Price on request
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 14/11/2025 |
This listing is for an MG MH-340 hydraulic 4-roll plate bending machine designed for industrial metalworking applications. The machine is capable of bending plates up to 40 mm thick and 3,000 mm wide, making it suitable for heavy-duty plate rolling tasks. It features a dual pre-pinch planetary roll design that allows for precise bending and shaping of metal plates.
The upper roll has a length of 450 mm, supporting substantial plate sizes. The machine incorporates a conical bending device with hydraulic angular tilting of the lower rolls and a hardened sliding system, which enhances bending accuracy. Adjustable pinch pressure compensates for roll deflection under load, ensuring consistent results. Each of the two central rolls (upper and lower) is independently driven by hydraulic motors with axial gear units, providing controlled rotation. Side rolls can be adjusted independently using planetary displacement to perform double pinch plate pre-bending.
The hydraulic power is supplied by a centralized, self-enclosed unit with multiple pumps, enabling simultaneous bending operations. An automatic hydraulic speed controller manages the driven rolls and includes overload safety protection for operational safety. The control panel is centralized and mounted on wheels for mobility around the machine, equipped with electric and digital units to monitor and control working parameters.
Safety features comply with CE standards. The machine appears used but structurally intact, with some surface rust visible on the rollers. A control panel with visible buttons and switches is located on the left side of the machine, and a yellow protective cover is present on the left end of the top roller. The machine is situated indoors in an industrial workshop environment with a concrete floor and brick walls. This robust machine is suitable for demanding industrial plate bending tasks requiring precision and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
40mm x 3,000mm (1.575" x 10') 2012 MG (Italy) 4-Roll Model MH-340 Hydraulic Double Initial Pinch Plate Bending Machine
40mm x 3,000mm (1.575" x 10') 2012 MG (Italy) 4-Roll Model MH-340 Hydraulic Double Initial Pinch Plate Bending Machine.
Roll bending machine dual pre-pinch planetary
latest hydraulic technology 4 roll model MH340
(3000 x 40 mm ) year 2012 made in Italy
Capacity:
-Width of plate: 3000 mm
-thickness of plate rolling 40 mm
-thickness of plate pre-bending 32 mm
-plate yield strength 255 N/mm2.
-Rolls dimensions: -Upper roll mm. 450
pinch roll mm. 420 -side rolls mm. 360
-Surface length of the rolls mm. 3100
Installed configuration:
-Electric power 40 Hp
- Voltage North America 600 Vac.
-Rolls hardening surface treatment 54 / 58 Hrc.
-Conical bending device with hydraulic angular tilting of the lower rolls and hardened sliding system
-Adjustable pinch pressure against the plate to compensate the rolls deflection under load.
-Digital position readout on side forming rollers with memory preset position and accurate repeatability.
-Driven rolls rotation with independent hydraulic motor and axial gear unit on the two central rollers upper and lower.
-Each central roll is powered individual with axial coupling of planetary gear unit and hydraulic motor.
-Adjustment of side rolls independently one from another with planetary displacement to perform the double pinch plate pre-bending.
-Hydraulic power from centralized unit self enclosed with multiple pumps for simultaneous bending operations
-Automatic hydraulic speed controller of the driven rolls with overload safety protection.
-Operation control unit with centralized electric console movable on wheels around the machine.
The control panel is equipped with all the electric and digital units to fully control the machine and the reading of working parameters.
-Safety devices in compliance with CE norm.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 34 |
| Last activity | June 11, 2026 |
40mm x 3,000mm (1.575" x 10') 2012 MG (Italy) 4-Roll Model MH-340 Hydraulic Double Initial Pinch Plate Bending Machine
40mm x 3,000mm (1.575" x 10') 2012 MG (Italy) 4-Roll Model MH-340 Hydraulic Double Initial Pinch Plate Bending Machine.
