Price on request
Make an offer| Force | 2000 T |
| Stroke length | 305 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 1310.0 × 121.0 × 5400.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | National Maxipress |
| Last availability date | 02/04/2026 |
This listing features a National Maxipress forging press with a substantial capacity of 2000 tons, designed for heavy industrial forging applications. Manufactured in 1970, the machine stands at a height of 5400 mm, with a length of 1310 mm and a width of 121 mm. It offers a stroke length of 305 mm and operates at a stroke rate of approximately 60 strokes per minute. The press includes a shut height of 889 mm and a wedge adjustment capability of 16 mm, allowing for precise control during forging operations.
The ram face measures 42 inches by 42 inches, and the die seat dimensions are 54 inches front-to-back and 47 1/2 inches right-to-left, providing ample space for various tooling setups. The floor space required for installation is roughly 12 feet 1 inch by 13 feet 10 inches, with the machine's height above the floor reaching 17 feet 9 inches (5.40 meters).
Equipped with a 150 HP motor, the press has a net weight of approximately 150 tons and a boxed weight of 161 tons. The machine features a large blue painted frame prominently marked with "NATIONAL" and "MAXIPRESS" branding. It includes a control panel with multiple buttons and switches mounted on the side for operational control.
The press is fitted with a large flywheel on the left side and a yellow circular component on top, which is connected with hydraulic or pneumatic pipes and fittings. Protective metal cages and wire guards are installed around certain pipes, cables, and mechanical parts to enhance safety.
The machine shows visible signs of industrial use, including wear, dirt, paint wear, and some rust spots on metal surfaces. The pressing area exhibits heavy use with grease, dirt, wear marks, and metal debris, along with oil or grease stains. Metal clamps and fixtures are attached near the base plate, and electrical components such as motors, pumps, and wiring are visible.
This robust forging press is offered in a quantity of two and is suitable for buyers seeking heavy-duty forging equipment with extensive operational features and a solid industrial build.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 2000 tons,
Stroke : 305 mm,
Stroke per minutes : 60
Shut height : 889 mm,
Wedge adjustment : 16 mm,
Die seat F-B, R-L : 54", 47 1/2"
Ram face F-B, R-L : 42", 42"
Floor space F-B, R-L : 12'1", 13'10"
Height above floor : 17'9" (5.40m)
Motor HP : 150,
Net weight : 150 tons,
Boxed weight : 161 tons.
Quantity no 2.
Item Condition: Good condition
Capacity Tons: 2000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Forging Equipment
Capacity : 2000 tons,
Stroke : 305 mm,
Stroke per minutes : 60
Shut height : 889 mm,
Wedge adjustment : 16 mm,
Die seat F-B, R-L : 54", 47 1/2"
Ram face F-B, R-L : 42", 42"
Floor space F-B, R-L : 12'1", 13'10"
Height above floor : 17'9" (5.40m)
Motor HP : 150,
Net weight : 150 tons,
Boxed weight : 161 tons.
Quantity no 2.
Item Condition: Good condition
Capacity Tons: 2000
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | 2000 T |
| Stroke length | 305 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 1310.0 × 121.0 × 5400.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | National Maxipress |
| Last availability date | 02/04/2026 |
This listing features a National Maxipress forging press with a substantial capacity of 2000 tons, designed for heavy industrial forging applications. Manufactured in 1970, the machine stands at a height of 5400 mm, with a length of 1310 mm and a width of 121 mm. It offers a stroke length of 305 mm and operates at a stroke rate of approximately 60 strokes per minute. The press includes a shut height of 889 mm and a wedge adjustment capability of 16 mm, allowing for precise control during forging operations.
The ram face measures 42 inches by 42 inches, and the die seat dimensions are 54 inches front-to-back and 47 1/2 inches right-to-left, providing ample space for various tooling setups. The floor space required for installation is roughly 12 feet 1 inch by 13 feet 10 inches, with the machine's height above the floor reaching 17 feet 9 inches (5.40 meters).
Equipped with a 150 HP motor, the press has a net weight of approximately 150 tons and a boxed weight of 161 tons. The machine features a large blue painted frame prominently marked with "NATIONAL" and "MAXIPRESS" branding. It includes a control panel with multiple buttons and switches mounted on the side for operational control.
The press is fitted with a large flywheel on the left side and a yellow circular component on top, which is connected with hydraulic or pneumatic pipes and fittings. Protective metal cages and wire guards are installed around certain pipes, cables, and mechanical parts to enhance safety.
The machine shows visible signs of industrial use, including wear, dirt, paint wear, and some rust spots on metal surfaces. The pressing area exhibits heavy use with grease, dirt, wear marks, and metal debris, along with oil or grease stains. Metal clamps and fixtures are attached near the base plate, and electrical components such as motors, pumps, and wiring are visible.
This robust forging press is offered in a quantity of two and is suitable for buyers seeking heavy-duty forging equipment with extensive operational features and a solid industrial build.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Преса National Maxipress
Lis National Maxipress
National Maxipress Presse
National Maxipress Presse
Πρέσα National Maxipress
National Maxipress Press
Prensa National Maxipress
Presse National Maxipress
Preša National Maxipress
National Maxipress Prés
Pressa National Maxipress
National Maxipress Presas
National Maxipress Pers
Prasa National Maxipress
Prensa National Maxipress
Prese National Maxipress
National Maxipress Пресс
Presa National Maxipress
National Maxipress Press
Pres National Maxipress
EN
- Languages
English (GB)