Complete production plant retreading plant for cold-renewed truck tires Output: 30,000 pieces/year Equipment: Rail system “Helm 500” frame/supports manufacturer TRM Rail length approx. 110m, rail height approx. 2m 76 hooks with rollers 3 processing stations including extraction connections Spray tunnel for rubber solution including suction Roughing machine Matteuzzi RAS 90 DC 4 Matteuzzi RAS 98 E ULTRA roughening machine Roughing …Year: 2016
| Tonnage: 450 | Model: K-TEC 450/2F | Shot Size: 58 OZ (1647 GRAMS) PRIMARY INJECTION, 14.9 OZ (422 GRAMS) SECONDARY INJECTION | Controller Model: MOSAIC | Year: 2016 | Tie-Bar Spacing: 39.37" x 39.37" (1000 MM x 1000 MM) | Platen Dimensions: 53.94" x 56.89" (1370 MM x 1445 MM) | Motor Horsepower: 60 HP | Voltage: 460V | …Year: 2001
Volume | 30 L |
---|---|
Nbr of stations | 1 |
Nbr of heads | 2 |
---|
Year: 2019
COMPLETELY REBUILT SENCORP MODEL 2500, 30′ X 33′ INLINE THERMOFORMER Model 2500, 2019 30′ X 33′ MAXIMUM MOLD SIZE TOP AND BOTTOM PREHEAT OVEN TOP AND BOTTOM PLATENS IN FORM STATION HYDRAULIC INLINE TRIM STATION PIN CHAIN MATERIAL TRANSPORT 25 TON FORM PRESS new 25ton form station rebuilt trim station new servo index system new upper and lower heating banks …Year: 2012
Extruder diameter | 120 mm |
---|
Year:
Used Extrutech E-925 extruder and pre-conditioner Includes 400 HP motor and suitable VFD for rpm control Screws and head liners nearly new Less than 2,000 hours on extruderYear:
Used Extru-tech E-925 extruder and pre-conditioner Includes 400 HP motor and suitable VFD for rpm control Screws and head liners nearly new Less than 2,000 hours on extruderYear: 2014
Description Techne Model ADVT2 750 Continuous Extrusion Blow Molding Machine (Co-Ex) – Year- 2014 – Machine is ALL ELECTRIC – Machine has in machine trimming capability- fully trimmed, oriented, ready to fill bottles exit machine – Head type- CO-EX- makes a (3) layer parison – Head configuration- (6) parison head with 110 mm center distances between dies –Extruder diameters- 3 …Year: 2004
Volume | 15 L |
---|
Nbr of stations | 1 |
---|
Year: 2006
Output capacity: 22,000 bph @ 2.0L PET bottles Max. output capacity: 28,000 bph Working hours: 22,000 hrs. Neck personalisation: PCO 1810 Max. bottle size: 2.0L (PUPM mould holders) Machine was disconnected March 2019 and has not been used since then. Still set up. Includes: * Preform tipper * Preform hopper/elevator * Preform orientator and infeed rail * spare parts package …Year: 2007
Description: 2007 Mac 5 x 8 four Station rotary thermoformer 60” x 96” max mold size Preheat oven, ceramic heater Final heat oven. Ceramic heaters Motor driven platens Currently under power I Specifications from OEM brochure and equipped with are described to the best of our knowledge. ALL items should be confirmed by buyer.Year:
Used 34mm Coperion Model ZSK34 co-rotating twin screw extruder. New 2012. Driven by 62 kw (87 hp) AC motor with variable frequency drive. 380 volt AC input, 50/60 herz.Year:
TAZMO SOG TOOL MODEL: CSX2132N This Equipment is a through processing apparatus of SOG coating to baking, which allows fully automatic formation of films 150mm substrates from cassette to cassette. This system, in which substrate transfer is performed by a two-hand robot, comes with a standard cup, a cool plate, three bake plates, an aligner, a cooling area, a vacuum …Year: 2000
Extruder diameter | 150 mm |
---|
Year: 2005
Extruder diameter | 2 mm |
---|
Year: 2011
Weima Model WLK 20 SUPER JUMBO Single Shaft Shredder – New 2011 – 180 HP Motor – Less than 2000 Hour on machine! Machuiner is in Excellent Condition and can be seen running! Hopper Opening: 78″ x 72″ Horizontal Ram 165 Cuytters Cuytters 4 Times Indexable Concave Shaped Cutting Knives 2 Rows of Knives on V Rotor Includes Control Panel …