Roll bending machine dual pre-pinch planetary
latest hydraulic technology 4 roll model MH340
(3000 x 40 mm ) year 2012 made in Italy
Capacity:
-Width of plate: 3000 mm
-thickness of plate rolling 40 mm
-thickness of plate pre-bending 32 mm
-plate yield strength 255 N/mm2.
-Rolls dimensions: -Upper roll mm. 450
pinch roll mm. 420 -side rolls mm. 360
-Surface length of the rolls mm. 3100
Installed configuration:
-Electric power 40 Hp
- Voltage North America 600 Vac.
-Rolls hardening surface treatment 54 / 58 Hrc.
-Conical bending device with hydraulic angular tilting of the lower rolls and hardened sliding system
-Adjustable pinch pressure against the plate to compensate the rolls deflection under load.
-Digital position readout on side forming rollers with memory preset position and accurate repeatability.
-Driven rolls rotation with independent hydraulic motor and axial gear unit on the two central rollers upper and lower.
-Each central roll is powered individual with axial coupling of planetary gear unit and hydraulic motor.
-Adjustment of side rolls independently one from another with planetary displacement to perform the double pinch plate pre-bending.
-Hydraulic power from centralized unit self enclosed with multiple pumps for simultaneous bending operations
-Automatic hydraulic speed controller of the driven rolls with overload safety protection.
-Operation control unit with centralized electric console movable on wheels around the machine.
The control panel is equipped with all the electric and digital units to fully control the machine and the reading of working parameters.
-Safety devices in compliance with CE norm.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 14/11/2025 |
This listing is for an MG MH-340 hydraulic 4-roll plate bending machine designed for industrial metalworking applications. The machine is capable of bending plates up to 40 mm thick and 3,000 mm wide, making it suitable for heavy-duty plate rolling tasks. It features a dual pre-pinch planetary roll design that allows for precise bending and shaping of metal plates.
The upper roll has a length of 450 mm, supporting substantial plate sizes. The machine incorporates a conical bending device with hydraulic angular tilting of the lower rolls and a hardened sliding system, which enhances bending accuracy. Adjustable pinch pressure compensates for roll deflection under load, ensuring consistent results. Each of the two central rolls (upper and lower) is independently driven by hydraulic motors with axial gear units, providing controlled rotation. Side rolls can be adjusted independently using planetary displacement to perform double pinch plate pre-bending.
The hydraulic power is supplied by a centralized, self-enclosed unit with multiple pumps, enabling simultaneous bending operations. An automatic hydraulic speed controller manages the driven rolls and includes overload safety protection for operational safety. The control panel is centralized and mounted on wheels for mobility around the machine, equipped with electric and digital units to monitor and control working parameters.
Safety features comply with CE standards. The machine appears used but structurally intact, with some surface rust visible on the rollers. A control panel with visible buttons and switches is located on the left side of the machine, and a yellow protective cover is present on the left end of the top roller. The machine is situated indoors in an industrial workshop environment with a concrete floor and brick walls. This robust machine is suitable for demanding industrial plate bending tasks requiring precision and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 34 |
| Last activity | June 11, 2026 |
Машина за огъване на тръби MG MH-340
Ohýbačka trubek MG MH-340
MG MH-340 Rørbukkemaskine
MG MH-340 Rohrbiegemaschine
Μηχανή κάμψης σωλήνων MG MH-340
MG MH-340 Tube bending machine
Curvadora de tubo MG MH-340
Cintreuse de tubes MG MH-340
Stroj za savijanje cijevi MG MH-340
MG MH-340 Csőhajlító gép
Piegatubi MG MH-340
Vamzdžių lenkimo mašina MG MH-340
MG MH-340 Buigmachine voor buizen
Używana giętarka do rur MG MH-340
Máquina dobradeira de tubos MG MH-340
Mașină de îndoit țevi MG MH-340
MG MH-340 Трубогибочнй станок
Mašina za savijanje cevi MG MH-340
MG MH-340 Rörbockningsmaskin
Boru bükme makinası MG MH-340
EN
- Languages
English (GB)