Used Mikron UCP 1000 cnc vertical milling machine Verified seller

CNC: Heidenhain TNC 426PB

RACING
X axis stroke: 1.000 mm
Y axis travel: 1.000 mm
Z axis travel: 750 mm with vertical electrospindle 875 mm with horizontal electrospindle

ELECTROSPINDLE
The electrospindle can be rotated from vertical to horizontal position by means of a horizontal inclination axis. The machine thus has a universal field of use in 5-sided machining. The tilt axis is hydraulically locked in the end positions with high precision Hirth rings.
Speed ​​range: 0 - 15,000 rpm
Acceleration time at max speed: approx. 3 sec.
Power: 18 kW S1 24 kW S6
Tool socket: HSK-A63 / DIN 69063-1 DIN 69893
Max diameter of the tool: 100 mm
Support: ceramic hybrid Ø 70
Lubrication: permanent with grease
Refrigeration: water

DRIVES
Rapid speed X, Y, Z: 30 m / min
X, Y, Z stroke measurement systems: linear measurement systems
Max feeding force: kN 10
Feed speed X, Y, Z: 0 - 10,000 mm / min
TURNING TABLE
Clamping surface: Ø 1.000 x 920 mm
Table load: 800 kg
T-slots: 8x18H12.1 x hollow of direction 18 H7 (dist.100mm)
Centering hole: Ø 50 H6
Locking torque: 6,000 Nm
Mass moment of inertia: Kg 36 m2
VDI DGQ positioning insecurity: 10 ’’
Rapid speed: 15 rpm
Height of the table on the floor: ca. 1,120 mm

changer
Change principle: Double arm gripper
Number of seats: 30 with fixed or variable seat coding
Tool connection: ISO 40 / DIN 69872
Max tool diam .: 80 mm interam. occ./ 130 mm partial occ.
Max. Length of the tool: mm 300
Max.weight of the tool: 8 kg
Max load of the warehouse: 160 kg
Chip-to-chip time according to VDI 2852: approx. 9 seconds
Weight: 10.500 kg
Overall Length x Width x H: mm 4.100 x 3.000 x 3.110