Max dimensions of the work piece:
Diameter 900mm
Height 1,000mm
TABLE
Length 500mm
Width 500mm
Maximum weight allowed 1,000 kg
Number of M16 tapped holes 24 holes
Pitch between holes 100 mm
Ground clearance 1,300 mm
CHARACTERISTICS OF THE AXES
X axis stroke 800 mm
Y-axis stroke 800 mm
Z axis stroke 800 mm
Distance from spindle nose to table centre:
Maximum 950mm
Minimum 150mm
Distance from spindle center to table surface:
Maximum 900mm
Minimum 100mm
Fast forwards:
X, Y, Z axis, 60m/min
Axis acceleration
X, Y, Z axis, 0.7G
STANDARD SPINDLE AT 10,000 RPM
Speed 35-10,000 rpm
ISO50 tool holder attachment cone
Speed ranges 2 electronic ranges
Power for 30 minutes of processing 37KW
Power for continuous processing 30 KW
Maximum torque 525Nm
TOOL WAREHOUSE
Magazine capacity 120 tools
Tool holder cone CAT No. 50
Max tool diameter:
With adjacent tools 125 mm
Without adjacent tools 250 mm
Maximum tool weight 30 kg
Maximum tool length 500 mm
RANDOM tool selection
Tool change time (chip-chip)
For tools weighing up to 15 kg 3.5 sec
ELECTRIC POWER REQUIRED
Continuously 74 KVA
For 30 minutes 84 KVA
AIR SUPPLY REQUIRED
Pressure 5kg/cm2
Flow rate 350 lit/min

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 800 mm
Axis Y 800 mm
Axis Z 800 mm
Rotary table (4th axis) yes
CNC Mazatrol MATRIX NEXUS
Table length 500 mm
Table width 500 mm
Max. part weight 1000 kg
Number of tool pockets 60
Spindle taper ISO 50
Max. spindle speed 10000 rpm
Spindle motor power 30 kW
-------------------
Length x width x height 3350.0 × 3298.0 × 6675.0
Weight 16200 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible
Datasheet Mazak HCN 6000
Client type Reseller
Active since 2016
Offers online 20
Last activity March 25, 2024

Description

Max dimensions of the work piece:
Diameter 900mm
Height 1,000mm
TABLE
Length 500mm
Width 500mm
Maximum weight allowed 1,000 kg
Number of M16 tapped holes 24 holes
Pitch between holes 100 mm
Ground clearance 1,300 mm
CHARACTERISTICS OF THE AXES
X axis stroke 800 mm
Y-axis stroke 800 mm
Z axis stroke 800 mm
Distance from spindle nose to table centre:
Maximum 950mm
Minimum 150mm
Distance from spindle center to table surface:
Maximum 900mm
Minimum 100mm
Fast forwards:
X, Y, Z axis, 60m/min
Axis acceleration
X, Y, Z axis, 0.7G
STANDARD SPINDLE AT 10,000 RPM
Speed 35-10,000 rpm
ISO50 tool holder attachment cone
Speed ranges 2 electronic ranges
Power for 30 minutes of processing 37KW
Power for continuous processing 30 KW
Maximum torque 525Nm
TOOL WAREHOUSE
Magazine capacity 120 tools
Tool holder cone CAT No. 50
Max tool diameter:
With adjacent tools 125 mm
Without adjacent tools 250 mm
Maximum tool weight 30 kg
Maximum tool length 500 mm
RANDOM tool selection
Tool change time (chip-chip)
For tools weighing up to 15 kg 3.5 sec
ELECTRIC POWER REQUIRED
Continuously 74 KVA
For 30 minutes 84 KVA
AIR SUPPLY REQUIRED
Pressure 5kg/cm2
Flow rate 350 lit/min

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 800 mm
Axis Y 800 mm
Axis Z 800 mm
Rotary table (4th axis) yes
CNC Mazatrol MATRIX NEXUS
Table length 500 mm
Table width 500 mm
Max. part weight 1000 kg
Number of tool pockets 60
Spindle taper ISO 50
Max. spindle speed 10000 rpm
Spindle motor power 30 kW
-------------------
Length x width x height 3350.0 × 3298.0 × 6675.0
Weight 16200 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2016
Offers online 20
Last activity March 25, 2024

Here is a selection of similar machines

MAZAK HCN 6000II Machining center - horizontal