Price on request
Make an offer| Type | Cut to length |
| Thickness of coil plate | 3.2 mm |
| Coil weight | 5000 kg |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 08/03/2026 |
This MORGAN cut-to-length machine, model 1330 x 0.7 – 3.2 mm, is designed for processing coil plates with thicknesses ranging from 0.7 mm up to 3.2 mm. It accommodates coil weights up to 5000 kg and features a maximum shearing length of 1330 mm. The machine includes a roll feed system equipped with two rollers each with a diameter of 100 mm, and a straightening machine consisting of five rollers also each with a diameter of 100 mm. The decoiler has a capacity of 5 tons and supports coil diameters between 530 and 610 mm. Additionally, the shear component is specified as a Morgan model capable of handling 1500 mm by 3.2 mm thickness. A coil trolley with a 5-ton capacity is included to facilitate material handling. The overall footprint of the machine measures approximately 6500 mm in length and 33 mm in width.
The machine is painted green and shows signs of use with some surface wear, but it appears structurally intact and complete with no visible damage. It is equipped with multiple rollers and adjustment knobs on the top for precise material handling and processing. An electric motor with a yellow cover is attached to the machine, connected by visible wiring and orange electrical cables. A control panel labeled Rexroth is mounted on a wooden wall nearby, featuring multiple buttons, a digital display, and an emergency stop button in red, indicating safety measures are in place. Additional accessories include a yellow foot pedal or control switch hanging on the left side of the machine. Overall, the machine presents as a comprehensive system for cutting coil plates to length, with all essential components and controls visible and accessible.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Max. sheet thickness: 0.7 - 3.2 mm Max. shearing length: 1330 mm - Roll feed: 2 pc dia. 100 Walzen - Straightening machine:
5 pc. dia 100 Rools - Decoiler: 5 Ton dia. 530-610 mm Ton - Shear: Morgan 1500 x 3.2 mm Coil Trolley: 5 Ton Length: 6500 mm Width: 33.00 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 94 |
| Last activity | March 10, 2026 |
Max. sheet thickness: 0.7 - 3.2 mm Max. shearing length: 1330 mm - Roll feed: 2 pc dia. 100 Walzen - Straightening machine:
5 pc. dia 100 Rools - Decoiler: 5 Ton dia. 530-610 mm Ton - Shear: Morgan 1500 x 3.2 mm Coil Trolley: 5 Ton Length: 6500 mm Width: 33.00 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | Cut to length |
| Thickness of coil plate | 3.2 mm |
| Coil weight | 5000 kg |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 08/03/2026 |
This MORGAN cut-to-length machine, model 1330 x 0.7 – 3.2 mm, is designed for processing coil plates with thicknesses ranging from 0.7 mm up to 3.2 mm. It accommodates coil weights up to 5000 kg and features a maximum shearing length of 1330 mm. The machine includes a roll feed system equipped with two rollers each with a diameter of 100 mm, and a straightening machine consisting of five rollers also each with a diameter of 100 mm. The decoiler has a capacity of 5 tons and supports coil diameters between 530 and 610 mm. Additionally, the shear component is specified as a Morgan model capable of handling 1500 mm by 3.2 mm thickness. A coil trolley with a 5-ton capacity is included to facilitate material handling. The overall footprint of the machine measures approximately 6500 mm in length and 33 mm in width.
The machine is painted green and shows signs of use with some surface wear, but it appears structurally intact and complete with no visible damage. It is equipped with multiple rollers and adjustment knobs on the top for precise material handling and processing. An electric motor with a yellow cover is attached to the machine, connected by visible wiring and orange electrical cables. A control panel labeled Rexroth is mounted on a wooden wall nearby, featuring multiple buttons, a digital display, and an emergency stop button in red, indicating safety measures are in place. Additional accessories include a yellow foot pedal or control switch hanging on the left side of the machine. Overall, the machine presents as a comprehensive system for cutting coil plates to length, with all essential components and controls visible and accessible.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 94 |
| Last activity | March 10, 2026 |
MORGAN 1330 x 0.7 – 3.2 mm
Řezací linka / linka s podélným řezem MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm Spaltanlage
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm Slitting line / Cut to length line
Línea de corte transversal MORGAN 1330 x 0.7 – 3.2 mm
Ligne de refendage MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
Linea di taglio MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
Linia wzdłużnego cięcia taśm MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm Линия продольной резки
MORGAN 1330 x 0.7 – 3.2 mm
MORGAN 1330 x 0.7 – 3.2 mm
Dilme hattı MORGAN 1330 x 0.7 – 3.2 mm
EN
- Languages
English (GB)