Nestal SynErgy-900-230 Injection moulding machine

SynErgy 900 - 230 from 2003
410 x 410 mm
35 mm screw
123 m3
1890 bar pressure.

Special equipment:
- TH 3017 / TH 3018 max. 60 ° C
- TH 4017 / TH 4018 max. 60 ° C
- Oil temperature TH 900 = 45 ° C
- 12 control loops for tool heating 4x3.3kW / 8x0.75kW
on HAN 24E power and sensor together
on X2049 / X2050 (sheet 160)
- S9001 key switch for ext. Oil filtration (Bl. 245)
- X2001 HAN 16A BDE Interface (Bl. 660)
- X9028 HAN 10A color conveyor. with changeover contact (sheet 670)
- X2730 Schuko L + N + PE 10A at LS via main switch. (Bl. 60)
- X2790 Cekon 3L + N + PE 32A on the operator side with motor over
Main switch special No. 271-6 (Bl. 60)
Label: 32A / tool heating
- X9110 Cekon 3L + N + PE 16A on the operator side with positive locking

N00010 closing force in kN - SynErgy 900
N00020 injection unit - injection unit 230
N00030 machine drive - 30 kW drive power
N00040 hydraulic metering drive - oil motor 110 cm3 (315Nm)
N00060 plastification (bar / cm3) - 35-23D HiM, (1890/123)
N01130 Form locking control - selected
N01160 Tool installation height - mold heights 200-500mm
N01190 Protective roof version - doors v / h, closed at the top
N01240 Hydraulic 1 (ejector 1) - central ejector, controlled
N01340 switching stage 1 - 1 air valve, 890l
N01380 switching stage 5 - 1 air valve, 890l
N01390 switching stage 6 - 1 air valve, 890l
N01590 General Enabling switching stages - blowing functions with open SV
N01610 Blowing function with open SV release switching stages 1-4
N01680 Oil cooling - water inlet temp. 30 °
N01700 Plug type tool heating - plug version HAN
24E
N01710 Tool heater control. 3.3kW - 4 control loops
N01720 Tool heater control. 0.75kW - 8 control loops
N01760 Cooling water 1, rear FS - cube connector, rear under FS
N01780 Cooling water 2, DFP rear - cube connector, rear under DFP
N01800 Connection heating / cooling devices - 2 connections
N01860 Screen language - German
N02050 GraphTrack with trackball - selected
N02160 Interface color conveyor - selected
N02220 Main switch sockets, 2x16A - selected: 3P + MP + E,
Type CEKON
N02260 Sockets main switch, 2x10A - selected: P + MP + E,
Schuko type
N02770 Tool monitoring also on DFP - selected