Swing-beam shear: the upper deck, pushed by 2 jacks, oscillates along an axis parallel to the lower blade.
The frame and the upper apron (closed box type) ensure excellent rigidity and, therefore, constant play over the entire length of the cut.
The upper apron is made integral with the frame by means of pivots mounted on bearings, widely dimensioned and located on the neutral fiber of the flanges.
The low rake angle makes it possible to shear thin sheet edges with minimal tools.
The clearance between the blades is easily and precisely obtained by acting on a lever placed on the side of the shears.
The motorized rear gauge with visualization of the dimensions on the ELGO 9521 counter at a stroke of 1000 mm and is integral with the oscillating upper apron
The hydraulic sheet metal clamps are independent and close together at the ends for cutting narrow strips. The precision and the quality of cut also depend on the effectiveness of the sheet clamps which provide a variable clamping force in relation to the thickness and the nature of the sheet to be sheared.
The control is effected by a mobile pedal. The pressure on the pedal ensures the clamping of the sheet clamps then the descent of the slide. When you release the pedal, the slide goes up automatically. Thus, the cutting rate increases proportionally with the decrease in the cutting width.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase