Price on request
View price| Metal length | 3050 mm |
| Power | 4000 W |
| Metal width | 1525 mm |
| Type | Fiber |
| Option to cut tubes | no |
| CNC | no |
| CNC type | |
| ------------------- | |
| Weight | 8900 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | under power |
| Last availability date | 20/12/2025 |
This Mitsubishi ML 3015 EX-F40 fiber laser cutting machine is designed for precise and efficient cutting of various metals. It features a laser power of 4 kW, capable of cutting ordinary steel up to 25 mm thick, stainless steel up to 20 mm, aluminum up to 15 mm, brass up to 12 mm, and copper up to 6 mm. The machine accommodates metal sheets with maximum dimensions of 3050 mm in length and 1525 mm in width, supporting a maximum sheet weight of 950 kg.
The machine offers high positioning accuracy, with 0.05 mm per 500 mm in the X and Y axes and 0.1 mm per 100 mm in the Z axis, and repeatability of ±0.01 mm in X and Y axes. It has a maximum travel speed of 100 m/min, increasing to 140 m/min during simultaneous X and Y axis operation. The exchange table stands 880 mm high and has an exchange time of approximately 30 seconds.
Equipped with a movable optics working head, the laser source is a YLS-4000-ML model. The CNC control system is the Mitsubishi M700, complemented by SigmaNEST CAD/CAM software with nesting functionality. The cutting head includes a zoom feature with automatic focusing, and advanced functions such as high-speed piercing (HPP), fast and precise laser on/off system (MHC-L), fast cutting in intermittent straight lines (F-CUT), and automatic path optimization (FRG).
Additional equipment includes a WALTER screw compressor, an OMEGA technotrans chiller, a TEKA filter, and an exhaust extraction system with a tilt flap. The machine features servomotors on the X and Y axes and a ball screw on the Z axis. It has three connection points for technical gases (O2, N2, air) and an automatically raised fully glass door for safety and visibility.
The machine weighs approximately 8900 kg, with a removable table weighing 2100 kg. Dimensions including the worktable are 10340 x 3130 x 2250 mm. The included rotary pillar crane is a PROMAG model rated for 1000 kg capacity. The machine is shown in a clean and well-maintained condition, with a protective safety fence on one side and a Mitsubishi Electric branded cutting head. The cutting bed has metal slats for material support, and the laser cutting process can be observed in action with sparks visible during operation. A screw compressor unit is also mounted on a large cylindrical tank with a control panel featuring a digital display and emergency stop button.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
- laser power : 4 kW
- maximum thickness of cut (ordinary steel) : 25 mm
- maximum thickness of cut (stainless steel) : 20 mm
- maximum cutting thickness (aluminum) : 15 mm
- maximum cutting thickness (brass) : 12 mm
- maximum cutting thickness (copper) : 6 mm
- maximum sheet dimensions
(L x W) : 3050 x 1525 mm
- maximum sheet weight : 950 kg
- positioning accuracy in X,Y axis : 0.05/500 mm
- accuracy of positioning in Z axis : 0.1/100 mm
- repeatability of positioning in X,Y axis : ± 0.01 mm
- maximum travel speed : 100 m/min
- travel speed at simultaneous
operation of X and Y axis drives : 140 m/min
- height of exchange table : 880 mm
- exchange table time : approx. 30 s
- running system of working head : movable optics
- working hours of laser resonator : 2750 h
- connection power : 28 kVA
- power supply : 3x 400 V; 50/60 Hz
- machine dimensions including worktable
(L x W x H) : 10340 x 3130 x 2250 mm
- weight of removable table : 2100 kg
- machine weight : 8900 kg
Laser cutting machine equipment
ML3015eX-F40(S2)
- CNC control : MITSUBISHI M700
- CAD/CAM software with NESTING function : SigmaNEST
- Zoom head cutting head with automatic focusing
- HPP function (high speed piercing function)
- MHC-L function (very fast and precise laser on/off system
laser beam on and off)
- F-CUT function (fast cutting in intermittent straight lines
using the MHC-L system,
without the need to stop the head at the insertion and exit points)
- FRG function (automatic optimization of the cutting path with F-CUT function)
- screw compressor : WALTER
- rotary pillar crane : PROMAG 1000 KG
- chiller : OMEGA technotrans
- filter : TEKA
- laser source : YLS-4000-ML
- servomotors in X and Y axis
- ball screw in Z axis
- exhaust extraction system with tilt flap system
- vacuum slings for sheet metal transport
- barcode scanner
- 3 connection points for technical gases (O2, N2, air)
- automatically raised fully glass door
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | May 31, 2026 |
- laser power : 4 kW
- maximum thickness of cut (ordinary steel) : 25 mm
- maximum thickness of cut (stainless steel) : 20 mm
- maximum cutting thickness (aluminum) : 15 mm
- maximum cutting thickness (brass) : 12 mm
- maximum cutting thickness (copper) : 6 mm
- maximum sheet dimensions
(L x W) : 3050 x 1525 mm
- maximum sheet weight : 950 kg
- positioning accuracy in X,Y axis : 0.05/500 mm
- accuracy of positioning in Z axis : 0.1/100 mm
- repeatability of positioning in X,Y axis : ± 0.01 mm
