Used Karl Suss PA200

Year: 2001

Used Karl Suss Microtec + Karl SUSS Probehead PH250HF + Edmund Optic Probehead and Probe Arm DESCRIPTION The SUSS PA200 Semiautomatic Probe System is very stable, modular and flexible probe systems for wafers and substrates up to 200 mm (8). The standard ProberBench® Operating System provides ease of use and programmed automation for the most demanding analytical applications. The modular …

Cascade Microtech/Karl Suss Probe Station PA200HS with Cascade Microtech XYZ Translation Stages + Probe Armhead (4 units)

Year:

Karl Suss Probe Station PA200HS The SUSS PA200 Semiautomatic Probe System is very stable, modular and flexible probe systems for wafers and substrates up to 200 mm (8) PA200HS Accessories: 1.Joystick, 2. Control Module 3. Transformer 4, Microscope 5. Light Source 6. Isolation Table 7. XYZ Translation Stage 8. Probe Arm 9. Optional Upgrade (Temptronics TPO3010B or TPO3500 (extended version) …

Used HP/AGILENT 4156C SEMICONDUCTOR PARAMETER ANALYZER w HP/AGILENT 41501B PULSE GENERATOR MODULE

Year:

The Keysight 4156C Precision Semiconductor Parameter Analyzer is a highly accurate laboratory bench top solution for advanced device characterization. The 41501B Expander extends your capabilities to 1A/200V, and add a low noise ground unit and dual pulse generators on the 4156C General features -Highly accurate laboratory bench top parameter analyzer for advanced device characterization -4x High-resolution SMU, 2xVSU and 2xVMU …

Used Karl SUSS Probehead PH250HF (3units) + Edmund Optic Probehead (PN37980) (1unit) and Probe Arm (Lot of 4)

Year:

The SUSS PH250HF is specially designed to meet the strict demands of high frequency probing. Its rigid design is however also useful for special requirements in analytical and production probing such as holding large area detectors for optoelectronics applications. The PH250HF has a travel range of 25mm on both the X and Y axis, and 10mm in Z. All movement …

Used HP/Agilent E3631A Power Supply (Lot of 4)

Year:

E3631A 80W Triple Output Power Supply, 6V, 5A & ±25V, 1A Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed …

TP03010B Thermochuck Controller & Thermochuck 6 in ( 2 Sets Available)

Year:

ThermoChuck Systems are essential for probing, characterization and failure analysis of wafers, chips and hybrids at temperatures required for either commercial or MilSpec testing. They also allow the testing of high power chips at ambient and other temperatures. The TP03010 Systems consist of a single rack mountable controller/heat exchanger unit and a temperature controlled vacuum chuck assembly. The systems are …

USED TEMPTRONIC TITAN SERIES TPO3500 THERMOCHUCK SYSTEM & THERMAL CHUCK CONTROLLER

Year:

The TP03500 Series ThermoChuck System is a revolutionary high-performance platform providing exceptional flatness, parallelism, mechanical and thermal stability over a wide temperature range for the high precision testing of wafers at the wafer probing station. The chuck design is based on new, patented1 technologies from Temptronic Corporation. The TP03500 System consists of a low noise controller; a temperature-controlled vacuum chuck …

Used GGB Inc. RF & Semiconductor Picoprobe Model 40A-SG-150/200/250/300/450/650-DP/P Probes (Lot 13 units)

Year:

The GGB Industries, Inc., MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz. With its individually spring loaded, Beryllium-Copper, Tungsten, or Nickel tips, the Model 40A provides reliable contacts, …

Used GGB Inc. RF & Semiconductor Picoprobe Model 40A-GS-150/200/250/300/450/650/1000-DP/P Probes (Lot 16 units)

Year:

The GGB Industries, Inc., MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz. With its individually spring loaded, Beryllium-Copper, Tungsten, or Nickel tips, the Model 40A provides reliable contacts, …