Multipack banding machine F97
Automatic intermittent operation banding machine designed in compliance with GMP regulations for the packaging of products with extensible lm.
Intended mainly for the cosmetic and pharmaceutical markets, it is characterized by simplicity of design and high speed.
Brushless motorization to guarantee reliability and synchronization of movements even at high speed: Machine and motors management via PC.
Structure of the balcony machine, with a clear separation between the mechanical parts located on the back and the sliding part produced on the front of the machine.
Ergonomic structure to facilitate inspection and visibility of the workflow.
Simplicity and linearity of construction for better cleaning.
Speed, strokes and positioning of the single groups settable from PC, with automatic machine setup and extremely easy and fast format change.
Speed up to 50 bundles per minute
(a) = Product Width: From 35 to 90 mm;
(b) = Product Height: From 15 to 90 mm;
(h) = Product Length: From 75 to 155 mm;
(A) = Bundle Width: From 70 to 180 mm;
(B) = Bundle Height: From 15 to 180 mm;
(H) = Length of bundle: From 75 to 155 mm.
Coils lm PE- LD:
Internal reel diameter 75 mm.
Coil external diameter 300 mm.
Width from 40 to 100 mm.
Thickness 38 μ
Motorized reel holder unit (both upper and lower) equipped with a film retirement system around the bundle.
Automatically adjustable tension according to the product to be treated.
The welding station has been designed with particular care to ensure a high quality of the bundles both for its surface aspect and for its resistance to stretching.
The bundle is held still during welding by a mechanically operated spring presser. The welding temperature is automatically controlled by the PC.
The welding device has an adjustable stroke depending on the height of the bundle, and is controlled by a brushless motor, which can be called up automatically from a PC.
A cooling system with compressed air jets completes the supply.
The in-line carton feeding group includes:
Pair of side belts, driven by an independent motor controlled by an inverter.
Speed storable in format PC.
Lower case guides adjustable according to the b dimension of the case.
Variable stroke stacker, driven by a Brushless motor, to optimize the stroke required for elevation based on the b dimension of the carton.
Maximum load photocell.
Carton stacking hopper with side panel for quick opening to facilitate interventions on the machine.
The stacker group works with a "comb" movement.
After the first grouping has been carried out, a pusher transfers to the welding station.
Thanks to the vertical comb movement, this pusher increases the time available, avoiding waiting for the next grouping to take place.
The pusher works with a servomotor and can be set from a PC. This system allows you to work at high speeds, and allows you to pack bundles of 2 l by 5 in height, absorbing 500 incoming boxes without having to overturn the boxes in rib.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase