Price on request
View price| Turning length | 600 mm |
| Turning Ø | mm |
| Ø above the bed | 410 mm |
| Ø above transversing slide | mm |
| Length between centers | mm |
| Type of CNC | |
| X-axis | 410 mm |
| Z-axis | 280 mm |
| Max workpiece weight | kg |
| Spindle taper | |
| Spindle bore | 130 mm |
| Number of turrets | |
| Number of tools on turret | |
| Number of rotating tools | |
| Turning speed | 4000 rpm |
| Spindle motor power | kW |
| Tailstock | no |
| Bar feeder | no |
| ------------------- | |
| Length x width x height | 600.0 × 410.0 × - |
| Weight | 6800 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Monforts RNC 400 A |
| Last availability date | 13/05/2026 |
This Monforts RNC 400 A CNC horizontal turning machine, manufactured in 2001, is designed for precision turning tasks with robust construction and advanced control features. The machine offers a swing over bed of 410 mm and a turning length of 600 mm, suitable for medium-sized workpieces. It is equipped with a spindle bore diameter of 130 mm and a spindle speed reaching up to 4000 rpm, powered by a 30 kW three-phase induction motor. The machine provides X-axis travel of 410 mm and Z-axis travel of 280 mm, allowing versatile machining operations.
The turning machine features a 12-position disc turret compatible with DIN 69880 / VDI 3425/2 standards and a 40 mm shaft diameter (VDI 40), enabling efficient tool changes and multi-tool operations. The turret uses directional logic and plane gear positioning for precise tool indexing. The machine's feed drives are servo-controlled with electronic safety monitoring, delivering rapid traverse speeds of 24 m/min on both X and Z axes, and feed forces of 7.2 kN and 10.7 kN respectively.
Additional technical details include a tailstock mounted on a separate guideway with manual clamping, providing 900 mm travel, a 90 mm quill stroke, and 12,000 N force capacity. The machine incorporates hydrostatic guides on the X-axis and a 60° slant bed steel welded construction mounted on a reinforced concrete base with 3-point support for stability.
Hydraulics include a central pressure oil supply for hydrostatics and clamping, along with a hydraulic hollow clamping device accommodating up to 65 mm bar capacity. The coolant system features a 310-liter tank delivering coolant at 3 bar pressure and 40 liters per minute flow rate.
Control is managed via the Monforts Control System with a Siemens Sinumerik display, supporting DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation for up to 600 tools, constant cutting speed, and thread cutting/tapping functions. The control panel is intact and includes an emergency stop button for safety.
The machine weighs approximately 6800 kg and operates on a 3x400 V, 50 Hz power supply with a total connected load of 20.5 kW (41 kVA). Visible components include the chuck, tool holder, and a blue coiled air hose hanging on the machine door. The machine shows signs of use such as some paint chipping on the door but overall the control panel and external parts appear in good condition. This Monforts RNC 400 A is a solid choice for shops requiring reliable CNC turning capabilities with comprehensive tooling and control options.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details.Swing over bed: 410 mm
Swing over radial slide: 280 mm
Turning length: 600 mm
Spindle bearing diameter: 130 mm
Spindle nose: DIN 55026 A6
Bar capacity/material clearance: 65 mm
Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW
Max. torque: 500 Nm
Feed drive: Three-phase servo drives with electronic safety monitoring
Rapid traverse (X/Z): 24/24 m/min
Feed force (X/Z): 7.2/10.7 kN
Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force
Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning
Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm)
Coolant system: 310 L tank, 3 bar, 40 L/min
Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping
Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis)
Tool measurement setup
Chip conveyor interface (interface only)
Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA)
Counter Spindle: no
Driven Tools: no
Machine Weight: 6800 kg
Number of Axes: 2
Spindle Power: 30 kW
Spindle Speed: 4000 RPM
X-axis Travel: 410 mm
Z-axis Travel: 280 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1985 |
| Last activity | May 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details.Swing over bed: 410 mm
Swing over radial slide: 280 mm
Turning length: 600 mm
Spindle bearing diameter: 130 mm
Spindle nose: DIN 55026 A6
Bar capacity/material clearance: 65 mm
Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW
Max. torque: 500 Nm
Feed drive: Three-phase servo drives with electronic safety monitoring
