Showing 1 - 20 out of 59
Year: 1970
Type | Vertical |
---|---|
Module + | 30 |
Max wheel Ø | 2000 mm |
---|---|
Motor power | 20 kW |
Year:
This Agilent 83620B Signal Generator is a used, fully functional Swept Signal Generator, with a frequency range of 10MHz to 20GHz. We use this and similar Signal Generators to allow accurate testing of any device that requires an accurate frequency input. It is impossible in this short space to list all of the features of this Agilent 83620B Signal Generator …Year: 1986
Max wheel Ø | 800 mm |
---|---|
Module - | 8 |
Module + | 10 |
---|
Year:
1-used LARICK 360A PROFILE/MOULDING SANDER. 400-1800 rpm 1.5HP, 230V, 3PH. 1†dia. By 4 tall arbor. Vertical and horizontal adjustment 40 degree backward wheel tilt and 60 degree forward wheel tilt. Fence included and 33 x 36 Table.Year:
1-used UNIQUE 311 DOOR MACHINE. (2) counter rotating heads, 5HP motors, 1-1/4 dia. Spindles, dual air/oil spindles for quick change over with stacked tooling, max. cutter-head dia. 6, 40 capacity between spindles, 5 max. material width and 1 max. thickness. 230V, 3PHYear:
Smart embedding module Easy to operate Large, touch screen display Front control panel settings Preset timers for remote power up The Shandon Histocentre 3 is a two-piece modular histology embedding center. Equipped with its smart and automated features, the Histocentre highly improves the workflow in histology laboratories and increases overall productivities. The Histocentre 3 embedding system carries an excellent embedding …Year: 2010
Drager Primus Infinity Empowered Anesthesia YOM 2010 Available with or without vaporizer WORKING HOURS: MIXER : 40720 VENTILATOR : 6098 POWER : 85235Year: 1972
Type | Horizontal |
---|---|
Module + | 2.5 |
Max spindle speed | 1000 rpm |
Max wheel Ø | 120 mm |
---|---|
Module - | 0.3 |
Max gear width | 150 mm |
Year:
Type | Vertical |
---|---|
Module + | 6 |
Max spindle speed | rpm |
Max wheel Ø | 1600 mm |
---|---|
Module - | 10 |
Max gear width | 280 mm |
Year:
Type | Horizontal |
---|---|
Module + | 1.6 |
Motor power | 2.98285 kW |
Max wheel Ø | 117 mm |
---|---|
Max spindle speed | 1800 rpm |
Year:
Type | Horizontal |
---|---|
Module + | 1.6 |
Max wheel Ø | 117 mm |
---|---|
Motor power | 2.98285 kW |
Year: 1980
Type | Vertical |
---|---|
Module + | 22 |
Max gear width | 710 mm |
Max wheel Ø | 2100 mm |
---|---|
Max spindle speed | 125 rpm |
Motor power | 78 kW |
Year:
FORKARDT F 200 milling machine accessory More details about orderingYear:
Type | Vertical |
---|---|
Module + | 4 |
Max spindle speed | 500 rpm |
Max wheel Ø | 160 mm |
---|---|
Module - | 0.2 |
Year:
Type | Horizontal |
---|---|
Module + | 6 |
Max spindle speed | 500 rpm |
Max wheel Ø | 240 mm |
---|---|
Module - | |
Max gear width | 124 mm |
Year:
Type | Horizontal |
---|---|
Module + | 6 |
Max wheel Ø | 150 mm |
---|---|
Module - | 1 |