Showing 1 - 20 out of 71
Year:
MITUTOYO - BRTA916 - softver: MCOSMOS v4.1 - X axis: 900 mm - Y axis: 1600 mm - Z axis: 600 mm - probe and associated controller replaced in: 2019 - new joystick from 2020Year: 2016
- ZEISS O-SELECT digital measuring projector Measurement range (Field of View): X = 114 mm, Y = 91.5 mm Maximum component height = 65mm Length measurement deviation according to ISO 10360-7: 2011 MPE_EB XY (2D) (OT) = (4.5 + L / 100) μm Permissible temperature range for specifications 18-22 ° C - Megapixel camera with CAA corrected optics - Integrated …Year:
Type: Titanus 6 Producer: Microtecnica Made in: Characteristic: Diameter: 195 mm Maximum load: 9 kg Block speed: 6 1/minYear:
- PEXIT profile projector + storage foot T&O SW3000 2-axis display 116X60X160cm 10x magnificationYear: 2001
Used Karl Suss Microtec + Karl SUSS Probehead PH250HF + Edmund Optic Probehead and Probe Arm DESCRIPTION The SUSS PA200 Semiautomatic Probe System is very stable, modular and flexible probe systems for wafers and substrates up to 200 mm (8). The standard ProberBench® Operating System provides ease of use and programmed automation for the most demanding analytical applications. The modular …Year:
The Keysight 4156C Precision Semiconductor Parameter Analyzer is a highly accurate laboratory bench top solution for advanced device characterization. The 41501B Expander extends your capabilities to 1A/200V, and add a low noise ground unit and dual pulse generators on the 4156C General features -Highly accurate laboratory bench top parameter analyzer for advanced device characterization -4x High-resolution SMU, 2xVSU and 2xVMU …Year:
The SUSS PH250HF is specially designed to meet the strict demands of high frequency probing. Its rigid design is however also useful for special requirements in analytical and production probing such as holding large area detectors for optoelectronics applications. The PH250HF has a travel range of 25mm on both the X and Y axis, and 10mm in Z. All movement …Year:
The GGB Industries, Inc., MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz. With its individually spring loaded, Beryllium-Copper, Tungsten, or Nickel tips, the Model 40A provides reliable contacts, …Year:
Karl Suss Probe Station PA200HS The SUSS PA200 Semiautomatic Probe System is very stable, modular and flexible probe systems for wafers and substrates up to 200 mm (8) PA200HS Accessories: 1.Joystick, 2. Control Module 3. Transformer 4, Microscope 5. Light Source 6. Isolation Table 7. XYZ Translation Stage 8. Probe Arm 9. Optional Upgrade (Temptronics TPO3010B or TPO3500 (extended version) …Year:
The GGB Industries, Inc., MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz. With its individually spring loaded, Beryllium-Copper, Tungsten, or Nickel tips, the Model 40A provides reliable contacts, …Year:
The TP03500 Series ThermoChuck System is a revolutionary high-performance platform providing exceptional flatness, parallelism, mechanical and thermal stability over a wide temperature range for the high precision testing of wafers at the wafer probing station. The chuck design is based on new, patented1 technologies from Temptronic Corporation. The TP03500 System consists of a low noise controller; a temperature-controlled vacuum chuck …Year:
ThermoChuck Systems are essential for probing, characterization and failure analysis of wafers, chips and hybrids at temperatures required for either commercial or MilSpec testing. They also allow the testing of high power chips at ambient and other temperatures. The TP03010 Systems consist of a single rack mountable controller/heat exchanger unit and a temperature controlled vacuum chuck assembly. The systems are …Year:
E3631A 80W Triple Output Power Supply, 6V, 5A & ±25V, 1A Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed …Year: 2008
Benefits Unique combination of ground microphone and tracer gas detector Everything included in a set (control unit, ground microphone, H2 sensor) Highest location precision due to visualisation of up to nine measuring points (gas concentration / sound) Highest sensitivity for tracer gas detection With the modern series of Hydrolux equipment HL 500 H2 and HL 5000 H2, you can find …Year: 1997
Manufacturer: Zoller Year of Manufacture/SO/GO: 1997/-/- Description: Machine for measuring milling tools.Year: 2019
This Mitutoyo CRYSTA-APEX S574 measuring machine was built in the year 2019 in Germany. It is equipped with a standalone PC with software. The machine has a Resolution of 0.0001 mm. Machine width: 1082 mm Machine depth: 1191 mm Machine height: 2185 mm Machine weight: 625 kg X-Axis Movement: 500 mm Y-Axis Movement: 700 mm Z-Axis Movement: 400 mm Workpiece …Year: 2005
MAIN DATA: Model: POLI GLOBO Build year: 2005 Producer: HEXAGON METROLOGY SPA ITALIA Axys travel: X=2200 Y=1600 Z=1400 Dimensions: ~ X=3700 Y=2620 Z=3100 Weight: estimated 3000Kg Building materials: Guides made in granite and aluminium CONDITIONS: State: Very Good Worked hours: "The machine has been kept in excellent condition and used for only 2500 hours of work until year 2020. From …Year:
Starrett Sigma HF600 Horizontal Floor Standing Comparator, with 3 axes DRO, Quadra Check 200, joy stick control, lenses 50 , 20, 10, 20, 100. (2) tail centres, manuals, and accessoriesYear:
profiles projector mod. PJ h 3000 F prompt deliveryYear: 2003
Fully functional and flawless It would be serviced annually Manufacturer Fischer Model XDVM Year of Manufacture 2003