Showing 1 - 20 out of 66
Year: ~ 2019
SPRAY DRYER TYPE: GRT-20 1. Stainless steel insulated main chamber, inner and outer jacket made of stainless steel. Dimensions: tower cylinder - diameter 1100mm / height 1200mm, tower cone - height 850mm. The total height of the tower placed on the structure is - 3.1 m. 2. The device has a powder cyclone equipped with flap valves and a powder …Year: 2014
Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum pump, vacuum controller, radiator, thermostat.Year: 1996
Used compactor manufactured by HOSOKAWA BEPEX GmbH, model L200/50P. Year of construction: 1996. Roll dimensions: 200mm x 5mm Productivity: approx. 50 kg/h Material of contact parts: stainless steel AISI 304 The set includes a tank made of stainless steel: non contact parts made of AISI 304; tank made of AISI 316L Total capacity: 380 liters Working capacity: 350 liters Press …Year:
Volume capacity | 2840 L |
---|---|
Motor Power | 7.5 kW |
Mixing speed | 1445 rpm |
---|---|
S/ steel type |
Year:
Volume capacity | 25 L |
---|---|
Motor Power | 1.1 kW |
Mixing speed | 1415 rpm |
---|---|
S/ steel type | AISI 316 |
Year:
Used rotary tablet press by Kilian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main …Year: 2024
Capacity | 1000 L |
---|---|
Pressure | 0 bar |
With agitator | no |
Max t° | 80 °C |
---|---|
Double jacketed | yes |
Melting tank | No |
Year:
Used Rotary tablet press by Manesty type Rotapress MKII series 45. Machine has carbon steel rotating table with 45 stations. Working on two sides. Working pressing pressure up to 6.5 ton. Minimal diameter of tablet 5 mm, maximal up to 15.6 mm. Maximum filling depth up to 17.5 mm. Output up to 8200 tablets/min. Machine is driven by EL. Motor …Year: 1986
Capacity | 105 L |
---|---|
Pressure | 6 bar |
With agitator | yes |
Max t° | 250 °C |
---|---|
Double jacketed | yes |
S/s type |
Year: 2005
Used 5000 L/H APV G37 2-stage homogeniser with 200 Bar max. pressure. 37 kW motor installed. New: 2005 Condition: ExcellentYear:
Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection …Year:
Used FLIMER 300 liter (Czech republic) stainless steel homogenizer. Approximately 300 litre total capacity. Internal rated full vacuum. Scraper stirrer, vacuum pump, circulate pump, electrically heated and control panel.Year:
Used stainless steel contact parts homogenizing mill by Bema (PL). Machine has stainless steel feeding tank with volume about 38 l, equipped with piston for pressing product into the homogenizing mill. Working on compressed air with pressure up to 2 bar. Mill is belt driven by el motor 4 kW, 1410 rpm, 380 V, 50 hz. Working rotation on mill …Year:
Used Fryma model VME-20 stainless steel contact parts homogenizing mixer. Vessel has internal diameter 360 mm X 370 mm length of straight side. Total volume of mixing pan about 37 l. Working volume in range from 10 to 20 litres. Mixing pan is able to work on vacuum. Heating jacket is rated for work on 0.5 bar pressure. Unit is …Year:
Used universal mixer/cutter by Robot Coupe model R60. Machine has stainless steel mixing bowl with internal dimensions: diameter 45 cm x length of straight side 38 cm. Total volume 60 l. Working output – maximal batch for emulsifing 36 kg, maximal batch for chopping – up to 25 kg, maximal batch on dough (60% hydrated) – up to 30 kg. …Year: 2014
Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm …