9,730 €
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
The MGWP MGP 1.5 is a welding positioner designed to handle loads with a turning and tilting capacity of 1.5 tonnes. It features a rotation speed adjustable between 0.15 and 1.5 rpm and a tilt range from 0 to 110 degrees, allowing precise positioning of workpieces. The center of gravity is set at 250mm with an eccentricity of 150mm. The unit is equipped with an electrical panel, which includes multiple buttons, switches, dials, and an emergency stop button, all located on the front of the machine. This control panel shows signs of usage but remains intact and functional. Control is managed via a push-button pendant, which is handheld and features multiple buttons and a rotary knob; the pendant shows some dirt and wear consistent with regular use. Additionally, a yellow foot pedal control with a protective cover and attached cable is included, also exhibiting signs of wear. The machine is painted blue with a spray-painted finish and has a round black rotating table with a diameter of 900mm. The overall dimensions of the positioner are approximately 1400mm in length, 1100mm in width, and 930mm in height, with a weight of 670 kilograms. The positioner uses a 415V incoming supply with a 24V control voltage and an inverter for rotation drive control. The earthing capacity is rated at 500 amps. The machine housing contains an electric motor visible on the right side. While the positioner shows minor wear marks and some paint chipping on the base, it appears structurally sound. This equipment is suitable for precise welding operations requiring reliable positioning and control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Model MGP 1.5
Capacity (Turning) 1.5 Tonne
Capacity (Tilting) 1.5 Tonne
C of G 250mm
Eccentricity 150mm
Electrical Panel Yes
Rotation Speed 0.15 – 1.5 rpm
Tilt Range 0 – 110
Incoming Supply 415
Control Voltage 24
Rotation Drive Control Inverter
Control Means Via Push Button on Pendant
Tiit Speed 75 seconds
Earthing 500 amps
Surface Preparation Griblast to SA2.5
Painting Spray Painting
Color Blue
Length 1400mm
Width 1100mm
Height 930mm
Table Diameter 900mm
Weight 670 Kgs
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 39 |
| Last activity | June 2, 2026 |
Model MGP 1.5
Capacity (Turning) 1.5 Tonne
Capacity (Tilting) 1.5 Tonne
C of G 250mm
Eccentricity 150mm
Electrical Panel Yes
Rotation Speed 0.15 – 1.5 rpm
Tilt Range 0 – 110
Incoming Supply 415
Control Voltage 24
Rotation Drive Control Inverter
Control Means Via Push Button on Pendant
Tiit Speed 75 seconds
Earthing 500 amps
Surface Preparation Griblast to SA2.5
Painting Spray Painting
Color Blue
Length 1400mm
Width 1100mm
Height 930mm
Table Diameter 900mm
Weight 670 Kgs
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
The MGWP MGP 1.5 is a welding positioner designed to handle loads with a turning and tilting capacity of 1.5 tonnes. It features a rotation speed adjustable between 0.15 and 1.5 rpm and a tilt range from 0 to 110 degrees, allowing precise positioning of workpieces. The center of gravity is set at 250mm with an eccentricity of 150mm. The unit is equipped with an electrical panel, which includes multiple buttons, switches, dials, and an emergency stop button, all located on the front of the machine. This control panel shows signs of usage but remains intact and functional. Control is managed via a push-button pendant, which is handheld and features multiple buttons and a rotary knob; the pendant shows some dirt and wear consistent with regular use. Additionally, a yellow foot pedal control with a protective cover and attached cable is included, also exhibiting signs of wear. The machine is painted blue with a spray-painted finish and has a round black rotating table with a diameter of 900mm. The overall dimensions of the positioner are approximately 1400mm in length, 1100mm in width, and 930mm in height, with a weight of 670 kilograms. The positioner uses a 415V incoming supply with a 24V control voltage and an inverter for rotation drive control. The earthing capacity is rated at 500 amps. The machine housing contains an electric motor visible on the right side. While the positioner shows minor wear marks and some paint chipping on the base, it appears structurally sound. This equipment is suitable for precise welding operations requiring reliable positioning and control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 39 |
| Last activity | June 2, 2026 |
Позиции за заваряване MGWP MGP 1.5
Svařovací polohovač MGWP MGP 1.5
MGWP MGP 1.5 Welding positioner
MGWP MGP 1.5 Schweißpositionierer
Θέσεις συγκόλλησης MGWP MGP 1.5
Used MGWP 1.5 Tonne Positioner
Posicionador de soldadura MGWP MGP 1.5
Positionneur de soudage MGWP MGP 1.5
Pozicije za zavarivanje MGWP MGP 1.5
MGWP MGP 1.5 Hegesztési pozíciók
Posizionatore di saldatura MGWP MGP 1.5
Suvirinimo padėtys MGWP MGP 1.5
MGWP MGP 1.5 Lasposities
Spawarka punktowa MGWP MGP 1.5
Posições de soldagem MGWP MGP 1.5
Poziții de sudare MGWP MGP 1.5
MGWP MGP 1.5 Сварочный кантователь
Položaji zavarivanja MGWP MGP 1.5
MGWP MGP 1.5 Svetspositioner
Kaynak konumlandırıcı MGWP MGP 1.5
EN
- Languages
English (GB)