Universal tool grinding machine Michael Deckel S11 with accessories and tool cabinet
clamping range :
>> Clamping area of the tool slide 500 x 180mm
>> Max. tool diameter between tips 130mm
>> Max. tool diameter with on-the-fly clamping in the universal dividing head 620mm
>> Max. tool lengths between tips 270mm
>> T-slot machine stand 12mm
>> T-slot grinding head, tool slide and accessories 8mm

range of motion:
>> commutes
Grinding stroke 190mm
Grinding stroke for spiral grinding 190mm
Cross adjustment tool slide 100mm
Vertical adjustment grinding head 325mm
Longitudinal adjustment grinding spindle 5mm
>> Rough adjustment paths
Tool carrier 220mm
Grinding head carrier 800mm
Universal dividing head on tool slide 330mm
>> swivel angle
Grinding head carrier 360 degrees
Grinding head 360 degrees
Tool carrier 360 degrees
grinding spindle:

Three-phase drive motor 1.1KW at 2800 rpm
Spindle speeds, stepless 2000 to 12000 rpm
Max. grinding wheel diameter 125mm
Max. cutting disc diameter 200mm

Dimensions:
Weight 520 kg
Dimensions (depth x width x height) 800 x 1100 x 1760mm
Required space (including operation) 2.5 x 2.3 m

Accessories and equipment:
>> Opto-electronic measuring device with microscope and digital display 1 tool cabinet with the following content:
>> Universal – dividing head SK40
>> Twist and back grinding device
>> Tailstock
>> Pivoting support finger
>> Machine vise
>> Radius grinding device SK40
>> Measuring holder
>> Motorized drive
>> intermediate storage
>> setting gauge
>> various attachment chucks
>> Support fingers for radius cutters
>> Tooth supports
>> Divider tip
>> protective hoods
>> Tool holders SK40
>> 1 set of collets as new from 1 to 17.5 mm increasing by 0.5 mm
>> Three-jaw chuck SK40
>> Dressing device
>> Grinding tool mounts
>> various grinding wheels
>> dividing slices
>> suction device
>> Machine lamp
>> various recordings and much more

To the machine :
A universal tool grinding machine from the brand Michael Deckel S11 is offered. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small series can be ground amazingly quickly, economically and flexibly, and with the greatest ease of use. The lid S11 is in excellent condition from research and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Table length 500 mm
Table width 180 mm
Spindle taper SK40
Max. spindle speed 12000 rpm
Spindle motor power 1.1 kW
Overhauled no
-------------------
Length x width x height 800.0 × 1100.0 × 1760.0
Weight 520 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2008
Offers online 49
Last activity March 28, 2024

Description

Universal tool grinding machine Michael Deckel S11 with accessories and tool cabinet
clamping range :
>> Clamping area of the tool slide 500 x 180mm
>> Max. tool diameter between tips 130mm
>> Max. tool diameter with on-the-fly clamping in the universal dividing head 620mm
>> Max. tool lengths between tips 270mm
>> T-slot machine stand 12mm
>> T-slot grinding head, tool slide and accessories 8mm

range of motion:
>> commutes
Grinding stroke 190mm
Grinding stroke for spiral grinding 190mm
Cross adjustment tool slide 100mm
Vertical adjustment grinding head 325mm
Longitudinal adjustment grinding spindle 5mm
>> Rough adjustment paths
Tool carrier 220mm
Grinding head carrier 800mm
Universal dividing head on tool slide 330mm
>> swivel angle
Grinding head carrier 360 degrees
Grinding head 360 degrees
Tool carrier 360 degrees
grinding spindle:

Three-phase drive motor 1.1KW at 2800 rpm
Spindle speeds, stepless 2000 to 12000 rpm
Max. grinding wheel diameter 125mm
Max. cutting disc diameter 200mm

Dimensions:
Weight 520 kg
Dimensions (depth x width x height) 800 x 1100 x 1760mm
Required space (including operation) 2.5 x 2.3 m

Accessories and equipment:
>> Opto-electronic measuring device with microscope and digital display 1 tool cabinet with the following content:
>> Universal – dividing head SK40
>> Twist and back grinding device
>> Tailstock
>> Pivoting support finger
>> Machine vise
>> Radius grinding device SK40
>> Measuring holder
>> Motorized drive
>> intermediate storage
>> setting gauge
>> various attachment chucks
>> Support fingers for radius cutters
>> Tooth supports
>> Divider tip
>> protective hoods
>> Tool holders SK40
>> 1 set of collets as new from 1 to 17.5 mm increasing by 0.5 mm
>> Three-jaw chuck SK40
>> Dressing device
>> Grinding tool mounts
>> various grinding wheels
>> dividing slices
>> suction device
>> Machine lamp
>> various recordings and much more

To the machine :
A universal tool grinding machine from the brand Michael Deckel S11 is offered. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small series can be ground amazingly quickly, economically and flexibly, and with the greatest ease of use. The lid S11 is in excellent condition from research and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Table length 500 mm
Table width 180 mm
Spindle taper SK40
Max. spindle speed 12000 rpm
Spindle motor power 1.1 kW
Overhauled no
-------------------
Length x width x height 800.0 × 1100.0 × 1760.0
Weight 520 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2008
Offers online 49
Last activity March 28, 2024

Here is a selection of similar machines

Michael Deckel S11 universal milling machine