2,150 €
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | MG TL-500-A |
| Last availability date | 09/03/2026 |
This listing is for an MG TL-500-A sheet metal machine, manufactured in 2001. The machine features a robust metal body painted in blue and yellow, though there is noticeable rust and paint chipping on several parts, indicating signs of wear consistent with its age and previous use. The machine is equipped with a transparent protective shield that includes safety stickers advising eye protection, enhancing operator safety during use. On top of the machine, there are two vertical pneumatic or hydraulic cylinders connected with colored hoses (blue and red), which are integral to its operation. A yellow protective cover with ventilation slots is positioned on the upper section, likely for cooling or protection of internal components. The control panel includes various buttons and a prominent red emergency stop button, allowing for immediate shutdown if necessary. Additionally, there is a metal box attached to the side with visible power cables, suggesting electrical connectivity and control features. The machine also has a metal frame with a round cutting or clamping surface and an adjustment handle, which may be used to set or secure materials during operation. A white plastic container with a cap secured by a metal strap is attached, possibly for lubrication or coolant purposes. Please note that the machine shows multiple areas of rust and paint wear, which may affect its condition. The operational status of the machine is not confirmed as it has not been tested. It is being offered as-is and could be suitable either for parts or for repair and use by those able to service it.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Bought at auction with the intent of being operational however it hasn’t been tested. If it doesn’t operate it could be used for parts
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Aug. 27, 2025 |
Bought at auction with the intent of being operational however it hasn’t been tested. If it doesn’t operate it could be used for parts
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | MG TL-500-A |
| Last availability date | 09/03/2026 |
This listing is for an MG TL-500-A sheet metal machine, manufactured in 2001. The machine features a robust metal body painted in blue and yellow, though there is noticeable rust and paint chipping on several parts, indicating signs of wear consistent with its age and previous use. The machine is equipped with a transparent protective shield that includes safety stickers advising eye protection, enhancing operator safety during use. On top of the machine, there are two vertical pneumatic or hydraulic cylinders connected with colored hoses (blue and red), which are integral to its operation. A yellow protective cover with ventilation slots is positioned on the upper section, likely for cooling or protection of internal components. The control panel includes various buttons and a prominent red emergency stop button, allowing for immediate shutdown if necessary. Additionally, there is a metal box attached to the side with visible power cables, suggesting electrical connectivity and control features. The machine also has a metal frame with a round cutting or clamping surface and an adjustment handle, which may be used to set or secure materials during operation. A white plastic container with a cap secured by a metal strap is attached, possibly for lubrication or coolant purposes. Please note that the machine shows multiple areas of rust and paint wear, which may affect its condition. The operational status of the machine is not confirmed as it has not been tested. It is being offered as-is and could be suitable either for parts or for repair and use by those able to service it.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Aug. 27, 2025 |
Машина за ламарина MG TL-500-A
Stroj na plech MG TL-500-A
MG TL-500-A Plademaskine
MG TL-500-A Blechbearbeitungsmaschine
Μηχανή λαμαρίνας MG TL-500-A
Mg TL-500-A slicer
Máquina para chapa metálica MG TL-500-A
Machine de tôlerie MG TL-500-A
Stroj za obradu lima MG TL-500-A
MG TL-500-A Lemezmegmunkáló gép
Macchina per la lavorazione della lamiera MG TL-500-A
Lakštinio metalo staklės MG TL-500-A
MG TL-500-A Plaatbewerkingsmachine
Maszyna do obróbki blachy MG TL-500-A
Máquina para chapas metálicas MG TL-500-A
Mașină de tablă MG TL-500-A
MG TL-500-A Листообрабатывающий станок
Mašina za lim MG TL-500-A
MG TL-500-A Plåtmaskin
Sac metal makinası MG TL-500-A
EN
- Languages
English (GB)