Price on request
Make an offer| Capacity | 3800 T |
| Nbr of strokes/min | 90 |
| Engine Power | 18.6428 kW |
| ------------------- | |
| Length x width x height | 500.0 × 3500.0 × 5400.0 |
| Weight | 57000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Montbard Weight of ram without die : 1500 kg |
| Last availability date | 02/04/2026 |
Montbard Forging Hammer
This Montbard Forging Hammer is a substantial industrial machine designed for heavy forging applications. It features a ram weight of 1500 kg (without die) and a maximum fall height of 2225 mm, providing significant impact energy for forging processes. The hammer operates at approximately 90 strokes per minute, ensuring efficient production cycles.
The machine dimensions include a length for the falling ram of 500 mm, a width of 3500 mm, and an overall height of 5400 mm. The die holder is positioned at a height of 600 mm above the floor, and the daylight between the guides measures 650 mm, allowing for sizeable workpieces. The plate section measures 560 x 50 mm, and the anvil block weighs 30 tons, contributing to the machine's stability and forging capacity.
The forging hammer has a total tup weight of 57 tons and a maximum force with die of 3800 tons, making it suitable for demanding forging tasks. The machine is powered by motors rated at 25 HP each, with a load-free speed of 750 rpm. It requires compressed air consumption of 1450 liters per minute at a pressure range of 6 to 7.5 kg/cm².
The hammer is painted green and appears to be in good physical condition with no visible rust or damage. A motor is attached to the right side of the machine, and a yellow pulley wheel and belt system are mounted on top, indicating the mechanical drive components. The machine is situated in an industrial factory setting.
A technical manual is available for this forging hammer. Please note that the year of manufacture is not specified. This machine is offered as-is and where-is, and potential buyers should consider this in their evaluation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: Montbard Forging Hammer
Manufacturer: Montbard
Year of Manufacture: Not specified
Technical Condition: Good condition, as-is, where-is
Weight of Ram (without die): 1500 kg
Max. Height of Fall: 2225 mm
Approx. Number of Blows: 90 str/min
Daylights Between the Guides: 650 mm
Length for Falling Ram: 500 mm
Height of Die Holder (over the floor): 600 mm
Height Over the Floor: 5400 mm
Height Needed to Disassemble the Plate: 9000 mm
Width: 3500 mm
Plate Section: 560 x 50 mm
Force for Each Motor: 25 HP
Load Free Speed: 750 rpm
Compressed Air Consumption: 1450 l/mn
Compressed Air Pressure: 6 to 7.5 kg/cm²
Weight of Anvil Block: 30 tons
Total Weight of Tup: 57 tons
Max. Force with Die: 3800 kg/m
Technical Manual: Available
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Item Title: Montbard Forging Hammer
Manufacturer: Montbard
Year of Manufacture: Not specified
Technical Condition: Good condition, as-is, where-is
Weight of Ram (without die): 1500 kg
Max. Height of Fall: 2225 mm
Approx. Number of Blows: 90 str/min
Daylights Between the Guides: 650 mm
Length for Falling Ram: 500 mm
Height of Die Holder (over the floor): 600 mm
Height Over the Floor: 5400 mm
Height Needed to Disassemble the Plate: 9000 mm
Width: 3500 mm
Plate Section: 560 x 50 mm
Force for Each Motor: 25 HP
Load Free Speed: 750 rpm
Compressed Air Consumption: 1450 l/mn
Compressed Air Pressure: 6 to 7.5 kg/cm²
Weight of Anvil Block: 30 tons
Total Weight of Tup: 57 tons
Max. Force with Die: 3800 kg/m
Technical Manual: Available
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | 3800 T |
| Nbr of strokes/min | 90 |
| Engine Power | 18.6428 kW |
| ------------------- | |
| Length x width x height | 500.0 × 3500.0 × 5400.0 |
| Weight | 57000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Montbard Weight of ram without die : 1500 kg |
| Last availability date | 02/04/2026 |
Montbard Forging Hammer
This Montbard Forging Hammer is a substantial industrial machine designed for heavy forging applications. It features a ram weight of 1500 kg (without die) and a maximum fall height of 2225 mm, providing significant impact energy for forging processes. The hammer operates at approximately 90 strokes per minute, ensuring efficient production cycles.
The machine dimensions include a length for the falling ram of 500 mm, a width of 3500 mm, and an overall height of 5400 mm. The die holder is positioned at a height of 600 mm above the floor, and the daylight between the guides measures 650 mm, allowing for sizeable workpieces. The plate section measures 560 x 50 mm, and the anvil block weighs 30 tons, contributing to the machine's stability and forging capacity.
The forging hammer has a total tup weight of 57 tons and a maximum force with die of 3800 tons, making it suitable for demanding forging tasks. The machine is powered by motors rated at 25 HP each, with a load-free speed of 750 rpm. It requires compressed air consumption of 1450 liters per minute at a pressure range of 6 to 7.5 kg/cm².
The hammer is painted green and appears to be in good physical condition with no visible rust or damage. A motor is attached to the right side of the machine, and a yellow pulley wheel and belt system are mounted on top, indicating the mechanical drive components. The machine is situated in an industrial factory setting.
A technical manual is available for this forging hammer. Please note that the year of manufacture is not specified. This machine is offered as-is and where-is, and potential buyers should consider this in their evaluation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Ковашки чук „Монбар“
Kovářské kladivo Montbard
Montbard smedhammer
Montbard-Schmiedehammer
Σφυρί σφυρηλάτησης Montbard
Montbard Forging Hammer
Martillo de forja Montbard
Marteau de forge de Montbard
Montbardski kovački čekić
Montbard kovácshammer
Martello da forgiatura Montbard
Montbard kalimo plaktukas
Montbard-smeedhamer
Młot kowalski Montbard
Martelo de forja Montbard
Ciocanul de forjare Montbard
Кузнечный молот «Монбар»
Monbardov čekić za kovanje
Montbard smideshammare
Montbard Dövme Çekici
EN
- Languages
English (GB)