Showing 1 - 20 out of 857
Year: 2020
LabTest 6.031.1.2 universal testing machine for tensile, bending and compression tests The machine has only 100 working hours Basic technical data of the Lab Test 6.031.1.2 machine Maximum test strength Number of columns 1 Number of ball screws 1 Number of linear guides 1+2 Minimum testing speed 0.0005 mm/min Maximum testing speed 1200 mm/min Machine drive resolution 0.066pm/imp Repeatability of …Year: 2021
This machine can be used for straight cutting, threading, edge cutting, hole drilling, profiling, 3D profiling. Kitchen counters, windowsills, stairs for making other marble, limestone and granite products. 3000r/min, knife size 350mm, X axis 3500mm, Y axis 2000mm, Z axis 260mm, A axis 360°, B axis automatic 0-90° chamfering, cutting width 70mm, work table 3500x2000mm, total external size 5000x2750x2100mm, machine …Year: 2016
Number of axis | 6 |
---|---|
Payload in kgs | 40 kg |
Reach in mm | 2550 mm |
---|---|
Control type | IRC5 singel |
Year: 2021
Number of axis | 6 |
---|---|
Payload in kgs | 40 kg |
Reach in mm | 2550 mm |
---|---|
Control type | IRC5 M2004 |
Year: 2001
This Brown & Sharpe Mistral Measuring machine was manufactured in the year 2001. It has 3 axis. The machine has a table size of 1250 x 2200 mm. Number of axis: 3 Outer length: 2200 mm Outer width: 1250 mmYear: 2020
Number of axis | 6 |
---|---|
Payload in kgs | 6 kg |
Reach in mm | 1650 mm |
---|---|
Control type | Kawasaki F60 / E71 |
Year: 2014
Application type | Handling |
---|---|
Reach in mm | 550 mm |
Control type | CR750 |
Number of axis | 4 |
---|---|
Payload in kgs | 6 kg |
Treated against heat | No |
Year: 2021
3-PLY MASK MANUFACTURING MACHINE 1 SET EAR LOOP MACHINE - 10 HEAD 2 SETSYear: 2012
Power | 250 kW |
---|---|
Fuel | natural gas |
Pressure | 7 bar |
---|
Year: 2017
Application type | Handling |
---|---|
Reach in mm | 1813 mm |
Control type | Teach Pendant |
Number of axis | 6 |
---|---|
Payload in kgs | 35 kg |
Treated against heat | No |
Year: 2007
Application type | Welding |
---|---|
Control type |
Payload in kgs | 8 kg |
---|
Year: 2012
Application type | Welding |
---|---|
Control type | DX 100 |
Payload in kgs | 1500 kg |
---|
Year: 2020
Number of axis | 6 |
---|---|
Payload in kgs | 8.8 kg |
Reach in mm | 2236 mm |
---|---|
Control type |
Year: 2011
Sawdust stove INTERMET sawdust stove for sale, power 500 kW, year of production 2011. The stove is perfect for carpentry shops or sawmills where sawdust is the waste. The stove is complete and ready for transport.Year: 2016
Schleuniger Wire Twister 3300 AD machine New, packed, ready for transport. The photos are for illustration purposes only.Year: 2007
Steam Production | kg/h |
---|---|
Pressure | bar |
Power | 7800 kW |
---|---|
Fuel | natural gas |
Year: 2008
HERA model measuring machine with PH 10 sensor built in 2008 by Metris Italia Testable on site by appointmentYear: 2014
RTM INJECTION SYSTEM RTM cannon injection system High pressure NEWYear: 2010
This is a belt dryer designed to dry wood chips using steam: Initial humidity 50%, humidity after treatment 20%, wet production 1200 Kg/h, dry production 750 Kg/h. Thermal power used 385,000 KgCal/h.