Twin-screw extruder, parallel, counter-rotating
Producer: AMUT
Screw diameter: 92 mm
L/D ratio 28:1
Drive motor: 60 kW (400V, 50Hz, 3ph) AC
Two sets of screws (for ABS and PVC processing)
Oil unit for thermostatting of PVC screws
Number of cylinder heating zones 7
Number of heating zones of the head and adapter 5 + 1
number of cylinder cooling zones (air) 4
Without control (control components available)

The machine is in very good technical condition but does not have a control, components for rebuilding the control are available according to the list:

List of parts available for the twin-screw extruder:
1. Extruder-head connector -2 pcs
2. PARKER 75 kW main engine inverter + ProfiBus card - 1 pc
3. Contactor + fuse switch 160A – for waves. main engine -1 piece
4. Fuse switch + SSR – 60A -2 pcs
5. Fuse switch + SSR – 25A -6 pcs
6. Contactor starter ʎ/∆ + thermal fuse 6-25A - 1 pc.
7. Motor starter (magneto-thermal switch + contactor) 0.55-0.7A - 4 pcs.
8. Motor starter (magneto-thermal switch + contactor) 1.4-2A - 1 pc.
9. Motor starter (magneto-thermal switch + contactor) 0.9-1.25A - 1 pc.
10. Motor starter (magneto-thermal switch + contactor) 0.22-0.32A - 1 pc.
11. New complete vacuum pump (engine + pump) - 1 pc
12. Spare heaters for the cylinder and connector - approx. 14 pcs

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Screw diameter 92 mm
Plastifying capacity 370 kg/h
Output 270 kg/h
-------------------
Worked hours 53638 hours
Hours under power
State good
At local norms ---------
Status
Client type User – small or medium company
Active since 2023
Offers online 5
Last activity Feb. 28, 2024

Description

Twin-screw extruder, parallel, counter-rotating
Producer: AMUT
Screw diameter: 92 mm
L/D ratio 28:1
Drive motor: 60 kW (400V, 50Hz, 3ph) AC
Two sets of screws (for ABS and PVC processing)
Oil unit for thermostatting of PVC screws
Number of cylinder heating zones 7
Number of heating zones of the head and adapter 5 + 1
number of cylinder cooling zones (air) 4
Without control (control components available)

The machine is in very good technical condition but does not have a control, components for rebuilding the control are available according to the list:

List of parts available for the twin-screw extruder:
1. Extruder-head connector -2 pcs
2. PARKER 75 kW main engine inverter + ProfiBus card - 1 pc
3. Contactor + fuse switch 160A – for waves. main engine -1 piece
4. Fuse switch + SSR – 60A -2 pcs
5. Fuse switch + SSR – 25A -6 pcs
6. Contactor starter ʎ/∆ + thermal fuse 6-25A - 1 pc.
7. Motor starter (magneto-thermal switch + contactor) 0.55-0.7A - 4 pcs.
8. Motor starter (magneto-thermal switch + contactor) 1.4-2A - 1 pc.
9. Motor starter (magneto-thermal switch + contactor) 0.9-1.25A - 1 pc.
10. Motor starter (magneto-thermal switch + contactor) 0.22-0.32A - 1 pc.
11. New complete vacuum pump (engine + pump) - 1 pc
12. Spare heaters for the cylinder and connector - approx. 14 pcs

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Screw diameter 92 mm
Plastifying capacity 370 kg/h
Output 270 kg/h
-------------------
Worked hours 53638 hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2023
Offers online 5
Last activity Feb. 28, 2024

Here is a selection of similar machines

AMUT BA92 NOMAX Extrusion - Twin screw extruder