|Cutting width||260.0 mm|
|Cutting height||220.0 mm|
|Blade length||2950.0 mm|
|Blade width||0.9 mm|
|Engine power||1.8 kW|
|Table tilting in °|
|Length x width x height||- × - × -|
|Hours under power|
|At local norms||yes|
The start of the pushbutton-controlled cycle gives rise to the following operations: Closing of the vice and starting of the motor -device of the bow for the execution of the stop-stop of the motor-return of the bow-opening of the vise.
THE STANDARD MACHINE IS DELIVERED WITH
Electrical box with: fully identifiable wiring, power indicator light, padlockable main switch *, speed switch, emergency stop device *, magnetothermal protection motor guard, minimum voltage coil *, phase failure protection 24 volt low voltage control device; control handle classified IP 55 *.
Hydraulic tensioner visualized on the console of the ribbon tension values. Device for cleaning the blade with a brush.
180 ° swivel front control panel. Programming the stroke limits of the bow.
Longitudinal right / left sliding vice group, with quick docking device.
Large working surface with swivel bracket (mounted on a 265 mm bearing for Shark 282) with precision stops for 0 °, 45 °, 60 ° left and 45 ° right. See table of capacities)
Base equipped with a removable tray for the coolant (20 liters)
Electric pump for the lubrication and refrigeration of the ribbon.
Hydraulic cylinder powered by a high pressure hydraulic unit
Visualization of alarms, diagnostics, machine functions (cutting time, counting of cut pieces, blade motor absorption, head position, blade speed and tension).
Dynamic function (cut to plot) as standard.
Bi-metal tape for full and profile.
Service keys - instructions for use, maintenance and spare parts
Blades 3 Ph kW Vit. m / min Weight kg Vise mm Round Square Rectangle
0 ° 250 220 260x220
2950x27x0.9 - 1.5 / 1.8 36/72 460 285 - 45 ° (== 230 200 220x200
60 ° (== 120 80 140x100
45 ° (== 200 170 200x140
Please note that this description may have been translated automatically. Contact us for further information.