Showing 1 - 20 out of 23
Year: 2004
Clamping force | 40 T |
---|---|
Pressure on material | 2254 bar |
Mould size |
Shot volume | 49 cm³ |
---|---|
Robot interface |
Year: 2004
Clamping force | 100 T |
---|---|
Tie bar spacing (H) | 420 mm |
Shot weight | 65 g |
Screw diameter | 30 mm |
---|---|
Tie bar spacing (V) | 420 mm |
Pressure on material | 2500 bar |
Year: 2004
Clamping force | 150 T |
---|---|
Tie bar spacing (H) | 570 mm |
Pressure on material | 2000 bar |
Screw diameter | 60 mm |
---|---|
Tie bar spacing (V) | 570 mm |
Bi-metal screw | Yes |
Year: 2004
Clamping force | 80 T |
---|---|
Tie bar spacing (H) | 405 mm |
Shot volume | 156 cm³ |
Screw diameter | 35 mm |
---|---|
Tie bar spacing (V) | 405 mm |
Shot weight | 142 g |
Year: 2004
Clamping force | 130 T |
---|---|
Pressure on material | 2080 bar |
Screw diameter | 55 mm |
---|---|
Opening of the press | 575 mm |
Year: 2004
MACHINE INFORMATION Machine description: laminating machine Machine manufacturer: NORDSON Model: BC62 Year of production: 2004 Status: like new (exhibition piece)Year: 2004
YEAR: 2004 BRAND: ALURO QTY: 1 Second-hand Thermal Break Assembly Line – ALURO-LLERYear: 2004
Clamp Force 150 Tonne (1,500KN) DBTB 505 x 505mm (761mm Diagonal) Screw Dia 40 + 30mm Min/Max Mould Thickness 250-550mm Injection units 480/150 & 220/150 Core Pull 1Year: 2004
Horizontal Injection Mold Manufactured 2004 Specifications Features Shot Size: 16 oz. Tie Bar Spacing: 20" x 20" Mold Thickness: 7"/20" Model: GP-Plus 190 EQUIPPED WITH: - Barber Coleman 4000 Eurotherm Controller - 10-Stage Injection Control - Automatic Mold Height Adjustment - Onbaord machine and system diagnostics - Process and machine alarms - 5-Point Double ToggleYear: 2004
The FRE 150 Ram Extruder is designed for the manufacture of endless PTFE sections in vertical operation. The die is heated up to extrusion temperature by means of heating sleeves arranged on the extrusion pipe. Thermocouples are installed between the heating sleeves to regulate and control the extrusion temperature. Max Extrusion Force: 100Kn (22480 lbf) Max Temp: 400℃ (752℉) Control …Year: 2004
Pallmann Used Granulator Agglomerator System PFV200 – 2004 Complete System – Installed and Operational Model: PFV200 Voltage: 460V PFV200/15 Agglomerator Knife Mill Model PSP 400×500 with Profile/sheet Shute Hot Melt Granulator Model PSHG 300×500 Cooling & Air Classifying Unit Bag Station with dual Discharge Control System with Allen-Bradley Panelview Control Approx 500 lb/hr Good for low density materialYear: 2004
Description: Used Thermwood C40 3 axis routerYear: 2004
Brand Akei Model 70SN-TS-DH-PVC Year of Mfg 2004 Platen Automatic Dual Take Out / Trim Shuttle with auto dome trim take out Motor 50hp with Fugi FRENIC 5000G9S Vector Drive Barrel 80mm – 24:1 Head 60mm Dual Head- 165mmOC Programmer PC MOOG bloc 64 PRG parison programmerYear: 2004
Brand Sencorp Model 2500 Year of Mfg 2004 Forming Area 30" x 33" Top Stroke 5" Bottom Stroke 5" Forming Press 25 Tons Trim Press 75 Tons Controls Sentroller 2000 / Siemens SIMATIC Voltage 460VYear: 2004
Brand Akei Model AO-70SN-TS-DH-PVC Year of Mfg 2004 Platen Automatic Dual Take Out / Trim Shuttle with auto dome trim take out Motor 50hp with Fugi FRENIC 5000G9S Vector Drive Barrel 80mm – 24:1 Head 60mm Dual Head- 165mmOC Programmer PC MOOG bloc 64 PRG parison programmer Hours ~24,372Year: 2004
Horizontal Injection Mold (81021) Manufactured 2004 Specifications Features Shot Size: 35 oz. Tie Bar Spacing: 26" x 26" Platen Size: 37.4" x 37.4" Daylight: 47.2" Clamp Stroke: 21.3"/36.2" Mold Thickness: 11"/26" Model: H225RS65/65 EQUIPPED WITH: - Polaris Control - 480 volt - Hydraulic ejectors AVAILABLE AT ADDITIONAL COST: - Sepro Robot Model Success 22 Year: 2016 PRICE........P.O.R. Photos available. 2 …