- maximum travel speed : 100 m/min
- travel speed at simultaneous
operation of X and Y axis drives : 140 m/min
- height of exchange table : 880 mm
- exchange table time : approx. 30 s
- running system of working head : movable optics
- working hours of laser resonator : 2750 h
- connection power : 28 kVA
- power supply : 3x 400 V; 50/60 Hz
- machine dimensions including worktable
(L x W x H) : 10340 x 3130 x 2250 mm
- weight of removable table : 2100 kg
- machine weight : 8900 kg
Laser cutting machine equipment
ML3015eX-F40(S2)
- CNC control : MITSUBISHI M700
- CAD/CAM software with NESTING function : SigmaNEST
- Zoom head cutting head with automatic focusing
- HPP function (high speed piercing function)
- MHC-L function (very fast and precise laser on/off system
laser beam on and off)
- F-CUT function (fast cutting in intermittent straight lines
using the MHC-L system,
without the need to stop the head at the insertion and exit points)
- FRG function (automatic optimization of the cutting path with F-CUT function)
- screw compressor : WALTER
- rotary pillar crane : PROMAG 1000 KG
- chiller : OMEGA technotrans
- filter : TEKA
- laser source : YLS-4000-ML
- servomotors in X and Y axis
- ball screw in Z axis
- exhaust extraction system with tilt flap system
- vacuum slings for sheet metal transport
- barcode scanner
- 3 connection points for technical gases (O2, N2, air)
- automatically raised fully glass door
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Metal length | 3050 mm |
| Power | 4000 W |
| Metal width | 1525 mm |
| Type | Fiber |
| Option to cut tubes | no |
| CNC | no |
| CNC type | |
| ------------------- | |
| Weight | 8900 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | under power |
| Last availability date | 20/12/2025 |
This Mitsubishi ML 3015 EX-F40 fiber laser cutting machine is designed for precise and efficient cutting of various metals. It features a laser power of 4 kW, capable of cutting ordinary steel up to 25 mm thick, stainless steel up to 20 mm, aluminum up to 15 mm, brass up to 12 mm, and copper up to 6 mm. The machine accommodates metal sheets with maximum dimensions of 3050 mm in length and 1525 mm in width, supporting a maximum sheet weight of 950 kg.
The machine offers high positioning accuracy, with 0.05 mm per 500 mm in the X and Y axes and 0.1 mm per 100 mm in the Z axis, and repeatability of ±0.01 mm in X and Y axes. It has a maximum travel speed of 100 m/min, increasing to 140 m/min during simultaneous X and Y axis operation. The exchange table stands 880 mm high and has an exchange time of approximately 30 seconds.
Equipped with a movable optics working head, the laser source is a YLS-4000-ML model. The CNC control system is the Mitsubishi M700, complemented by SigmaNEST CAD/CAM software with nesting functionality. The cutting head includes a zoom feature with automatic focusing, and advanced functions such as high-speed piercing (HPP), fast and precise laser on/off system (MHC-L), fast cutting in intermittent straight lines (F-CUT), and automatic path optimization (FRG).
Additional equipment includes a WALTER screw compressor, an OMEGA technotrans chiller, a TEKA filter, and an exhaust extraction system with a tilt flap. The machine features servomotors on the X and Y axes and a ball screw on the Z axis. It has three connection points for technical gases (O2, N2, air) and an automatically raised fully glass door for safety and visibility.
The machine weighs approximately 8900 kg, with a removable table weighing 2100 kg. Dimensions including the worktable are 10340 x 3130 x 2250 mm. The included rotary pillar crane is a PROMAG model rated for 1000 kg capacity. The machine is shown in a clean and well-maintained condition, with a protective safety fence on one side and a Mitsubishi Electric branded cutting head. The cutting bed has metal slats for material support, and the laser cutting process can be observed in action with sparks visible during operation. A screw compressor unit is also mounted on a large cylindrical tank with a control panel featuring a digital display and emergency stop button.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | May 31, 2026 |
машина за лазерно рязане MITSUBISHI ML 3015 EX-F40
Řezačka - laserový řezací stroj MITSUBISHI ML 3015 EX-F40
MITSUBISHI ML 3015 EX-F40 laserskæremaskine
MITSUBISHI ML 3015 EX-F40 Laserschneidmaschine
μηχανή κοπής λέιζερ MITSUBISHI ML 3015 EX-F40
MITSUBISHI ML 3015 EX-F40 laser cutting machine
Máquina de corte por láser MITSUBISHI ML 3015 EX-F40
Machine de découpe laser MITSUBISHI ML 3015 EX-F40
stroj za lasersko rezanje MITSUBISHI ML 3015 EX-F40
MITSUBISHI ML 3015 EX-F40 lézervágó gép
Impianto taglio laser MITSUBISHI ML 3015 EX-F40
lazerinio pjovimo mašina MITSUBISHI ML 3015 EX-F40
MITSUBISHI ML 3015 EX-F40 Laser snij machine
Wycinarka laserowa MITSUBISHI ML 3015 EX-F40
máquina de corte a laser MITSUBISHI ML 3015 EX-F40
mașină de tăiat cu laser MITSUBISHI ML 3015 EX-F40
MITSUBISHI ML 3015 EX-F40 Станок для лазерной резки
mašina za lasersko sečenje MITSUBISHI ML 3015 EX-F40
MITSUBISHI ML 3015 EX-F40 laserskärmaskin
Lazer kesim makinesi MITSUBISHI ML 3015 EX-F40
EN
- Languages
English (GB)