Showing 1 - 20 out of 166
Year: 1954
Machine Type: Screw Machines Year: 1954 Manufacturer: Acme-Gridley Model: RA-6 9/16`` Automatic Screw Machine Control: Condition: Good Under Power: Yes Code: A8006 Comments: Flat main tool slide Air lock up Spiral chip conveyor Universal threading clutch 4 cross slides, 5 positions MD with 10 HP, 3/60/220/440 Motor And controls connected 440V & 110V Control circuit. Acro-Feed Model 1N6-12DR 3/4`` conversion …Year:
Saws Saw is in working condition.Year: 2008
Adige ST661/3000 automatic tube trimmer with RT711/3000 collector to connect to Adige TS72/3000 saw.Year: 2018
excellent conditionYear: 2000
Machine for setting and induction flex hardening of HSS hand hack saw blades Brand: ALO Center (ALO Teknik) Model: 690-81 Serial no.: 200026 Pay off magazine. Setting machine type ALO 681. Hardening generator. Collect magazine. Machine in used untested condition. Sold as is on pictures. Schematics of generator included. Packing included.Year: 2018
Specifications: - Type: Saws, Cold & Carbide - Model: CMB-75 CNC - Brand: AMADA - Condition: Like New - Year: 2018 Description: - Cutting capacity round: 0.394" - 3.0" - Cutting capacity rectangle (W x H): 0.394" x 0.394" - 2.36" x 2.36" - Saw blade speed: 56 - 197 RPM (BY INVERTER) - Saw blade motor: 10 HP - …Year: 2012
Brand: Amada Model: HA-250W Specifications: Cutting capacity round: 1.18" - 10" Cutting capacity rectangle: 11.8" (W) x 10" (H) Workload capacity: 3,307 Lbs. Feed stroke: 15.75" (multi stroke up to 9x) Index length: 0.394" 0 141.7" Blade size: 1-1/4" x 11'6" x 0.042" Blade speed: 89 - 295 FPM Blade motor: 5 H.P. Hydraulic motor: 1 H.P. Table height: 27.6" …Year: 2005
Used AMADA FULLY AUTOMATIC CARBIDE CIRCULAR SAW , Model CM75, 2.95”, Year 2005 Brand: Amada Model: CM75 Specifications: Cutting Capacity, Round Solid @ 90 deg: 0.4” - 2.95” Cutting Capacity, Flat & Profile @ 90 deg: 0.4” x 0.4” - 2.16” x 2.16” Loading Magazine Type: Incline Loading Magazine Length: 20’ Saw Blade Dimensions: 11.2” x 1.57” x 0.08” Automatic …Year: 1988
Saws Splitter resaw with two blades: - number of blades 1-2 - maximum cutting depth of 180/280 mm - the feed rollers open at 2 x 250 mm - possibility to cut at 0 - 45 degrees - hydraulic electric motor 7.5 kW Saw Blade Diameter: 500 mm - 1750 r/m Blade Diameter: 700 mm - 1460 r/m Flow Rate: …Year: 2006
Made in: 2006 Characteristic: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare discYear: 2014
Max. cutting capacity 90° | 90 mm |
---|---|
Wheel diametre | 315 mm |
Cutting speed | 2.4 m/min |
---|
Year: 2017
Operation period: March 2018 - November 2021 Time worked: 4800 hours Cutting range (at a 90o angle and using a 315mm diameter cutting disc): - Pipe profiles Ø12÷90 mm - Rectangular profiles <65x65 mm Minimum cutting length: 12 mm Main drive power: 8 kW Cutting disc diameter: Ø250÷315 mm Cutting disc speed: 25÷215 rpm Feed speed: 0.5÷40 mm/sec Maximum material …Year: 1995
Max. cutting capacity 90° | 200 mm |
---|---|
Cutting speed | 40 m/min |
Max. cutting capacity 45° | 150 mm |
---|---|
Engine power | 3 kW |
Year: 2005
Bewo FCH-90-M Simatic OP27 Tube diameter: 8-90mm Square tubes: 80x80mm Min cutting length: 30mm Max cutting length: 3000mm Manufacturingyear: 2005 Length: 10500mm Width: 2300mmYear: 2005
Bewo FCH-90-M Simatic OP27 with deburring unit DB90 Tube diameter: 8-90mm Square tubes: 80x80mm Min cutting length: 30mm Max cutting length: 5000mm Manufacturingyear: 2002 Length: 11000mm Width: 2300mmYear: 1995
BEWO ECH 108-S Metal Saw year 1995 A review should be doneYear: 2000
Bimax automatic circular saw. Maximum cut: Ø 100mm square 70x70mm rectangle 130x50mm Disc dimensions: Ø 100-300mm, thickness 0.8-3mm. Machine in good technical condition, currently disconnected.