Contact us to receive an offer.
| Manufacturer | Mechatronika |
|---|---|
| Model | M60 |
| Year | |
| Location | Poland
|
The Mechatronika M60 is a pick-and-place machine designed for automated assembly tasks, featuring a distinctive blue and white housing with a transparent protective cover on top. It includes a camera-based aiming system and automatic board position correction to ensure precise component placement. The machine supports a pressure-assisted paste or glue dispenser and offers TEACH-IN or CAD data transfer capabilities.
It accommodates a stacking area of 310 x 500 mm and can handle components ranging from 0402 size up to 35 x 35 mm QFP and BGA, with a pin pitch capability of up to 0.5 mm. The component feeders are versatile, supporting 8, 12, 16, 24, and 32 tapes, SO8-PLCC84 strips, and trays. Specific feeder configurations include two feeders with 16 tracks for 8 mm tapes, one feeder with 14 tracks for 8 mm tapes plus 2 tracks for 16 mm tapes, and one feeder with 10 tracks for 8 mm tapes, 2 tracks for 12 mm tapes, and 2 tracks for 16 mm tapes, along with vibratory feeders and SO8-SO16 strip feeders.
The machine features an automatic suction cup changer with five suction cup slots and automatic suction cup pick-up and drop-off control. It operates with an XY resolution of 25 µm, measured with magnetic scales, and includes a vision system for automatic reference point recognition, component rotation of 1 degree, and defective board avoidance.
The operator interface consists of a 17" LCD monitor, keyboard, and mouse, with CAD data import functionality. Dedicated PCB and tray holders are included for secure placement.
Dimensions are 750 x 1100 x 1300 mm, with a weight of 150 kg. It requires a power supply of 230 V, 50 Hz, 400 W and an air flow of 0.6 MPa at 20 l/min, supported by built-in air and water filters.
Visible components on the machine include an emergency stop button, control knob, and pressure gauge located on the front panel. A computer unit is positioned on the lower shelf of the machine stand, while the monitor, keyboard, and mouse are mounted on the right side. The machine's internal components, including linear guide rails, belt drive system, pick-and-place head with nozzle and vacuum system, and component feeder trays, appear clean and intact. The pick-and-place head features vacuum and fluid tubes connected for operation. The machine housing shows minor scratches and wear but overall appears clean and in good condition. The protective tinted cover can be closed for safety during operation.
This Mechatronika M60 pick-and-place machine is suitable for precise and efficient PCB assembly in various production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
M60 Automated Assembly Machine - Mechatronics
Machine Features:
– Model: M60
– Camera-based aiming system
– Automatic board position correction
– Pressure-assisted paste or glue dispenser
– TEACH-IN or CAD data transfer
– 310 x 500 mm stacking area
– Components stacked: Range: 0402 to 35 x 35 mm QFP and BGA. Pin pitch: up to 0.5 mm
– Component feeders: 8, 12, 16, 24, 32 tapes, SO8-PLCC84 strips, trays
- 2 feeders with 16 tracks for 8 mm tapes
- 1 feeder with 14 tracks for 8 mm tapes and 2 tracks for 16 mm tapes
- 1 feeder with 10 tracks for 8 mm tapes, 2 tracks for 12 mm tapes and 2 tracks for 16 mm tapes, vibratory feeder, SO8-SO16 strip feeders and others
– Capacity: 2000 - 2800 components per hour
– Automatic suction cup changer, 5 suction cup slots
– Automatic suction cup pick-up and drop-off control
– XY resolution 25 μm, measurement with magnetic scales
– Vision system
– Automatic reference point recognition
– Automatic recognition and Defective board avoidance
– 1-degree component rotation
– Operator panel
– 17" LCD monitor
– Keyboard
– Mouse
– CAD data import
– Pressure dispenser
– Dedicated PCB and tray holders
– Dimensions: 750 x 1100 x 1300 mm
– Weight: 150 kg
– Power supply: 230 V, 50 Hz, 400 W
– Air flow: 0.6 MPa, 20 l/min, built-in air and water filter
GOOD CONDITION – in continuous use
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | May 29, 2026 |
M60 Automated Assembly Machine - Mechatronics
Machine Features:
– Model: M60
– Camera-based aiming system
– Automatic board position correction
– Pressure-assisted paste or glue dispenser
– TEACH-IN or CAD data transfer
– 310 x 500 mm stacking area
– Components stacked: Range: 0402 to 35 x 35 mm QFP and BGA. Pin pitch: up to 0.5 mm
