Price on request
Make an offer| Force | 700 T |
| Stroke length | 200 mm |
| Table length | 600 mm |
| Table width | 975 mm |
| ------------------- | |
| Length x width x height | 2450.0 × 2600.0 × 4075.0 |
| Weight | 36500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | National Maxipress |
| Last availability date | 02/04/2026 |
This listing features a National Maxipress hot forging press with a maximum capacity of 700 tons. The press is designed for heavy industrial forging applications and has a stroke length of 200 mm. The bed size measures 600 mm in length and 975 mm in width, providing a substantial working area. The machine's overall dimensions are 2450 mm in length, 2600 mm in width, and 4075 mm in height, with a total weight of approximately 36,500 kg (36.5 tons).
The press is floor-standing and includes a ram size of 525 mm and a shut height of 550 mm. It operates with a stroke rate of up to 90 strokes per minute. Key features include bottom knock outs, vibration mounts, an air clutch, and an air brake, which contribute to its operational capabilities.
The machine shows signs of wear consistent with industrial use, including rust and dirt accumulation on metal surfaces and base areas. The press area has visible grime and metal debris, indicating heavy use. The exterior surfaces exhibit rust and dirt, and paint chipping is present, particularly on the control panel. The control panel itself contains multiple buttons and switches, including green, red, and orange push buttons labeled with functions such as "MOTOR ON," "MOTOR REVERSE," "FILL GREASE," "FORWARD," and "PUSH TO STOP."
Mechanical components such as a large flywheel mounted on the right side, mechanical linkages, electrical wiring, cables, and hoses are visible. The machine is mounted on green vibration pads on the floor. An open cavity or access panel reveals internal components and wiring, which show signs of wear and dirt. A yellow electrical switch or control box is also mounted near a mechanical lever on the machine base.
Additional accessories include bundled cables and electrical components stored on a pallet nearby, wrapped but showing signs of age and partial damage. The machine is offered in an as-is, where-is condition without additional guarantees regarding functionality or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: National Maxipress Hot Forging Press
Manufacturer: National
Model: Maxipress
Capacity: 700 tons
Stroke: 200 mm
Shut Height: 550 mm
Stroke per Minute: 90
Bed Size (Length x Width): 600 x 975 mm
Ram Size: 525 mm
Windows: 362.5 mm
Floor Standing: Yes
Knock Outs: Bottom
Vibration Mounts: Yes
Air Clutch: Yes
Air Brake: Yes
Dimensions (Length x Width x Height): 2450 x 2600 x 4075 mm
Weight: 36.5 tons
Item Condition: Good condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Item Title: National Maxipress Hot Forging Press
Manufacturer: National
Model: Maxipress
Capacity: 700 tons
Stroke: 200 mm
Shut Height: 550 mm
Stroke per Minute: 90
Bed Size (Length x Width): 600 x 975 mm
Ram Size: 525 mm
Windows: 362.5 mm
Floor Standing: Yes
Knock Outs: Bottom
Vibration Mounts: Yes
Air Clutch: Yes
Air Brake: Yes
Dimensions (Length x Width x Height): 2450 x 2600 x 4075 mm
Weight: 36.5 tons
Item Condition: Good condition
Technical Condition: As-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | 700 T |
| Stroke length | 200 mm |
| Table length | 600 mm |
| Table width | 975 mm |
| ------------------- | |
| Length x width x height | 2450.0 × 2600.0 × 4075.0 |
| Weight | 36500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | National Maxipress |
| Last availability date | 02/04/2026 |
This listing features a National Maxipress hot forging press with a maximum capacity of 700 tons. The press is designed for heavy industrial forging applications and has a stroke length of 200 mm. The bed size measures 600 mm in length and 975 mm in width, providing a substantial working area. The machine's overall dimensions are 2450 mm in length, 2600 mm in width, and 4075 mm in height, with a total weight of approximately 36,500 kg (36.5 tons).
The press is floor-standing and includes a ram size of 525 mm and a shut height of 550 mm. It operates with a stroke rate of up to 90 strokes per minute. Key features include bottom knock outs, vibration mounts, an air clutch, and an air brake, which contribute to its operational capabilities.
The machine shows signs of wear consistent with industrial use, including rust and dirt accumulation on metal surfaces and base areas. The press area has visible grime and metal debris, indicating heavy use. The exterior surfaces exhibit rust and dirt, and paint chipping is present, particularly on the control panel. The control panel itself contains multiple buttons and switches, including green, red, and orange push buttons labeled with functions such as "MOTOR ON," "MOTOR REVERSE," "FILL GREASE," "FORWARD," and "PUSH TO STOP."
Mechanical components such as a large flywheel mounted on the right side, mechanical linkages, electrical wiring, cables, and hoses are visible. The machine is mounted on green vibration pads on the floor. An open cavity or access panel reveals internal components and wiring, which show signs of wear and dirt. A yellow electrical switch or control box is also mounted near a mechanical lever on the machine base.
Additional accessories include bundled cables and electrical components stored on a pallet nearby, wrapped but showing signs of age and partial damage. The machine is offered in an as-is, where-is condition without additional guarantees regarding functionality or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Преса National Maxipress
Lis National Maxipress
National Maxipress Presse
National Maxipress Presse
Πρέσα National Maxipress
National Maxipress Press
Prensa National Maxipress
Presse National Maxipress
Preša National Maxipress
National Maxipress Prés
Pressa National Maxipress
National Maxipress Presas
National Maxipress Pers
Prasa National Maxipress
Prensa National Maxipress
Prese National Maxipress
National Maxipress Пресс
Presa National Maxipress
National Maxipress Press
Pres National Maxipress
EN
- Languages
English (GB)