Rapid traverse (X/Z): 24/24 m/min
Feed force (X/Z): 7.2/10.7 kN
Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force
Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning
Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm)
Coolant system: 310 L tank, 3 bar, 40 L/min
Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping
Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis)
Tool measurement setup
Chip conveyor interface (interface only)
Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA)
Counter Spindle: no
Driven Tools: no
Machine Weight: 6800 kg
Number of Axes: 2
Spindle Power: 30 kW
Spindle Speed: 4000 RPM
X-axis Travel: 410 mm
Z-axis Travel: 280 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Turning length | 600 mm |
| Turning Ø | mm |
| Ø above the bed | 410 mm |
| Ø above transversing slide | mm |
| Length between centers | mm |
| Type of CNC | |
| X-axis | 410 mm |
| Z-axis | 280 mm |
| Max workpiece weight | kg |
| Spindle taper | |
| Spindle bore | 130 mm |
| Number of turrets | |
| Number of tools on turret | |
| Number of rotating tools | |
| Turning speed | 4000 rpm |
| Spindle motor power | kW |
| Tailstock | no |
| Bar feeder | no |
| ------------------- | |
| Length x width x height | 600.0 × 410.0 × - |
| Weight | 6800 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Monforts RNC 400 A |
| Last availability date | 13/05/2026 |
This Monforts RNC 400 A CNC horizontal turning machine, manufactured in 2001, is designed for precision turning tasks with robust construction and advanced control features. The machine offers a swing over bed of 410 mm and a turning length of 600 mm, suitable for medium-sized workpieces. It is equipped with a spindle bore diameter of 130 mm and a spindle speed reaching up to 4000 rpm, powered by a 30 kW three-phase induction motor. The machine provides X-axis travel of 410 mm and Z-axis travel of 280 mm, allowing versatile machining operations.
The turning machine features a 12-position disc turret compatible with DIN 69880 / VDI 3425/2 standards and a 40 mm shaft diameter (VDI 40), enabling efficient tool changes and multi-tool operations. The turret uses directional logic and plane gear positioning for precise tool indexing. The machine's feed drives are servo-controlled with electronic safety monitoring, delivering rapid traverse speeds of 24 m/min on both X and Z axes, and feed forces of 7.2 kN and 10.7 kN respectively.
Additional technical details include a tailstock mounted on a separate guideway with manual clamping, providing 900 mm travel, a 90 mm quill stroke, and 12,000 N force capacity. The machine incorporates hydrostatic guides on the X-axis and a 60° slant bed steel welded construction mounted on a reinforced concrete base with 3-point support for stability.
Hydraulics include a central pressure oil supply for hydrostatics and clamping, along with a hydraulic hollow clamping device accommodating up to 65 mm bar capacity. The coolant system features a 310-liter tank delivering coolant at 3 bar pressure and 40 liters per minute flow rate.
Control is managed via the Monforts Control System with a Siemens Sinumerik display, supporting DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation for up to 600 tools, constant cutting speed, and thread cutting/tapping functions. The control panel is intact and includes an emergency stop button for safety.
The machine weighs approximately 6800 kg and operates on a 3x400 V, 50 Hz power supply with a total connected load of 20.5 kW (41 kVA). Visible components include the chuck, tool holder, and a blue coiled air hose hanging on the machine door. The machine shows signs of use such as some paint chipping on the door but overall the control panel and external parts appear in good condition. This Monforts RNC 400 A is a solid choice for shops requiring reliable CNC turning capabilities with comprehensive tooling and control options.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1985 |
| Last activity | May 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC струг Monforts RNC 400 A
CNC soustruh Monforts RNC 400 A
Monforts RNC 400 A CNC drejebænk
Monforts RNC 400 A CNC-Drehmaschine
Τόρνος CNC Monforts RNC 400 A
Monforts RNC 400 A CNC lathe
Torno CNC Monforts RNC 400 A
Tour CNC Monforts RNC 400 A
Monforts RNC 400 A CNC tokarski stroj
Monforts RNC 400 A CNC eszterga
Tornio CNC Monforts RNC 400 A
Monforts RNC 400 A CNC tekinimo staklės
Monforts RNC 400 A CNC-draaibank
Tokarka CNC Monforts RNC 400 A
Torno CNC Monforts RNC 400 A
Strung CNC Monforts RNC 400 A
ЧПУ токарный станок Monforts RNC 400 A
Monforts RNC 400 A CNC струг
Monforts RNC 400 A CNC-svarv
Monforts RNC 400 A CNC torna tezgahı
EN
- Languages
English (GB)