– Component feeders: 8, 12, 16, 24, 32 tapes, SO8-PLCC84 strips, trays
- 2 feeders with 16 tracks for 8 mm tapes
- 1 feeder with 14 tracks for 8 mm tapes and 2 tracks for 16 mm tapes
- 1 feeder with 10 tracks for 8 mm tapes, 2 tracks for 12 mm tapes and 2 tracks for 16 mm tapes, vibratory feeder, SO8-SO16 strip feeders and others
– Capacity: 2000 - 2800 components per hour
– Automatic suction cup changer, 5 suction cup slots
– Automatic suction cup pick-up and drop-off control
– XY resolution 25 μm, measurement with magnetic scales
– Vision system
– Automatic reference point recognition
– Automatic recognition and Defective board avoidance
– 1-degree component rotation
– Operator panel
– 17" LCD monitor
– Keyboard
– Mouse
– CAD data import
– Pressure dispenser
– Dedicated PCB and tray holders
– Dimensions: 750 x 1100 x 1300 mm
– Weight: 150 kg
– Power supply: 230 V, 50 Hz, 400 W
– Air flow: 0.6 MPa, 20 l/min, built-in air and water filter
GOOD CONDITION – in continuous use
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
The Mechatronika M60 is a pick-and-place machine designed for automated assembly tasks, featuring a distinctive blue and white housing with a transparent protective cover on top. It includes a camera-based aiming system and automatic board position correction to ensure precise component placement. The machine supports a pressure-assisted paste or glue dispenser and offers TEACH-IN or CAD data transfer capabilities.
It accommodates a stacking area of 310 x 500 mm and can handle components ranging from 0402 size up to 35 x 35 mm QFP and BGA, with a pin pitch capability of up to 0.5 mm. The component feeders are versatile, supporting 8, 12, 16, 24, and 32 tapes, SO8-PLCC84 strips, and trays. Specific feeder configurations include two feeders with 16 tracks for 8 mm tapes, one feeder with 14 tracks for 8 mm tapes plus 2 tracks for 16 mm tapes, and one feeder with 10 tracks for 8 mm tapes, 2 tracks for 12 mm tapes, and 2 tracks for 16 mm tapes, along with vibratory feeders and SO8-SO16 strip feeders.
The machine features an automatic suction cup changer with five suction cup slots and automatic suction cup pick-up and drop-off control. It operates with an XY resolution of 25 µm, measured with magnetic scales, and includes a vision system for automatic reference point recognition, component rotation of 1 degree, and defective board avoidance.
The operator interface consists of a 17" LCD monitor, keyboard, and mouse, with CAD data import functionality. Dedicated PCB and tray holders are included for secure placement.
Dimensions are 750 x 1100 x 1300 mm, with a weight of 150 kg. It requires a power supply of 230 V, 50 Hz, 400 W and an air flow of 0.6 MPa at 20 l/min, supported by built-in air and water filters.
Visible components on the machine include an emergency stop button, control knob, and pressure gauge located on the front panel. A computer unit is positioned on the lower shelf of the machine stand, while the monitor, keyboard, and mouse are mounted on the right side. The machine's internal components, including linear guide rails, belt drive system, pick-and-place head with nozzle and vacuum system, and component feeder trays, appear clean and intact. The pick-and-place head features vacuum and fluid tubes connected for operation. The machine housing shows minor scratches and wear but overall appears clean and in good condition. The protective tinted cover can be closed for safety during operation.
This Mechatronika M60 pick-and-place machine is suitable for precise and efficient PCB assembly in various production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | May 29, 2026 |
Машина за автоматично поставяне Mechatronika M60
Odsazovací stroj Mechatronika M60
Mechatronika M60 Placeringsmaskine
Mechatronika M60 Bestückungsautomat
Μηχάνημα αυτόματης τοποθέτησης εξαρτημάτων Mechatronika M60
Mechatronika M60 Pick-and-place machine
Máquina de colocación Mechatronika M60
Machine de placement Mechatronika M60
Stroj za automatsko postavljanje Mechatronika M60
Mechatronika M60 Pick-and-place gép
Macchina pick and place Mechatronika M60
Automatinė montavimo mašina Mechatronika M60
Mechatronika M60 Pick-and-place machine
Automat montażowy SMD Mechatronika M60
Máquina de colocação Mechatronika M60
Mașină de plasare Mechatronika M60
Mechatronika M60 Установщик компонентов
Mašina za automatsko postavljanje Mechatronika M60
Mechatronika M60 Monteringsmaskin
Bileşen yerleştirme makinesi Mechatronika M60
EN
- Languages
English (GB)