M.I.C. Industries, Inc. (USA), Used 1994, MIC ABM 120 Arch Building Machine and trailer. Fully refurbished in USA in 2007 and has Caterpillar engine. 200 hours operation on it, well maintained. Current location Jordan.
ABM 120 - K Span Roll Forming Machine
Size: 9300mm × 2250mm × 2300mm
Total Weight: Approx. 11,000kg
Main Motor Power: 15.7kW forming power is 7.5kW; bending power is 3.0kW;
Power: Cutting power 3.0kW; Conical power: 2.2kW
Working Speed: Straight sheet: 15m/min Arch
Sheet: 13m/min Sewing: 6m/min
Material of rollers: 45# steel, quenched HRC 58-62
Material of roller shafts: 45# steel, adjusted
Material of cutting blade: Cr12 steel
PLC Type: Germany Siemens
Step of rollers: 13 steps Feeding
Width: 600mm (Effective Width: 305mm)
The depth of the groove: 132mm
Thickness of the coil: 0.6-1.2mm
Operating factor of the panel: 51% Proper span: 18m
Minimum Span: 5m
Maximum Span: 24m
The ABM 120 K-Span roll forming machine is innovative technology used to fabricate and construct K-Span arch steel buildings based on self-supporting panels made from formed profile sections. The machine is mounted on a trailer enabling you to fabricate full length ground-to-ground panels on-site for efficient and economical construction of complete steel buildings.
The machinery rapidly fabricates self-supporting corrugated arches from galvanised steel coil. The arches are seamed together by an automatic seaming machine creating waterproof joints.
This system can be used to create complete buildings or a roof over walls. The self-supporting arches can make a clear span from 5 to 24 metres in width. It also fabricates straight ‘U’ shaped panels for any walls and flat roofs.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase